Tender For Periodical Renewal On Tipri Samun Dainkwan Road
Tender Value
23.99 Lakhs
Estimated cost
Bid Submission
06 Mar 2025
0 days left
EMD
43500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
indora → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Renewal On Tipri Samun Dainkwan Road Providing And Laying 25Mm Thick Bituminous Concrete In Km 2.00 To 4.00
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with smooth wheel 80-100(eighty-hundred) K.N. staticRoad roller in stages to proper grade andcamber, applying and bromming, crushable screening at the rate of 0.22 cum ( zero point two twocubic meters) per ten square meters,to fill up the interstices of coarse aggregate, watering andcompacting to the requireddensity grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 by Mechnical Meansincludingof material in all leads, lifts as per the entire satisfaction and direction ofEngineer – in- Charge including carriage of materials within all leads and liftsand other incidental . The rate isincludingoctroi,royality, Malkana, toll tax, sale tax, GST orother taxesimposed by the Government. |
| 2 | Providing and applying tack coat with bitumen emulsion after and including cleaning the road surface withhydraulic/mechanical brooms and spraying with emulsion pressure distributor at the rate 0.70 to 1.00 kg (zero point seven zero to one point zero kilogram) per square meter on the prepared Bituminous surface complete as per MORD Technical specification clause 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government. |
| 3 | Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface withhydraulic/mechanical brooms and spraying with emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilogram) per square meter on the prepared Bituminous surface complete as per MORD Technical specification clause 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government. |
| 4 | Providing and laying 25mm (Twenty five millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity Grade-thirty) @ 5.50% (five decimal five zero percent)/ Job mix formula of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 and as per directions andentire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals.The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government. |
| 5 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per Technical Specification Clause 504. and as per directions andentire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals.The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government. |
| 6 | Providing and laying of hot applied thermoplastic compound 2.5mm (two decimal five millimeter) thick and 0.10 (zero decimal one zero) meter wide strip in centre line and 0.30 (zero decimal three zero) meter wide strip in zebra crossing including reflectorising glass beads @ 250 gms (two hundred fifty grammes) per square meter area, thickness of 2.5mm (two decimal five millimeter) is exclusive of surface applied glass beads as per IRC: 35 (thirty five) in accordance with ministry of road transport specifications (Latest revision) and IRC code the finished surface to be level, uniform and free from strasks and holes including carriage of all labours, equipments and materials to various location through all modes of tranpottation in all leads , lifts and all incidental charges.The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Mar 01, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 06, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender