Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-03-2025 | Date Extension | Date | 24-03-2025 |
| 2 | 13-03-2025 | Prebid Queries Clarrification Additional | Other | 17-03-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 2 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 3 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 4 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. |
| 5 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. |
| 6 | Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc, complete |
| 7 | Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. |
| 8 | Extraction and disposing the debris outside the site premises transportation upto 10 Km |
| 9 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 10 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 11 | Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Manual Means |
| 12 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling withavailable earth/murum, ramming ,watering including shoring andstrutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means |
| 13 | Filling in plinth and floorswith approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. |
| 14 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 15 | Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 19 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 20 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/ quartzite/ gneiss metal for R.C.C.beams andlintels asper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 21 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 22 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/ pumping , compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 24 | Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 25 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 26 | Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth |
| 27 | Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -16 mm dia 320mm depth |
| 28 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 29 | Providing Autoclaved Aerated Concrete Block masonary of conforming to IS: 2185 (Part3) - 1984 in extra fine jointing mortar of fixoblock of UltraTechor equivalent in superstructure including striking joints, raking out joints and scaffolding etc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) |
| 30 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 31 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) |
| 32 | Drilling with core cutting machine in RCC slabs, walls etc.wherever required in buildings, manholes, ducts, water tanks, pits etc. for laying pipes,sleeves and making good the same to give an even finish. The rate shall include the cost of drilling core, providing EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever required,scaffolding and labour charges for working at all levels ,leads and heights. (Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge. e) Above 100mm to 150mm dia |
| 33 | Providing and laying Siporex-bat coba system, comprising of 25mm thick Cement Mortar 1:3 base coat, siporex-bat coba filling and 25mm thick, Cement Mortar 1:4 top-finish coat. The mortar for the siporex-bat coba filling shall be Cement Mortar 1:4 and admixed with integral waterproofing compound and mortar plasticizer, all as permanufacturer\"s specifications curing, complete. The top-finish coat shall be broom-finished suitable for laying tiles. The cost should include sealing the annular space between the pipe and the masonry as per manufacturer\"s specifications, making khurras of required diameters in MS, river sand screened and washed, at all leads, lifts, heights, scaffolding, with proper slope to drain-off water entirely, complete, etc. Curing shall be done for 7 days by ponding with water. The FRP (Fiber-Reinforced Plastics, or Fiber-Reinforced Polymers) lining and coating is used extensively in industries for various purposes. FRP has several properties that make it suitable for the adverse and hostile conditions of an industrial environment such as non corrosive, weather proof, fire retardant and impact resistant. |
| 34 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 35 | Supply & installation of designer Security Cabin made out of marine grade composites (marine grade corrosion resistant & Hydrocarbon solvent resistant). The Inner Column Frame made of 76 mm OD mild steel pipe as per IS: 1161 or IS: 1239 hot dip galvanized 65 microns, postfabrication. The gap between galvanized pipe & the FRP Security cabin shall be supported with proper frame work for better stability. The HDGPipes & cladded with glass reinforced polymer using Unsaturated Polyester resin along with 300 & 450 GSm Emulsion Chopped Strand mat comprising Viscosity @ 25°C should be 300 to 400 cps with Acid Value of 25 mg KOH/g. Volatile Content of 35%. Specific Gravity 1.12 @25°C.Barcol Hardness of 30-35, heat deflection temperature of 60-63°C weather ability, heat resistance, chemical resistance, and electrical properties. The Glass Fibres complies with DIN EN-2.2 & DIN EN 10204-3.1. The camouflaged FRP grooved sheets side wall of the cabin. The top roof of the security shall be designed to have proper rain protection during the rainy season and shall be assembled at site with the help of modular bracket with suitable SS hardware. PU paint treatment for a classic surface finish. All hardware is of stainless steel. The product is an all Weather proof & maintenance free. It\"s self-coloured textured surface finish with scratch resistant, aliphatic grade UV. Stabilized PU paint with UV stablePolyurethane 120 S+/-5 viscosity aliphatic paint, with minimum standing life of 5 years. These security cabin shall be individually hand crafted to replicate steel and cast iron. All hardware is in SS. The security cabin shall be supply with normal power socket light tube for lighting. The size of the security cabin shall not be less than L1200mm X w12000 X H2400 (+-50mm) |
| 36 | Waterproofing Treatment to new terrace by using Polymeric Cementitious Membraneas approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall bepaid separately). Clean the entire surface thoroughly and over this prepared surface, applythree coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of parapet and work up to a height of 300 mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30 cm x 30 cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:(1) Elongation % (ASTM D412-2016): @ 100%(2) Tensile Strength N/mm2 (ASTM D412-2016): 3.3 (3) Specific Gravity: 1.02 ± 0.02(4) Total Solids (ASTM D1644-2012): 43.98 (5) Hardness Shore A (ASTM D2240-2015): 82 |
