|
| 1 | Painting two coats of old wall surface with ready mixed plastic emulsion paint (exterior) of first class quality and of approved colourincluding scaffolding etc., complete as directed by the departmental officials. |
| 2 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 3 | Brick work in following Cement Mortar using best quality of second class ground moulded chamber burnt bricks of size 9” x 41/2” x 3” for foundation and basement including curing, etc., complete complying with standard specifiction. - Above basement |
| 4 | Plastering with Cement Mortar 1:5 (One cement and Five m-sand), 12mm thick in all floors including scaffolding neatly finishing, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Re-Laying of Interlocking Concrete Block Pavement and compacted over a thin bedding sand layer of 50 mm thickness and joints shall be filled by fine sand of specified grading as per Specification etc, complete |
| 6 | Reinforced Cement Concrete 1:2:4 (One Cement,two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 7 | Supplying, erecting steel centering using M.S. Sheet of Size 90 x 60 cm and BG 10 Gauge stiffened welded with M.S. Anagle of Size 25 x 25 x 3 mm laid over Siler oak / Country wood joist of size 10 x 6.5 cm spaced at about 9 cm center to center and supported by casurina props of 10 to 13 cm dia spaced at 75 cm center to center for all type of RCC roof slab, Lintel beam, \"T\", \"L\" Beam, Landing slab, Plinth beam, Grade beam, Column footing, column, Sunshade, facia, sloped roof, waist slab etc., including necessary supports with all cross bracings, filling slits and holes in the surface ( The retrived materials should be taken back by the contractors ) and side shuttering etc., complete as directed by the federation officers and as per standard specification - Upto Basement |
| 8 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors.. |
| 9 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M-Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 10 | Supplying and fixing of Manhole cover of size 0.9 x 0.9 m heavy duty with frame for water sump incluidng material, man power, transportation, etc complete, as per the specifications. |
| 11 | Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. |
| 12 | Plain cement concrete 1:5:10 (one cement, five M-sand &Ten course aggregate) using 40mm size granite broken stones for foundation including dewatering if found necessary and laid in layers of not more than 15 cm Tk for flooring including, rendering the top surface rough to take floor finish etc and including side shuttering if required and compaction curing etc., complete and as per standard specifications. |
| 13 | Supplying, laying and jointing 1\"\" inch CPVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 14 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) |
