|
| 1 | Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below.Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. |
| 2 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 3 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 4 | Dismantling the damaged brick / stone masonry work in cement mortar and clearing away with carefully stacking the material useful for reuse for any thickness of wall under 3 m heights etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 5 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc |
| 6 | Supplying and Fixing of Steel type Rack with rear side packing Etc All work Completed Specification:Rack Size (3\"x1\"3\"x7\") Vertical Support 2mm Thickness Angle,Horizondal Shelf 1 mm Thickness CR Plate 6 Nos, Rear Side Plate 0.80mm Thickness CR Sheet, Bracket 2mm Thickness Sheet and Suitable Power Coated Painting Work. |
| 7 | Supplying and Fixing Cotton Sales Rack of 1\"4\" Depth using Century / equivalent18 mm Thick Plywood for all Verticals and Horizontals, 9 mm thick Plywood at backside and 4 nos of 18 mm Thick Plywood should be provided on shelves. All exposed area to be finished with 1 mm Thick premium quality Lamination. The cost including providing Teakwood Beading at all edges and necessary hardware’s etc complete. Cotton Sales Rack without Shutters |
| 8 | Supplying and Fixing Silk Sales Counter of 4’ width and 2’6” height Using Century / equivalent18 mm Thick Plywood for all Verticals and Horizontals.In the front area 2\" Projection should be provided as per drawing.Inner side should be painting using first quality two coats of enamel paint over one coat of primer and two coats of Wall Putty.The exposed surface finished with 1mm thick premium quality lamination. The cost also includes necessary plywood’s and 1 mm Thick Colour Lamination, Hardware’s such as fevicol,Screws, Nails, Tape roll etc complete as per design given in the diagram and direction of departmental officers. |
| 9 | Supplying and fixing of Cash counter back side unit as per drawing using 18 mm Thick Plywood Century or equivalent for all verticals and horizontals. The cost also includes pasting 1 mm Thick Colour Lamination in the all exposed area etc complete. |
| 10 | Supplying and fixing of Wall Panelling 50 mm X 40 mm country wood reapers at intervals of60 cm X 60 cm for frame work,the framework covered with 9 mm thickplywood. The plywood portion to be finished by 1 mm thick Colour Lamination etc complete. |
| 11 | Supplying and fixing of 1mm thick new laminate sheet using in exsting sales counter with approved colour and design including labours, materials etc., complete as directed by the departmental officers. |
| 12 | Providing and making of Plywood partition in Front Display area using 18mm thick Plywood with necessary framework and hardware materials including approved Laminate Sheets etc., complete. |
| 13 | Supplying and Fixing of Wood Polymer Composite (WPC) door with solid door frames extruded with size 75mm X 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Buld Density 750 Kg/Cum. The frame shall be fixed to the wall using 10 X 10 mm long MS screw throught the frame by using PVC fasteners. A minimum of 4 nos screw to be provided for eah vertical members, Door shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of Specified Design which is approved by Engieer-in-Charge. Both side of the shutter shall have rough sugar texture finish, aminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550 Kg/M3 moulding the thickness remains 25mm(+/-1mm) etc., complete as per thedirection of the departmental officers. |
| 14 | Supplying and fixing of 6 mm thick Looking Mirror with 6 mm plywood on backside the mirror and necessary fittings etc., complete. |
| 15 | Providing and fixing of Vinyl Wall graphics pasted on to the surface of Manequinn backdrop partition for the display and to complete in all aspects except the designing of the graphics. Graphics shall be given by the department. |
| 16 | Providing and fixing the 12mm thick Toughened Glass Partition (Saint Gobain / Equivalent) including cost of patch fittings (Droma / Ozone / Equivalent), clear weather silicon sealent for gaps, cost of handling and transportation etc complete as per the direction of the deparmental officers. |