| 37 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. complete. |
| 38 | Providing and Suppying Waterguard PU Membrane Primer - Surface must be structurally sound, clean dry and free from dust, grease, curing compounds, paint coatings, and other loose debris. apply and supply of Waterguard PU Membrane Primer at 5-6 m²/kg. Allow to cure for at least 4 - 5 hours prior to over coating with 2) Waterguard PU Membrane Supply & application of 1mm thick Liquid applied, single component, seamless, polyurethane elastomeric, waterproofing membrane shall be pure polyurethane based elastomeric coating . It shall be having properties like elongation 400-600% ,tensile strength >2.0 N/mm², crack bridging capactity > 1.5 mm. It will give coverage of 1.2 kg/m² for 1000 microns DFT after through surface preparation, grouting wherever required, coving between the wall-slab junction using polymer modified mortar etc. Sand sprinkling should be done while the 2nd coat of Waterguard PU Membrane is still wet for better bonding of protective screed. 3) WATERGUARD GRS Providing & laying of protective Glass reinforced sheet -WATERGUARD GRS 250GSM over the entire membrane after the immediate application of the 1st coat of Waterguard PU Membrane. After curing for 24 hours application of 2nd coat of Watergurad PU Membrane on it at the right angle of the 1st coat. 4) Waterguad WM (F) Supplying and applying slope making and protection to the waterproofing treatment with ready-to-use, fiber reinforced cementitious waterproof screedwhich shall have compressive strength of 40 N/mm² , Flexural strength > 5.0 N/ mm² , applied it with trowel at the thickness of 10 mm as per desired slope. 5) Flowgrout 60 (for coving) Coving (vata) between the wall-slab junction using high strength, nonshrink cementitious grout.FLOWGROUT 60 is mixed with sand (1:1) ratio and requiring addition of precise quantity of water at site and applied at the height of 3 inch. As Directed by Engineer Incharge |
| 39 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 40 | Providing and applying plaster/wall punning with plaster of paris (with plaster ofparis material)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster)in all position including preparing and Finishing the surface scaffolding etc.complete. |
| 41 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 42 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete |
| 43 | Providingand laying cement concrete flooring 40 mm thick with M15 cement concrete laidtoproperlevelandslopeinalternatebaysincludingcompaction,fillingjoints, marking lines to givetheappearanceoftiles of 30cm x 30cm or other size laid diagonally/squareetc finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade |
| 44 | Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary) |
| 45 | Providing and laying vitrified mirror / gloss finish tiles having size 590mm By 605 mm x 590mm By 605 mm of 8 to 10mm thickness and confirming to IS.15622 2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 46 | Providing and laying vitrified gloss finish tiles having size 1200mm By 600mm of 8 to 10mm thickness and confirming IS.15622 2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 47 | Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for Flooring/dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete |
| 48 | Providing and laying vitrified matt finish tiles having size 1200mm By 1800mm of 8 to 10mm thickness and confirming IS.15622 2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 49 | Providing and laying vitrified matt finish tiles having size 2400mm By 1200mm of 8 to 10mm thickness and confirming IS.15622 2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 50 | Providing and installing Porcelain Slim Tile, measuring 2400mm by 1200mm with a thickness of 8 to 10mm, as per IS 15622:2006 (Group Bla). The sheets, of an approved make, shade, and pattern, will be used for dado and skirting in the required positions. They will be fixed using a 1:4 cement mortar, with a neat cement float for a smooth finish. The installation process includes filling the joints, curing, and cleaning the surfaces, ensuring completion as per the directions of the Engineer In Charge. |
| 51 | Providing and laying 2mm thick antifungal self levelling Epoxy flooring on concrete substrate including coving at floor wall junction & including necessary surface preparation using cleaning, dedusting, applying suitable primer including Aisle or zone marking in different colours etc. complete as per manufacturers specifications and as directed by Engineer In Charge. |
| 52 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded Nos.ing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 53 | Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete |
| 54 | Providing and fixing 2mm thick Antistatic Vinyl flooring of approved brand, pattern, shade fixed with approved adhesive as per manufacturer\"s specifications including floor base preparation using epoxy mortar if required. The flooring shall be in roll form etc complete as directed by Engineer In Charge. |
| 55 | Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete. |
| 56 | Providing and laying at site 8mm thick laminated flooring having an inbuilt 1mm soundbloc CS backing - class of use 33/23, wear resistance AC-5, impact resistance - IC 3, (as per EN 13329), top surface having a MLC (Multi Layer Composite) high pressure laminate, top surface treated with (Aluminium Oxide) surface guard (tm) plus on top of high density fibreboard substrate (density 910 kg/m3) specially developed core; of plank size 1994mm x 194mm having smart lock tounge and groove joints to secure long lasting joint. The edge of tounge and groove of planks duly impregneted with paraffin. The approved decor planks to be placed on underly - 0.2mm thick alkali resistant polythylene sheet (Density 935 Kg/m3) to resist any moisture movement from the sub floor and secure floating floor installation. Pergo original conforms to EN 13329, ASTM C 1028, DIN 52185, DIN 54345, EN 717-2, DIN 4102.oring |
| 57 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. |
| 58 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 59 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. |
| 60 | Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. |
| 61 | Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete |
| 62 | METAL BAFFLE CEILING : Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Wood grain/ Plain finish (RedOak,Cherry,Black&White)..The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron.The powder coating shall pass Salt Spray Test for 750 Hours as per ASTMB117,QUV–A Test for 1000 hours as per ASTMG-154–(Cycle–1) and Humidity test for 1000 hours as per DIN50017. The powder coating shall have an adhesion of GT0 as per ENISO2409.The shade variation within a manufacturing batch shall be deltaE<1using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20x30x3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffle satanon-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with Endcaps..SUSPENSION:Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U–profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plug in clip to secure the hanger in perfect position and achieve uniform spacing between baffles.The overall dimension of the U–profile is 20(W)x30(H)x3750(L)mm an disrolled form from 1.5 mm thick mild steel with a powder coating thickness of 60-80 micron.U-Profile to be connected to each other using U–ProfileSplice.TheU-profile shall be hanged from the true ceiling using threaded rod using a U-Profile hanger.The Baffle along with suspension system used together shall carry a 10year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate. |
| 63 | Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 and 7), in module size of 600x600 x 16mm suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I. channel on XL2 Clip having a web height of 32 mm 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and pull out strength of 100Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete |
| 64 | ACOUSTICAL GLASS FIBRE FALSE CEILING CLOUDS & SHAPES : Providing and Fixing Acoustical Clouds/Shapes-Acoustical clouds which are 30mm thick, flat glass fibre panels of Humidity Resistance RH 95%, with embedded frame made of aluminium extruded section of 38 X 10mm of grade 6063 - T6 as per dimension mentioned in below table for reinforcement and secured hanging. Embedded extrusion shall have grub slot with pre inserted nut for group hanging and connected using Aluminium die casted corner connector with ¼” – 20 threading for hanging using cable adjuster for independent clouds.The form of Acoustical Clouds/Shapes - shall be Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) in standard Traffic White color with light reflectance 90% as per ASTM1477 - 98 or in the color specified by the Architect / Engineer incharge (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon). The Acoustical Clouds / Shapes shall be made of Glass fibre panel with density of 110 - 120 Kgs/m3 along with acoustical sound absorbings crim on the face to achieve sound absorption as per below mentioned table in accordance to ENISO 354:2003 (average of 500 - 4000Hz). The face and edges shall be finished with matching water based texture paint. Shape Nominal Size and Sound Absorption – Metric Sabin 1. Square 1170 x 1170 mm - 2.48 Metric Sabin 2. Convex 1170 x 1140mm 2. 28 Metric Sabin 3. Concave 1170 x 1140mm 1.94 Metric Sabin 4. Circle 1170 Dia. 2.12 Metric Sabin 5. Hexagon 1170 x 1010 mm 1.61 Metric Sabin 6. Trapezoid 1170 x 1170mm 2. 15 Metric Sabin 7. Left Parallelogram 1170 x 1170 mm 2.15 Metric Sabin 8. Right Parallelogram 1170 x 1170 mm 2.15 Metric Sabin. The panel shall be hung as per the following based on the installation. Individual Suspension - The panel shall be hung using deck hanging kit comprising of griper structure anchor & cap of dia. 20mm, spring loaded bottom end cable adjuster of dia. 9 mm and 2.4m long air craft cable of 1/16” dia. The One Number of deckhanger will be as per Table 1 above. |
| 65 | METAL OPEN CELL CEILING : Providing & fixing horizontal level Open cell Aluminium lay-in ceiling tiles with border panels forming board edge of size 600x600x38mm (Nominal) having cell size of 100x100 mm made of AA-3003-H14 (Tempered) grade Aluminium suitable for architectural finishes in 0.35 mm thickness as per in IS:2676 (1981) in Global white color. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. Tile shall have a Fire Performance class A as per GB 8624-2012. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile colour) having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked polyester paint of 0T bending capability., The Tile & Grid system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit usingsuspension system (specifications below) at 1200mm maximum. The First/Lastsuspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to bewall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. All border cut tiles shall be laid, usinglay-in end cap for installation to have a Microlook effect on perimeters. Installation shall be carried out as per Manufacturer recommended procedure. SUSPENSION SYSTEM accessories manufactured and supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. |
| 66 | Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 and 7), in module size of 600x600 x 16mm with Anti Microbial coating on the face of the tile, suitable for Green Building application, with Recycled content of 34%. The tile shall be laid on precoated G.I. channel on XL2 Clip having a web height of 32 mm 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and pull out strength of 100Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete |
| 67 | Providing and fixing 75mm thick Cement Board partition panels up to a height of 4.5 meters, using GI floor and ceiling tracks of 78mm size with 0.9mm thickness. The tracks will be securely fixed to the floor and RCC soffit/steel structure frame, ensuring proper alignment with metal anchor fasteners or hex head screws. The Cement Board panels, with an apparent density of 700-800 kg/cum, thermal conductivity of 0.12 K.cal/h.m°C, fire rating of 134 minutes (BS 476 Part 20-22), and sound transmission class of 40dB (IS 9901 Part-3), will be installed vertically into the tracks. Panels will be 600mm wide and available in heights of 2400mm, 2700mm, or 3000mm, with joints above 3m staggered for a minimum 1.5m overlap. Tongue and groove joints, including horizontal ones, will be sealed with a mixture of sodium silicate and fly ash for permanent rigidity, and finished withjointing compound and fibre mesh tape. For fire-rated walls, peripheral joints will be sealed with fire-cum acoustic sealant and backed with a backer rod, ensuring completion as per the directions of the Engineer In Charge. |
