Tender For Renovation And Repairing Of 20 No. Quarters Of Block No. 5 And 6 Constructed In 1965 At 3Rd Rac Bikaner
Tender Value
30.66 Lakhs
Estimated cost
Bid Submission
10 Mar 2025
0 days left
EMD
61320
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bikaner → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation And Repairing Of 20 No. quarters Of Block No. 5 And 6 Constructed In 1965 At 3Rd Rac Bikaner
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction ofEngineer-in-charge.1: 4: 8 or leaner mix. |
| 3 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. |
| 4 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 5 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). |
| 6 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Add Extra if I/rail section is used |
| 8 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In lime mortar. |
| 9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 10 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 11 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). |
| 13 | Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 14 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. For area of each slab from 2001 to 5000 Sqcm |
| 15 | Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . |
| 16 | Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 12mm thick . |
| 17 | Pointing on stone slab ceiling with cement mortar 1:2 (1cement : 2 fine sand): Flush/ Ruled pointing |
| 18 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete new plastered surface (three or more coats) |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
| 20 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision new work |
| 21 | Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 22 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 23 | Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. |
| 24 | Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. |
| 25 | Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting inapproved shade with deco paint of approved quality complete as per direction of Engineer In Charge |
| 26 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" : Commercial Veneer both side 30 mm thick. |
| 27 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no 25. |
| 28 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 29 | Providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screwscomplete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : |
| 30 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 31 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. |
| 32 | Add extra for double leaf shutters 20% extra |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 34 | Supplying and fixing 7 to 8 cm thick soorsagar stone chajja in slope (3 lines fine dressed)including cutting & moulding weather dripped (both sides dressed) |
| 35 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 36 | Providingandfixing1stqualitystandardwhite,grey,ivory, fume red brown,lightgreen,lightblue and otherlight shades glazedtilesconfirmingtoIS:13753&IS:15622ofsize 200mmx300mminwalls,floors,steps,pillarsetc.laidona bedofneatcementslurryfinishedwithflushpointinginthe white cement mixed with pigment to match the shade of the tile complete(excludingthecostofcementplasteronwallsand pillar). |
| 37 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mmconfirming to IS:13755andIS:15622colour suchaswhite,grey,ivory,fumeredbrown,lightgreen,light blue and other light shades in floors, steps, pillars etc. laid on a bedofneatcementslurryfinishedwithflushpointinginthe white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 38 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500lit |
| 39 | P & F Indian typewhite glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. |
| 40 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 41 | P & F water closet Seat Covers with brass hinges complete : |
| 42 | P & F Low level Flushing Cistern of 10 litres capacity (IS :2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend and superior internal fittings as per IS : 7231 . |
| 43 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 44 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approvedmakewithC.I.bracketsdulypainted1No.15mm C.P.Pillarcock(IS:8934Mark)&32mmC.P.brasswaste coupling of approved make, P.V.C Waste pipe with PVC nut 32mmcompleteincludingcutting&makinggoodthewall :Size 550 mm x 400 mm dia |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. |
| 46 | 15 mm nominal size |
| 47 | 25mm nominal size |
| 48 | P &FFull-wayValve(IS:778Mark) orwheel valveof approved make : Gun-metal25mm nominal bore. |
| 49 | Making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and onecoat of neat cement, rounding edges and making and finishing the out let complete. |
| 50 | P&FrigidPVCPipe(IS:4985mark)classII/(4Kg./Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110mtr |
| 51 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality |
| 52 | 110 mm dia |
| 53 | 75 mm dia |
| 54 | Coupler |
| 55 | a) 75mm dia |
| 56 | b) 110mm dia |
| 57 | Bend 87.5 Dg. |
| 58 | a) 75mm dia |
| 59 | b) 110mm dia |
| 60 | Door Bend 87.5 Dg. |
| 61 | a) 75mm dia |
| 62 | b) 110mm dia |
| 63 | Pipe Clip |
| 64 | a) 110mm dia |
| 65 | Single Tee with Door |
| 66 | a) 75mm dia |
| 67 | Nahni Trap without Jali 4”110mm dia |
| 68 | Vent Cowl |
| 69 | 75mm dia |
| 70 | Gully traP |
| 71 | 110mm dia |
| 72 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 73 | Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore, 175 mm long |
| 74 | P&FInletConnection(AngleValves)Superiorquality,of approved make, for Wash basin, Gyser etc. C.P. Inlet connection15mm.Brass(IS:8931marked)with37cmlong pipe and nut. |
| 75 | P&FStopCock (IS:8931Mark), superiorquality&of approved make:Brass 400 gm. 25mm nominal bore. |
| 76 | P&FExtensionPipeforbibcocksofapproved quality/make.C.P. brass of Heavy & Superior quality 50x15mm |
| 77 | Providing & fixing C.P.flange for 15mm dia taps. |
| 78 | P & F Square-mouth gullytrap `A`grade (IS 651-1992 :marked)of approvedmake complete withC.I.grating,frame &CovermasonarychamberinC.M.1:6,100mmthickC.C. 1:5:10baseconcrete,40mmthickC.C.M-15gradecoping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 79 | Construction of manholein all type of soil inner size 90 X 60 Cm.300 mm thick masonry in CM 1:6,10 Cm.thick cement concrete1:5:10infoundation,20mmthickinsideplasterin CM 1:6, finished with floating neat cement, 50mm thick M-15 gradeC.C.flooring,makingchannels,80mmthickstone slab covering with40mm thickM-15grade C.C.flooring,Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 80 | Construction of chamberin all type of soil with 300 mm thick masonry in CM1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mmthickinsiderplasterinCm1:6,finishedwithfloating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Insidesize450X450mmdepthupto0.5M Cementcover with frame. |
| 81 | Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. |
| 82 | -do- size 450 x 450mm depth upto0.5 M Cement cover with frame |
| 83 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 gradeC.C floor &RCC slab covering with M15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users)with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. |
| 84 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth . |
| 85 | Providingandfixing aluminumwork fordoors,windows, ventilators and partition with extruded built up standard tubular / appropriateZsectionsandothersectionsofapprovedmake conforming to IS :733 and IS :1285,fixed with rawl plugs and screwsorwithfixingclips,orwithexpansionholdfasteners includingnecessaryfillingupofgap.atjunctions,attop,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered andjointedmechanicallywhereverrequiredincludingcleat angleAluminiumsnapbeadingforglazing/paneling,C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldropetc.,allcomplete asperarchitectural drawingsand the directionsofEngineer-in–charge.(Glazingandpanelingto be paid for separately). Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 86 | For shutters builtup standard tubular sections of openable doors,windows&ventilatorsincluding providing& fixinghinges/ rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). |
| 87 | Providingandfixing12mmthickprelaminatedthreelayer medium density (exterior grade ) particle board Grade I, Type IIconformingtoIS:12823bondedformaldehydesynthetic resin ,of approved brand and manufacture in paneling fixed in aluminiumdoors,windowsshuttersandpartitionframeswith C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre- laminatedparticleboardwithdecorativelaminationonone sideandbalancinglaminationonotherside. |
| 88 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick |
AI Tender Summary
Tender Timeline
Mar 01, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender