|
| 1 | Sub Work No. 1 - PERCOLATION WELL (6 m X 18 m)-Item No. 1 -Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. Lift0 to 1.50 Mtr.Depth |
| 2 | Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. |
| 3 | Lift 1.5 to 3.0 Mtr.Depth |
| 4 | Lift3.00to 4.50 Mtr.Depth |
| 5 | Lift 4.50 to 6.00 Mtr.Depth |
| 6 | Lift 6.00 to 7.50 Mtr.Depth |
| 7 | Lift 7.50 to 9.00 Mtr.Depth |
| 8 | Lift 9.00 to 10.50 Mtr.Depth |
| 9 | Lift 10.50 to 12.0 Mtr.Depth |
| 10 | Lift 12.00 to 13.50 Mtr.Depth |
| 11 | Lift 13.50 to 15.0 Mtr.Depth |
| 12 | Lift 15.00 to 16.50 Mtr.Depth |
| 13 | Lift 16.50 to 18.0 Mtr.Depth |
| 14 | Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for P.C.C work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complet |
| 15 | Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finssh is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .)A) For Ring BeamM-20 |
| 16 | B) Vertical wall M-20 |
| 17 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) |
| 18 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. |
| 19 | Providing structural steel work in singlestanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge ncluding cutting, fabrication, hoisting, erecting, fixing in position, makingriveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd- C-6/277) |
| 20 | 25X25X5mm chequre plate 8.00 mm thick. |
| 21 | Providing, and fixing 80 mm dia A.C./P.V.C. pipe weep holes at 1.5 M c/c staggered including cost of all materials and labour involved with all leads and lifts.etc. complete with all leads and lifts. |
| 22 | Carrying out recuperation / yeild test for ascerting the discharge of constructed well / excavated profile as direrted by Engineer in charge.The test carried out by drawing down water from the well/ profile below normal / subsoil water level upto full depth rise in water level is recorded. The normal water level / subsoil water level in the well / profile as well as strainer / suction level at pump as per design of W.S. scheme shall be recorded prior. to the test including cost of all materials.overhead,labours etc. completed as directed.The test shall be carried out as per technical circular No.2597 dt. 20/11/97 and shall be carried out for 7 days. |
| 23 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 24 | Drilling 100 mm dia bore in all soft & hard strata including all Material labour cost and machinery charges, etc. complete. |
| 25 | Sub Work No. 2 - Construction of Switch Room (2.5 X 2.5 X3.0 M)-Item No. 1 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 26 | Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 27 | Providing and laying in situ 1:3:6 (M-100) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. |
| 28 | Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) |
| 29 | Providing and casting in situ C.C. of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, from work, compaction, finishing the formed surface with CM 1:3 of sufficient minimum thickness to necessary or roughening if special finish is tobe provided and curing etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use for L&T, ACC, Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted excluding M.S. or Tor reinforcement)For RCC M-200 grade slabs / Landings / Vertical Walls/ Waist Slabs / Steps for Staircase.1) Columnin M200 |
| 30 | 2) Beam & Lintelin M200 |
| 31 | 3) Chajjain M200 |
| 32 | 4) Slabin M200 |
| 33 | Providing and fixing in position steel bar reinforcement of various diameter for RCC pipes, caps, foootings, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, copings, fins, arches, etc as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. ( including cost of binding wire ) Tor steel. |
| 34 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 35 | Providing dry trap / granite / quartzite / gneiss, rubble stone soling in 15cm to 20 cm thick layers (including hand packing and compacting), etc. complete. |
| 36 | Filling in plinth and floors / trenches with contractor’s murum for bedding in 15cm to 20cm layers including watering and compaction complete. |
| 37 | Providing internal & external electrification of switch room including cost of all material & labour shown in rate analysis etc. complete. |
| 38 | Providing 2nd Class B.B masonary with conventional bricks in CM as below in super structureinner walls / external walls including normal dewatering, striking joints on unexposed faces, raking out joints on exposed faces and watering etc complete in Cement Mortor (1:6)In Foundation & plinth |
| 39 | In Super Structure |
| 40 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) |
| 41 | Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of Ghana T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 42 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 43 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 44 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 45 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour tonew plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 46 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 47 | Providing & laying rough Shahabad Stone flooring 40mm to 50 mm thick & of required width in plain/diamond pattern on a bed of 1:6 C.M including cement float,striking joints,pointing in cement morter 1:3 curing & cleaning etc. complete ( Bd-M-1/379) |
| 48 | Sub Work No. 3 - Pure Water Pumping Machinery ( 5 HP 1W + 1S-for bus stand ESR)Item No. 1 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.5.00HP, Discharge-10848 lph, Head-39.00m |
| 49 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 65 mm dia G.I. pipe. |
| 50 | Providing & fixing of M.S. clamps for holding 65 mm dia G.I. pipe. |
| 51 | 3 core PVC insulated, PVC sheathedcopperconductor flat submersible cableSupplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.(3 core 10 sq mm) |
| 52 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE25 mm dia GI pipe |
| 53 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 54 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set upto 10 - 15 HP consisting of Star Delta starter having relay range 13-22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . 5.00 HP Pump |
| 55 | Providing tools for pumping machinary |
| 56 | Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cableSupplying and erecting, XLPE / PVC insulated, annoured cable 1100 V grade with ISi mark Four core, solid/ stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer withG.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. |
| 57 | Providing and supplying ISI standard ms flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 58 | EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 59 | Providing & fixing 100 mm dia. Pressure gauge. |
| 60 | Providing and errecting triple spurn gear Chain pully Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift , tested to 50 % over load as per IS 3832 carrying IS mark (1 MT capacity) |
| 61 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve 65 mm dia |
| 62 | Reflux valve 65 mm dia |
| 63 | Lowering, laying and fixing in proper alignment and position all types of sluice valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)Sluice valve 65 mm dia |
| 64 | Reflux valve 65 mm dia |
| 65 | Sub Work No. 4 - Pure Water Pumping Machinery ( 7.50 HP 1W + 1S-for bus stand ESR)Item No. 1 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.7.50HP, Discharge-17705 lph, Head- 47.00m |
| 66 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 65 mm dia G.I. pipe. |
| 67 | Providing & fixing of M.S. clamps for holding 65 mm dia G.I. pipe. |
| 68 | 3 core PVC insulated, PVC sheathedcopperconductor flat submersible cableSupplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.(3 core 10 sq mm) |
| 69 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE25 mm dia GI pipe |
| 70 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 71 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set upto 10 - 15 HP consisting of Star Delta starter having relay range 13-22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . 7.50 HP Pump |
| 72 | Providing tools for pumping machinary |
| 73 | Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cableSupplying and erecting, XLPE / PVC insulated, annoured cable 1100 V grade with ISi mark Four core, solid/ stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer withG.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. |
| 74 | Providing and supplying ISI standard ms flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 75 | EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 76 | Providing & fixing 100 mm dia. Pressure gauge. |
| 77 | Providing and errecting triple spurn gear Chain pully Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift , tested to 50 % over load as per IS 3832 carrying IS mark (1 MT capacity) |
| 78 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve 65 mm dia |
| 79 | Reflux valve 65 mm dia |
| 80 | Lowering, laying and fixing in proper alignment and position all types of sluice valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)Sluice valve 65 mm dia |
| 81 | Reflux valve 65 mm dia |
| 82 | Sub Work No. 5 - Pure Water Pumping Machinery ( 7.50 HP 1W + 1S-for bus stand ESR)Item No. 1 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.7.50HP, Discharge-30054 lph, Head- 25.00m |