| 68 | Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 69 | Full Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. PrelaminatedPartical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 70 | Providingand fixing aluminum partitions with 40mm/52mm framing systems, including top-hung windows, necessary hardware (handles, hinges), 10mm clear toughened glass, EPDM gaskets, and accessories (silver anodized)as per design and drawing as directed by Engineer-In-Charge etc complete. |
| 71 | Providing & Fixing in position, Partition made from 12mm thick Gypsum from both sides on 50x50mm Sal-wood frame of 600x600ctoc, having of 800 gsm synthetic wool 50mm thick in between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspectsincludingallmaterials labour,finishing etc complete |
| 72 | Providing and fixing mirror panelling on walls as per the approved design and shape. The installation will include a 50mm x 50mm x 12-gauge thick aluminium pipe framework at 450mm c/c, both ways, well notched and screwed, with a 6mm thick marine plywood backing to hold the 6mm thick approved mirror panels. The process also includes applying wooden beadings, necessary wooden packing to achieve the required profile, and protective coating on the mirror back. The mirrors will be fixed using 3M tape and silicon sealant, with machine-edge polishing. Scaffolding, cleaning, and all necessary labour, materials, tools, plant, transportation, and incidental charges are included. The work must be completed at all specified floors and heights, as directed by the Architect/Engineer In Charge (EIC). The rate covers all cutting, finishing, wastage, and miscellaneous consumables, and the contractor will be responsible for any damage to existing services. Measurement will be based on the actual finished area in the vertical plane/elevation as specified, ensuring completion as per the directions of the Engineer In Charge. |
| 73 | Providing & constructing Soft board panelling with soft board & fabric. |
| 74 | Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, InteriorWhite, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mm of visible pane (G-13/ G-21). The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. |
| 75 | Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A , as per ASTME-84. The Acoustical Wall Panel shall be of sizes 600 x 600 mm (Nominal) or 600 x 1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250Hz , 500Hz , 1000Hz and 2000Hz ) with 50mm air gap as per ASTMC 423to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have are cycle content of 85%. Installation: An appropriate vapour barrier (by others) shall be applied / installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50 x 50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface.The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600 x 600mm and 4nos.in case of 600 x 1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained |
| 76 | Providing and fixing 3.5 to 4mm thick Veneer finish wall Panelling made out of 50 x 25 mm (finished size) C.C.T.W. framework or size of 600x600mm center or as per site condition covered by 6mm thick marine plywood of the generally confirming to I:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wall nut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc. to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. |
| 77 | Providing and fixing 6mm thick back-painted glass of approved shade and make, securely fixed using recommended adhesive of approved make. The glass paneling shall be installed over an 18mm thick plywood base, which is fixed onto a wooden framework made of 50x50mm thick seasoned wood sections placed at 600mm center-to-center. The rate for ply paneling includes an additional 15% to cover labor, installation, and finishing costs. The work shall be executed as per the design, specifications, and directions of the Engineer-In-Charge, ensuring proper alignment, leveling, and finishing etc complete |
| 78 | Providing and fixing wall paper / Graphic for highlighting the walls with proper adhesive in line level for reception, conference & Auditorium rooms and wherever required as per the drawings. Basic rate of Wall paper is Rs..100/- per Sft. Make - D\"decor / Nilaya By Asian Paints or equivalent. |
| 79 | Providing &Fixing frosted film manufactured by 3 M approved equivalent on glass partition wherever required as per the instruction of Architect. |
| 80 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. Both side polish |
| 81 | Providing & Fixing in position, 12mm wp Plywood & 1.5 mm laminate panels above the fabricated frame on one side, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete |
| 82 | Providing and fixing Country cut teak wood single leaf door shutter with teak wood style and rail of 25 mm thick including fixing 50 mm x 25 mm size welded mesh of 10 gauge as per detailed drawing or as directed with stainless steel fixture and fastening finishing with oil painting 3 coats complete |
| 83 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panelswithoutventilatorasperdetaileddrawingexcludingthedoorframe,stainlesssteel fixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 84 | Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 85 | Providing and Fixing 30 MM thick both side prelaminated solid oanel PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 Nos. ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 Nos. M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares |
| 86 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Nos.ing / moulding the sharp edges wherever necessary, curing, etc. complete. |
| 87 | Providing and fixing glazing panels & doors using 12mm thktoughen clear glass (confirming to ASTM Standards C-1048) supported byc-channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge,stainless steel articulated countersunk bolts threaded bolts,chemical fasterners,etc., glass panel size as per design and drawing including applying colourless sealant of joint incl. required edge polish, making glazing water tight etc. Destructive node joint test reports to be submitted forestablishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etc., complete as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top. Hardware-Droma BTS 80 Floor Spring. |
| 88 | 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2hr frl (120/120) 3 Criteria - Integrity / Insulation/ Stability Wooden Door - Fire Door Tested in accordance to IS: 3614Part2. with prior approval ofconcerned Superintending Engineer. b)Shutter: Providing of 57mm thick asbestos free composite, \"TUFWUD\" brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 mm with 30mm thick infill of ceramic fibre (density 128 Kilograms/CMT) vermiculite mix, 3mm thick Lead Sheet on one side faced & 3mm Fire retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping. |
