|
| 1 | Excavation in trenches, getting out in hard/dense soil not exceeding 1.5m deep and not exc 1.5m wide for taking out the existing cable .GI pipes etc. any size at places complete all as specified and directed. |
| 2 | Removing of surplus soil to a distance not exceeding 50 mtr complete all as specified and deposited where directed at a level not exceeding 1.5m above the starting point all as specified. |
| 3 | Returning filing in including spreading levelling, watering & well ramming in layers not exceeding 25 Cm thick all as specified. |
| 4 | Taking up/down GI/DI and connection from trenches incl connected fittings/accessories complete of following sizes for re use of serviceable pipes and removing the U/S pipes from site for taking credit |
| 5 | (a) 50mm bore |
| 6 | (b)40mm bore |
| 7 | (c)25mm dia |
| 8 | Supply, laying & testing in trenches GI pipe medium grade ISI markedwith all fittings complete all as specified for following sizes. |
| 9 | (a)--do-- 50mm bore |
| 10 | (b)--do-- but 40mm dia |
| 11 | (c)--do-- but 25mm dia |
| 12 | Taking down old/unservicable gate valve and float valve of different sizes complet all as specified and as directed |
| 13 | Supply & fixingin replacement of PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for brick masonry valve pit nominal size 60 cm x 60 cm x 60 cm with one brick thick wall using precast cement block of size 20cmx10cmx10cm brick in cement mortar 1:6 over 20 cm thick PCC plate form with 15 cm off set on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 and 50- mm thick RCC cover (in two equal parts 1:2:4) type B-1 with 10 mm dia deformed bars at 10 cm interval on both side including necessary form work with 150 mm dia hole in the center complete all as specified and as directed by Engineer-in-Charged |
| 15 | Supply and fixing in repair of gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 40 mm bre complete all as specified and directed by Engineer-in-Charge. |
| 16 | Description all as per item 9 here in before but 25mm bore |
| 17 | Description all as per item 9 here in before but 50 mm bore |
| 18 | M&L fortaking up submersible pump for complete rewinding, servicing and refixing of 415 volts 50 Hz 5 HP submersible motor and refixing/lowering down at existing same place and testing incl required accesssories i.e. nuts bolts, washers etc complete all as specified and as directed. Note:- item rate includes transporation of motor from site to workshop and back. |
| 19 | M&L for lifting of submersible pump motor set of any description and capacity including dismantling MS column pipe, steel wire rope from the bore well upto a depth of 90 mtr and Re-installations the samepump and motor set in the bore well in the same position alongwith all necessary work like fixing of column pipe, connections of rope with U clamps, connection to the discharge line, dry revolution test etc complete all as specified and directed. |
| 20 | Supply and fix in replacement including taking down of submersible flat .black pvc cable of size 6 sqmm,3 core un-sheathed copper conductor as per IS 694.complete all as specified and directed |
| 21 | Supply and laying in repair of synthatic rubber insulated mats 3 mm thick for electrical purpose as per IS 15652. suitable for electrical shock saftey of size 2mx1m complete all as specified,Capacity-Three phase 420 Volts. |
| 22 | S&F in repairstar -delta Starter for capacity 5 HP sumbersible pump of , 415 volts, 50 HZ 3 Phase incl the necessary wiring connection to the pump complete all as specified and directed. |
| 23 | S&F in repairDOLStarter for capacity 3HP sumbersible pump of , 415 volts, 50 HZ 3 Phase incl the necessary wiring connection to the pump complete all as specified and directed. |
| 24 | S&F in repair3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) of 20mm bore UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ wall/ floor complete all asspd and directed.Note :- All connceted fittings like elbow,tee,reducer coupler will be count in RM |
| 25 | All as per item No. 18 above but size of pipe 25 mm bore complete all as spd and directed.Note :- All connceted fittings like elbow,tee,reducer coupler will be count in RM |