| 83 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 65 mm dia G.I. pipe. |
| 84 | Providing & fixing of M.S. clamps for holding 65 mm dia G.I. pipe. |
| 85 | 3 core PVC insulated, PVC sheathedcopperconductor flat submersible cableSupplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.(3 core 10 sq mm) |
| 86 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE25 mm dia GI pipe |
| 87 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 88 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set upto 10 - 15 HP consisting of Star Delta starter having relay range 13-22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . 7.50 HP Pump |
| 89 | Providing tools for pumping machinary |
| 90 | Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cableSupplying and erecting, XLPE / PVC insulated, annoured cable 1100 V grade with ISi mark Four core, solid/ stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer withG.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. |
| 91 | Providing and supplying ISI standard ms flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 92 | EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 93 | Providing & fixing 100 mm dia. Pressure gauge. |
| 94 | Providing and errecting triple spurn gear Chain pully Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift , tested to 50 % over load as per IS 3832 carrying IS mark (1 MT capacity) |
| 95 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve 65 mm dia |
| 96 | Reflux valve 65 mm dia |
| 97 | Lowering, laying and fixing in proper alignment and position all types of sluice valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)Sluice valve 65 mm dia |
| 98 | Reflux valve 65 mm dia |
| 99 | Sub Work No. 6 -Pure Water Rising MainItem No. 1 - Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, includingb transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 100 | 110 mm Dia HDPE Pipe 6 Kg/sqcm |
| 101 | 140 mm Dia HDPE Pipe 6 Kg/sqcm |
| 102 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.80 mm dia GI- MClass pipe |
| 103 | 100 mm dia GI- MClass pipe |
| 104 | 125 mm dia GI- MClass pipe |
| 105 | Item No. 3ProvidingP.V.C Specialsasperstandard specifications&directionofinchargeEngineer.(10%of Item No.1) |
| 106 | Item No. 4Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete 80 mm dia. Sluice Valve |
| 107 | 100 mm dia. Sluice Valve |
| 108 | 125 mm dia. Sluice Valve |
| 109 | Item No. 5 Providing & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)80mm dia. NRV |
| 110 | 100 mm dia. NRV |
| 111 | 125 mm dia. NRV |
| 112 | Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm dia. Air Valve Single Ball Flanged PN-1 |
| 113 | Item No. 7 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering,preparingthebedforfoundationand excluding backfilling, etc. complete.SOIL |
| 114 | Item No. 8Excavationforfoundation/pipetrenchesinhardmurum and boulders, W.B.M. road including removing the excavatedmaterialup Toadistanceof50Mbeyondthe area and lifts as below, stacking and spreading as directedbyEngineer-in-charge,normaldewatering, preparingthebedforfoundationandexcludingback- filling, etc. complete.HMB |
| 115 | Item No. 9Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 116 | Item No. 10Excavation for foundation / pipe trenches in hard rock by controlledblasting,includingtrimmingandlevellingthe bedbychisellingwherenecessaryandremovingthe excavatedmaterialandstackingitinmeasurableheaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. Lift 0 to 1.5 MHARD ROCK |
| 117 | Item No.11 Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. |
| 118 | Lowering, Laying and Jointing H. D. P. E./M D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 90mm dia HDPE 6 kg/cm2 |
| 119 | 110mm dia HDPE 6 kg/cm2 |
| 120 | 140mm dia HDPE 6 kg/cm2 |
| 121 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 80mm dia GI- MClass pipe |
| 122 | 100 mm dia GI- MClass pipe |
| 123 | 125 mm dia GI- MClass pipe |
| 124 | Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge 80 mm dia. Sluice Valve |
| 125 | 100 mm dia. Sluice Valve |
| 126 | 125 mm dia. Sluice Valve |
| 127 | Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge80mm dia. NRV |
| 128 | 100 mm dia. NRV |
| 129 | 125 mm dia. NRV |
| 130 | Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc complete with initial lift of 1.50m below /above ground level. |
| 131 | Providing and fixing in position air valve shaft including providingand fixing GI Medium class or 6mm thick M.S, PIPE shaft 2.70m long over branch flange of air valve tee providing PCCblock of M- 150concrete 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged ionts wherver required and fixing of air valve over the shaft excluding cost of air vavle and branch flanged air valve tee, etc. complete as per type desihn and as per directed by Engineer - in -charge for following diameters of pipe line50mm dia. Air Valve Single Ball Flanged |
| 132 | Providing & costructing B.B masonry valve chamber with 15 cm thick 1: 3 :6 proportion PCC bedding ,excluding excavation ,B.B masonry in C.M 1:5 proportion precast RCC frame and cover etc. complete as directed by Engineer-in-charge |
| 133 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 90mm dia HDPE 6 Kg/cm2 pipe |
| 134 | 110 mm dia HDPE 6 Kg/cm2 pipe |
| 135 | 140 mm dia HDPE 6 Kg/cm2 pipe |
| 136 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.80 mm dia C.I LA Class pipe |
| 137 | 100 mm dia C.I LA Class pipe |
| 138 | 125 mm dia C.I LA Class pipe |
| 139 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 140 | Sub Work No. 7 : RCC ESR of CAPACITY 155000Ltr @ 12Mtr. stagingItem No. 1 - Designing (aesthetically), and constructing RCC elevated service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters. (Other Discription is as per Concern DSR) |
| 141 | Item No. 2 :-Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge.,100mm dia CIDF pipes |
| 142 | Item No. 3 :-Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.c) Sluice valve - PN - 1. (Without by pass arrangement) |
| 143 | Item No. 4 :-Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete.Diameter 80 mm to 300 mm |
| 144 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 65 mm dia G.I pipe medium class |
| 145 | 100 mm dia G.I pipe medium class |
| 146 | 150 mm dia G.I pipe medium class |
| 147 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 65mm dia CIDF Sluice valve |
| 148 | 100 mm dia CIDF Sluice valve |
| 149 | 125 mm dia CIDF Sluice valve |
| 150 | 150 mm dia CIDF Sluice valve |
| 151 | Item No 3 ProvidingP.V.C.Specialsasperstandard specifications&directionofinchargeEngineer.(10%of Item No.1) |
| 152 | Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. 0.0 to 1.50. |
| 153 | Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 154 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 155 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. |
| 156 | Lowerig and laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material except cement solvent, rubber ring giving satisfactory hydraullic testing as per IS Code etc complete (with cement sovlentjoint / ring fit joint working pressure 4 Kg./Sqm.) 160mm dia pvc 4 kg/cm2 |
| 157 | 140mm dia pvc 4 kg/cm2 |
| 158 | 110mm dia pvc 4 kg/cm2 |
| 159 | 90 mm dia pvc 4 kg/cm2 |
| 160 | 63 mm dia pvc 4 kg/cm2 |
| 161 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 65 mm dia G.I pipe medium class |
| 162 | 100 mm dia G.I pipe medium class |
| 163 | 150 mm dia G.I pipe medium class |
| 164 | Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.160mm dia pvc 4 kg/cm2 |
| 165 | 140mm dia pvc 4 kg/cm2 |
| 166 | 110mm dia pvc 4 kg/cm2 |
| 167 | 90 mm dia pvc 4 kg/cm2 |
| 168 | 63 mm dia pvc 4 kg/cm2 |
| 169 | Hydraulic testing of G.I.pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rates under this item shall also include cost of retesting. 65 mm dia G.I pipe medium class |
| 170 | 100 mm dia G.I pipe medium class |
| 171 | 150 mm dia G.I pipe medium class |
| 172 | Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge . 65mm dia CIDF Sluice valve |
| 173 | 100 mm dia CIDF Sluice valve |
| 174 | 125 mm dia CIDF Sluice valve |
| 175 | 150 mm dia CIDF Sluice valve |
| 176 | Providing & costructing B.B masonry valve chamber with 15 cm thick 1: 3 :6 proportion PCC bedding ,excluding excavation ,B.B masonry in C.M 1:5 proportion precast RCC frame and cover etc. complete as directed by Engineer-in-charge |
| 177 | Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. |
| 178 | Providing and laying in situ 1:2:4(M-150) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. |
| 179 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 180 | Sub Work No. 8 : Trial & Run of SchemeItem No. 1 - Commissioning running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator valveman, etc as per requirements of the scheme and who should also administer chemical dose for a period of 1 yeartogether with training of personnel spared by MJP / local body and handing over the scheme to local body after completion of the above period as directed by Engineer-in-charge. |
| 181 | Sub Work No. 8 : Estimate for Stand Alone Solar Panel-7.5 HP ,5 HP , 7.5 HPItem No. 1 - Providing Stand Alone Solar Panel With USPC system for Pumping Machinery 5.00 HP With USPC |
| 182 | 7.50 HP With USPC |