| 89 | a)Door Frame: Providing Frames for Accoustic door shutters with double rabbit of 68mm 1st class Malaysian Hardwood Frame densified and pressure treated with chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Hafele Accoustic seals concealed in the groove of the Frame for noise control, etc. complete as per direction of Engineer in Charge |
| 90 | Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122 x 31.75 mm weighing 1.15Kilogramper One Running Metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6Kilogramper One Running Metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete (As Per Detail Drawing) |
| 91 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangularpipe having overalldimension63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/One Running Metre. Top and side track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Runningmetre. As per detailed drawings and asdirectedbyEngineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box |
| 92 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. |
| 93 | Providing and fixing M.S.grill door 24 Kilogram /One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 94 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete |
| 95 | Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. |
| 96 | Providing and applying decorative or texture paint of an approved make on internal gypsum or POP surfaces, following the manufacturer\"s instructions and as directed by the Architect. This includes surface preparation, applying one coat of water-based PVA primer (copolymer-based, alkali-resistant, with fungicide), followed by two coats of water-based acrylic putty, light sanding, and additional sanding for a smooth finish. The work also requires scaffolding, work platforms, painting equipment, and apparatus to achieve an interior-grade finish with three coats of the approved shade and color. The work will be completed to the satisfaction of the Project Manager (PM) and Engineer In Charge at all specified heights and levels. |
| 97 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete. |
| 98 | Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.) |
| 99 | Providing and applying two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications to smooth sand faced or other surfaces, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. |
| 100 | Providing andapplying priming coat over new/oldsteel andothermetal surfacesincluding preparingthesurfacebythoroughlycleaningoil,grease,dirtandotherforeignmatterand scouredwithwirebrushes,finesteelwool,scrappersandsandpaper,scaffoldingetc. complete. |
| 101 | Providingandapplyingprimingcoatonconcrete/masonary/AsbestosCementplastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 102 | Providing and supplying molded bar stool with a dual-tone PU leatherette seat, designed for durability and comfort. The stool shall have fixed stainless steel legs with an overall height of 42”, including a back support of height between 29” and 31”, ensuring ergonomic seating. The design includes an integrated footrest for additional comfort and stability. The stool shall be as per the approved design and finish and executed as directed by the Engineer-In-Charge etc complete. |
| 103 | Providing and supplying molded PVC stackable café chairs. The seat and backrest are made of injection-molded polypropylene and are securely attached to the frame using steel Pal-nuts and metal clips. The chair features a contoured handle at the top for easy lifting and stacking. It includes a 7-gauge steel seat strap for added strength and ribbing for support, along with 7/16\" contoured wooden legs for added durability. The frame is finished with a bright chrome-plated finish, complemented by duplex nickel and chrome layers for corrosion resistance. The work will be completed as per the specifications and image provided, and as directed by the Engineer In Charge |
| 104 | Providing and fixing a café table with dimensions of W1200 x D900 x H750mm. The worktop will be made of 25mm Prelam particle board of Grade II, Type-II (as per IS:12823), with a 0.6mm backing laminate. Exposed edges will be finished with 2mm thick PVC lipping, machine pressed. The legs will be made of powder-coated steel with a 50mm x 50mm section, complemented by a vase-shaped SS 380mm x 700mm structure and an 8mm SS plate. The cross members will be made of CRCA steel, while the beam will be made of 1.5mm thick MS, with a powder-coated finish of 50 microns. The furniture will meet the specifications and sample approved by the client, and the work will be completed as directed by the Engineer In Charge, as per the provided image. |
| 105 | Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three Nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. Theoverall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. Thehead board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. |
| 106 | Providing and fixing partitions made up of CCTW frame of size 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply and 4mm thick veneer/Laminate with French polish etc. complete (Bed Back Panelling) |
| 107 | Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY (WITHOUT MOUSE TRAY) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle |
| 108 | Providing table top of required size 1200 Dia fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine Plywood (IS 710 : 2010) and FIRE RETARDENT laminate on all sides / surfaces. Sides with S.S.Round Under structure etc. complete. |
| 109 | Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40mm with 100 mm height with suitable finish to match handles’\" Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete. 900 x 450 x 1950 - 4 SHELVES |
| 110 | Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery |
| 111 | Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding |
| 112 | Providing and fixing an overhead storage unit above the study table with dimensions of 1500mm (L) x 450mm (D) x 600mm (H) as per the provided drawings. The unit will be constructed with top, sides, bottom, back, skirting, and all vertical and horizontal intermediates made from approved exterior-grade MDF. All external surfaces will be finished with a 1mm thick laminate of an approved make. The exposed edges will be finished with PVC edge binding. The work will be completed as per the specifications and image provided, and as directed by the Engineer In Charge |