| 26 | All as per item No. 18 above but size of pipe 32 mm bore complete all as spd and directed.Note :- All connceted fittings like elbow,tee,reducer coupler will be count in RM |
| 27 | S& F in repair 3 layer PPR gate valve 20mm complete all as spd and directed. |
| 28 | All as per description of ser item No.21 here -in-before but 25 mm dia |
| 29 | All as per description of ser item No.21 here -in-before but 32 mm dia |
| 30 | Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint of size 16 to 40 mm etc. |
| 31 | Supply and fix heating element of capacity 2 KW withcapillary thermostat 7\" adjustableupto 70 degree celcius cut-off,20A/220 volts for the sintex water tank incl plumbing wkscomplete all as spd. |
| 32 | Supply and fixing heat tracing cable ( self regulating) 14 AWG nickel plated copper bus conductor for PPR piperated ouput wattage at -10 to 5 degree 30 w/m at220 V complete all as spd. |
| 33 | Supply and fixing heat tracing cable ( self regulating) 14 AWG nickel plated copper bus conductor for GIpiperated ouput wattage at -10 to 5 degree 30 w/m at220 V complete all as spd. |
| 34 | Supply and fixing in replacement of damaged nitrileinsulation 19mm thick over PPR/GI pipes of 20mm bore size complete all as specified and directed. |
| 35 | All as per description of ser item No.28 here -in-before but for 25/32 mm dia |
| 36 | S&F in replace autocut controller for tracer/antifreezing cable complete with all electrical connection, 230V, 50 Hz all as specified and directed. |
| 37 | Supply and laying in replacement ofHDPE(High density Polyethylene) flexible pipe size 32/40 MM ( Coil Form) completewith accessories such as socket, tee, bend, nippleetc forleakproof jointfix on wall /floor/ surface all as directed by Engr-in-charge . |
| 38 | Supply and fix 4sqmm 2 core copper PVC insulated un-sheathed fexible cable comleted all as spd. |
| 39 | Supply and fix junction box of size 195x140x65 mm (IP 66) water tight for termination of power cable and tracer wire 15-20A/220V compete all as spd.Make - Sintex Model No. GSJB -1510 |
| 40 | S&F distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. |
| 41 | S&F 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 42 | S & F of SPN 32Amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 43 | Repair/Replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised iron srip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 44 | Taking down old un-serviceable panel of any type and size,M&L for Fabrication, testing and commissioning of factory made LT double door type panel board as per CPRI design made of CRCA sheet of 3.15 mm thick, outdoor type totally enclosed with front opening hinged doors with canopy sloped top projected and plinth mounted , weather and water proof as per IS-8623 copperbus bar with phase and neutral, insulators suitable for 3 phase 4 wire LT AC, 50HZ, 433 volts, 200A amps, capacity complete with necessary locking arrangement and bus bar insulated with PVC sleeves in colour RYBN with bus bar tapings for MCCB\"s, copper control wiring of required size for instruments and mounted on MS channel of suitable size over PCC pillar duly finished with cement paster including fixing accessories, earth work and excavation and duly powder coated on out side and inside including provision of the following :- |
| 45 | (a) MCCB 125 Amps, fixed thermal magnetic release type,25KA,AC 50 Hz, 4 pole - 01 No (Incoming) |
| 46 | (b) MCCB 63 Amps, fixed thermal magnetic release type,25KA,AC 50 Hz, 4 pole - 02No (outgoing) |
| 47 | (c) MCCB 40 Amps, fixed thermal magnetic release type,25KA,AC 50 Hz, 4 pole - 01 No (Outgoing) |
| 48 | (d) MCB SPN 32 Amps, 230 V, 10 KA breaking capacity C series2 pole - 01 No (Outgoing) |
| 49 | (e)Indication lamp (R,Y,B),LED type, with toggle switches ( Set of 3) - 1 set . |
| 50 | (f) Ammeter , 3 Phase ,Digital Type ,200 Amp with Suitable CTs Complete |
| 51 | (g)Voltmeter , 3 phase ,Digital type ,Suitable for range (0-500) Volts with Selector Switch |
| 52 | (h) change over 125Amps -01 Nos |
| 53 | Deduct Credit for Demolished/Dismantled material Rs (-) 65989.00 (Minus) as listed in Schedule \"A\" Sec-II (Credit Schedule)Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the \"Contract Sum\". |