| 17 | Providing and fixing the 12mm thick Toughened Glass Door (Saint Gobain / Equivalent) including cost of patch fittings, floor spring, 450mm length handle, lock (Droma / Ozone / Equivalent), cost of handling and transportation etc complete as per the direction of the departmental officers. Openable Door (Double side Swing) |
| 18 | Providing Gyp Board false ceiling using 12mm thick SAINT GOBIN/ Equivalent board with ISI MARK gyp board with necessary Gyp arc/Gypsum/equivalent G.I perimeter andL angle, T angle .hooks etc as per standard specification. The rate including painting two coats of Asian/ Equivalent emulsion paint over one coat of primerand putty work asper standard specification. |
| 19 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End |
| 20 | supply and fixing of 22W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 21 | supply and fixing of 1200mm (48\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\") |
| 22 | Supply and fixing of LED Strip Light etc., Complete |
| 23 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point ( 8 points / Coil) Higher End |
| 24 | Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire for Open PVC pipe power Plug point ( 8 points / Coil) Higher End |
| 25 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. |
| 26 | Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. |
| 27 | Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only. |
| 28 | Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 29 | Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 30 | Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection |
| 31 | Supply & Installation of 4 way Cassette Non-Inverter Air-Conditioner of 3.0 TR capacity with necessary materials etc., Complete (Daikin /Blue Star/ Equivalent) |
| 32 | Supply and fixing of Double Booster Voltage Stabilizer 4KVA Capacity |
| 33 | Supply and laying of 5/8\" and 3/8\" copper pipe (Extra beyond 3 metres supplied with AC unit). |
| 34 | Supply and Fixing of 3 Core 2.5 Sq.mm cable for Indoor to Outdoor connection. |
| 35 | Supply and fixing of water drain pipe line (1” PVC Pipe). |
| 36 | Supply and providing of pipeline nitrle rubber insulation for Refrigerant and drain pipe lines. |
| 37 | Supply and laying of 1\" PVC pipe on wall and ceiling (Speaker+CCTV+LAN) |
| 38 | Supply and laying of CAT6 cable in existing PVC pipe on wall and ceiling for LAN and CCTV |
| 39 | Supply and Installation of 4 MP IP indoor/ outdoor bullet/dome Camera, 120db WDR, 6mm Fixed lens. Make: Hikvision/ Equivalent |
| 40 | Supply and run of 2 core 1.5 sq.mm Loudspeaker cable with PVC pipe. Make: Orbit/Equivalent |
| 41 | Supply and Installation of 15 W High fidelity 2-way ceiling speaker with 100V.Make: Bosh/ Equivalent |
| 42 | Supply and Installation of 45 W amplifier with Mic,Aux Inputs Make: Ahuja/Equivalent |
| 43 | Providingand fixing aluminium composite panel(ACP)4sides having50x25x1.50mmframe work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 kg/sq.m and fabricated fixed at all lelevation and heights.The extruded section cutting and fixing required space extruded section shall be of6063 and alloy of BSH 9 confirming T is-63400 rate shall included to fix main frame with necessary clamps, fasteners, bolt nuts etc.the main frame of extruded section shall beof 22843&22739(H9) grade confirming toBS4174(or)IS8147.Rate shall included 3 mm thick ACP sheet (0.25+3.5+0.25) alstong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer. |
| 44 | Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails.Intial height of 3m and length of 1m |
| 45 | 1m run ane every additional height of 2.5m(5.5m) |
| 46 | 8m height in addition of 2.5m height |
| 47 | Supplying and fixing of Co-optex Name board in English and Tamil and butterfly logo and letter using 4 mm acrylic sheet and topvinyl printing with LED Lighting arrangements with necessary accessories, internal boardwiring etc complete. The rate including Thirupathi in English and tamil bottom of board ,letter with same abovematerial. |
| 48 | Supplying and Fixing Emposed Acrylic finished letters with LED illuminations. |
| 49 | Supply and fixing of High End model Chandiler light etc., Complete |
| 50 | Providing and Fixing of Hanger Mannequin stand for product Display with approved Model and Design etc., Complete |