| 113 | Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing |
| 114 | Providing and supplying a shoe rack with dimensions of 600mm (L) x 350mm (D) x 1200mm (H), constructed from high-grade European 18mm marine plywood for durability. The rack features a heavy-duty construction with 4 shelves, 2 slab-style doors, and 4 wooden legs for stability. It is designed for floor-mounted installation, ensuring sturdiness, while the tabletop mounting type adds versatility to its use. The shoe rack is built for long-lasting performance.The work will be completed as per the specifications and image provided, and as directed by the Engineer In Charge |
| 115 | Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. complete. 1 seater |
| 116 | Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. complete. 3 seater |
| 117 | Lifting, shifting, and re-installation of a walk-in cooler and walk-in freezer at a new location. The work shall involve dismantling, transportation, and reassembly, using brand-new materials and equipment to ensure durability, safety, and compliance with operational standards. Scope of Work: 1. General Requirements 1. Site Survey and Preparation • Conduct a detailed survey of the current and new installation sites. • Develop a plan to ensure safety and minimize downtime during the process 2. Workmanship • Tasks will be executed by skilled professionals experienced in refrigeration systems.• Compliance with local safety and technical standards is mandatory.2. Materials and Components All materials and components shall be of premium quality and brand new.a. Piping and Accessories High-quality copper piping for refrigeration. • Proper insulation to minimize thermal loss. • Leak-proof fittings and durable connections.b. Electrical Components • New wiring, conduits, and accessories for electrical systems. • Control panels with updated circuitry and clear labeling.• Energy-efficient components for optimized performance.c. Refrigeration Components• Compressors, condensers, and evaporators must be tested and confirmed in optimal condition • Replacement of refrigerant with eco-friendly options.d. Structural Components • High-density polyurethane foam (PUF) panels for walls and doors. • Insulated doors with durable gaskets and hinges.• Stainless steel (SS) racks for hygienic product storage.3. Machines and Equipment• Inspect and ensure the condition of refrigeration units before re-installation.• Replace any worn or damaged components to ensure seamless operation.4. Installation Process1. Dismantling • Carefully dismantle the existing system to avoid damage. • Transport all components safely to the new location.2. Lifting and Shifting Use suitable lifting equipment for heavy components. • Implement safety measures to prevent accidents or material damage.3. Re-installation • Reassemble the system using new materials at the new location. • Install PUF panels, insulated doors, and SS racks as per the layout plan. Connect refrigeration piping, electrical wiring, and control systems. 4. Testing and Commissioning• Conduct leak tests on refrigerant piping and connections.• Verify electrical connections and test control panels for functionality.• Run the cooler and freezer to confirm proper temperature control and performance.5. Quality Assurance • Inspect all components after installation to ensure compliance with operational, safety, and energy efficiency standards.6. Documentation • Provide comprehensive documentation, including details of materials used, test reports, operational guidelines, and maintenance schedules. |
| 118 | Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-chargeprior execution of work) |
| 119 | Providing and fixing mild steel grill work for windows, ventilators etc. 20Kilogram/One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 120 | Providing & fixing TRAP DOOR with T.W. frame work and shutter made from19mm marine plywood and exposed surface finished with 1.5mm laminateand internal surface finished with flat oil paint with s.s. fittings & fixtures of make (ozone, Hettich, Hafle)as per Architects detailed drg. and design. |
| 121 | Providing and fixing strips as specified below in joints of flooring as per the approved pattern, spacing including levelling, polishing, finishing etc. complete as directed by Engineer in charge. 3.15 mm thk., 35 mm wide aluminum strips |
| 122 | Providing and supplying trash bins with a maximum height of 450mm, made of high-quality molded plastic for durability and ease of maintenance. The bins shall be equipped with a functional lid mechanism and shall be provided as per the approved selection and design. The work shall be carried out as directed by the Engineer-In-Charge etc complete . |
| 123 | Providing & arranging Indoor Plants in pots of Size 6\". Height of Plant is 20cm to 30cm. Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. Considered Plants are Tradescantia |
| 124 | Providing & arranging Indoor Plants in pots of Size 6\". Height of Plant is 20cm to 30cm. Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. Considered Plants are Syngonium pink |
| 125 | Providing & arranging Indoor Plants in pots of Size 8\". Height of Plant is 30cm to 45cm. Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. Considered Plants is Croton Petra |
| 126 | Providing & arranging Indoor Plants in pots of Size 8\". Height of Plant is 30cm to 45cm. Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. Considered Plants is Dracena Green |
| 127 | Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. |
| 128 | Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 129 | Providing and arranging paintings and artwork with dimensions of 750mm x 1050mm, as directed by the Engineer In Charge. The selection of the paintings and artwork will be made by the Architect and the Department, based on the sample image provided |
| 130 | Providing and fixing a notice board of the required size, with an openable shutter on the front. The frame will be made from 19mm thick steam beech veneered block board, with an outer frame in a 2 1/2\" x 1 1/2\" steam beech wood section. The board will include concealed hinges, a locking arrangement, and a 5.5mm thick glass. The rear panel will feature a softboard core covered with fabric of an approved shade. The notice board will be fixed to a 6mm thick back ply and finished with melamine polish in a stain of the required shade. The work will be completed as per the approval of the Architect or employer and directed by the Engineer In Charge, following the sample image provided. The basic rate for the materials is Rs. 100/- per meter for 48\" width.by the Engineer-In-Charge etc complete . |
| 131 | Providing and laying a hot-applied thermoplastic road marking strip on a bituminous surface, in the specified shade or color, with a thickness of 2.5mm. This includes the application of 1.5 refractive index reflectorizing glass beads at a rate of 250g/sqm. The 2.5mm thickness is exclusive of the surface-applied glass beads. The marking must meet the requirements of IRC 35:2015, with an initial dry reflectivity (RL) of >250 mcd/sqm/lux measured within the first 7 days and a sustained reflectivity (RL) of 100 mcd/sqm/lux, as well as a Qd value of 100 mcd/sqm/lux, measured at the end of 2 years using a standard reflectometer (Zehntner, Easylux, Delta). The finished surface should be level, uniform, and free from streaks or holes, completed as directed by the Engineer In Charge and in accordance with MORTH Clause 803 and IRC 35:2015. |
| 132 | Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teak wood planks 100 x 800 having tongue & groveon Sal wood frame of 50x100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items/polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects..including all materials labour, finishing etc complete |
| 133 | Providing and fixing stainless steel sink of size 600 x 510 x 200mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 134 | Providing and fixing vinyl clear printed graphic film using film adhesive. The vendor is required to include wastage in the quotation. A 3-year warranty, in accordance with the manufacturer\"s guidelines, must be provided. The cost will also include the graphics design. The installation will be carried out as directed by the Engineer In Charge. |
| 135 | Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 136 | Providing and laying 50mm thick plain cement concrete (PCC) with a mix ratio of 1:4:8 (1 part cement, 2 parts coarse sand, and 4 parts graded stone aggregate) above MODIFOAM blocks, which are laid on a concrete floor and held in position by welded mesh. The work includes compacting, curing, necessary shuttering and its removal, dewatering if required, surface cleaning, preparing junctions, and ensuring the work is completed at all specified depths and leads, as per the drawings. All tasks will be completed as directed by the Engineer In Charge |
| 137 | Providing and Fixing Accessible Wayfinding and navigation signage systems - Providing and fixing in location as diected by Engineer in Charge, accessible modular wayfinding and navigational signage system comprising of ADA and Harmonised Guidelines compliant sigange and wayfinding elements, in multilingual, tactile and braille format. Sigange systems to be designed for entire building / complex under consideration |
| 138 | Fire exit Signages - Fire exit and floor identification signage as per manufacturer\"s specifications, ADA compliant and modular system |
| 139 | Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) signboards of size 6\"x 9\" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate.Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL and as per the directions by the engineer in charge. |
| 140 | Providing and fixing an MDF louvered panel with an approved design and shape. The panel will be framed with a 50mm x 50mm x 12 gauge aluminium framework, spaced at 450mm center-to-center both ways, as per the provided drawing. The framework will be notched and screwed securely. The panel will have a 12mm thick commercial plywood backing, which will support a 3mm thick MDF panel. The MDF will be finished in duco paint and will be sized at 8\" x 4\", as directed by the Engineer In-charge |
| 141 | Providing and installing a Dumb Waiter with a 100 kg load capacity and a speed of 0.25 meters per second, operating between the 1st and ground floors. The system will have two stops and two openings on the same side. The car entrance will feature a stainless steel 304 hairline finish cabin, and the landing entrance will have a stainless steel 304 vertical bi-parting manual door. The car will be equipped with stainless steel collapsible doors, with a clear opening of 600 mm x 1000 mm height. The car\"s interior will be approximately 600 mm wide by 400 mm deep. The elevator well and pit dimensions will be 1200 mm wide and 600 mm deep. It will be controlled by a microprocessor-based system with a WVF drive and a geared traction machine placed above the hoistway. The main power supply is 415 V, 3-phase AC, and the auxiliary supply is 220/230 V, single-phase AC. The system will use 45 x 45 x 5 mm MS guide rails for the car and counterweight. Signal systems will include up/down arrows and displays at each landing, and safety features will include final limit switches, electromagnetic gate locks, electric switches on the car door, buffer springs, and D-locking systems, all as directed by the Engineer In-charge |
| 142 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of3 .15mm thickness reinforced with 35x35x5mm angle section fitted withs liding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar ,suspensions haft of minimum 32 mm diameter ,hood cover of M.S. sheet not less than 0.9mmt hickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coa to fred lead primer etc.complete.(I.S.62481979)(With mechanical gear) |
| 143 | Supply and installation of cubicles of width and depth as per Athena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. UChannel Wall joiner section size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete. |
| 144 | Providing and installing 50mm high extruded, matt anodized aluminium skirting, finished in an approved colour. The skirting will be 1.4mm thick and made from Aluminium Alloy conforming to ISFIE(63400) WP standards. It will be securely fixed using approved screws and capping, along with a matching aluminium cover plate. Additionally, an 8mm groove will be incorporated between the floor and the bottom edge of the skirting to accommodate carpet where necessary. All work will be carried out as directed by the Engineer In-charge. |
| 145 | Providing and installing a sliding folding movable partition with a 45dB acoustic rating. Each panel will be suspended on a single or double trolley (SS 304 grade with nylon coating) in a heavy-duty extruded aluminium top track (6063 T6 grade). The trolleys will be connected to the panels using steel trolley bolts. Rubber-based retractable seals will be installed at the top and bottom of the panels.The horizontal profiles of the panels will be made of 6063 T6 grade extruded aluminium, where the retractable frame will be accommodated, and the front edges of the decorative panel will be covered by a 10mm strip. The vertical profiles will be protected with full-height aluminium trims, also made of 6063 T6 grade extruded aluminium, where male/female profiles will fit, featuring vertical magnetic strips to snap together the tongue and groove unit frames.Each panel will be 85mm thick, constructed around an aluminium or MS frame, with 12mm MDF boards hung on both sides. The maximum panel width is 1800mm, though the recommended standard width is 1200mm. The aluminium nose and counter profiles will ensure tight closure between panels using PVC strips with a 55N pressure per linear meter. Additionally, 50mm thick, 64 kg/m³ density rockwool insulation will be placed between the MDF boards. All work will be carried out as directed by the Engineer In-charge |
| 146 | Providing and fixing SS Mosquito mesh in anodised (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) aluminium shutter fixed in sliding / openable / fixed windows conforming to IS:1948-1961 as per drawing and directed by Engineer In Charge. (Note: For Aluminum Sections, total weight shall be upto 3.5 kg/sq.m.) |
| 147 | Providing & supplying an ironing table with a press. The working table will have a size of 1300mm (W) x 800mm (D), with overall dimensions of 1500mm (W) x 800mm (D) x 1400mm (H). The table top will feature heat-resistant silicon padding, and the vacuum board will be uniformly perforated, covered with an aluminum mesh to ensure a perfect and uniform ironing finish. The perforated top will include layers of wire mesh, silicon foam, and a heat-resistant top cover, ensuring efficient airflow and keeping the padding dry at all times. All work will be carried out as directed by the Engineer In-charge, following the specifications and images provided. |
| 148 | Providing and supplying a foldable clothes drying stand made of alloy steel and plastic. The stand is powder-coated, designed to accommodate 1 and ½ washing machine loads. It is constructed with heavy-duty MS tubular pipes (15.8 mm) and MS rods (5 mm) to ensure durability and long-lasting performance. The stand\"s dimensions are 58 inches in length and 33 inches in height. All work will be carried out as directed by the Engineer In-charge, following the specifications and images provided. |
| 149 | Providing, supplying, and fixing a green chalkboard with a thickness of 19mm, and dimensions of 2400mm x 600mm. The board will feature aluminium edge beading around the perimeter. Additionally, a 50mm x 12mm thick beech wood beading will be applied around the board to cover the aluminium edges and secure the board in place. The beech wood will be polished and finished with a coat of melamine (Asian Paints). The quoted rate will include all costs related to transport, taxes, duties, loading / unloading, unpacking, lead and lift, hardware, labour, and any other associated work. The installation will be carried out as directed by the Engineer In-charge |
| 150 | Providing and fixing high-quality curtains made of 100% polyester fabric with a solid texture and 100% blackout capability, featuring a satin finish. The fabric has a GSM range of 250 to 300 for durability, with light tearing strength for easy handling. The curtain width will offer deluxe fullness, approximately two and a half times the window width. A stainless steel curtain rod with a diameter of 25mm, along with matching stainless steel finials (lattu) and heavy-duty single brackets, will be installed. The curtain channel or track will be made of stainless steel or aluminum for additional strength. The fabric width will range from 54\" to 60\". The rate includes the cost of eye holes, rod, holders, brackets, and all associated items. The installation will be carried out as directed by the Engineer In-charge. |
| 151 | Providing and fixing factory-made pelmets with dimensions of 200mm x 200mm, installed along walls and partitions. The pelmets will include vertical and horizontal components, supported by necessary 38mm x 38mm MS supports. The rate will cover all required accessories, such as anchor fasteners and other materials necessary for the complete installation. The work will be carried out as directed by the Engineer In-charge |
| 152 | Providing and fixing high-quality wooden skirting of 100mm x 15mm size, matching the specified design, and applying three coats of melamine polish in an approved shade. The installation will be carried out in various locations including the multi-purpose hall stage, green room, conference rooms (2nd and 5th floors), standing committee room (48 pax), committee chairman\"s waiting and ante rooms, main chamber, AMC room, office areas, war room, commissioner\"s ante room, mayor\"s ante room, HOD office, Mahasabha Sadan, Mahila Corporate, Mahila Bal Kalyan, municipal secretary office, Nagar Sachiv office, Gut Neta office (6th floor), VIP lounge, viewing gallery, audio-visual room, and Sabhapati room (6th upper floor). The work will be executed according to the detailed drawing, specifications, and instructions provided by the Engineer In-charge. |
| 153 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 154 | Providing & Fixing corner guard for columns at parking area size W100 x H800 x 8mm colour: Black with yellow or White Reflective Stickers Body Material: Modified Thermoplastics (Polymer Rubberized) Fixing: Fixed on the wall & corner of columns with six 2\" Screws. |
| 155 | Providing, detailing, and fabricating as per specifications, transporting to site and erecting Openable Entrance Gates fabricated using B Class GI Hollow pipes including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 18 to 20kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge. |
| 156 | Shifting of Medical College from CSMH to Lodha Luxuria G+12 Building includingthe meticulous dismantling, secure packing, safe transportation, and systematic reinstallation of all department items, instruments, and goods from the current location at CSMH to the designated G+12 building at Lodha Luxuria, Balkum. The process shall be executed under the supervision of the Dean or Engineer-in-Charge to ensure the safe handling and relocation of all assets without any damage. The scope of work include carefully dismantling and Packing ofall department assets, glassware, Microscopes, Sensor-based electrical and electronic equipment/instruments, Models and specimens. Use appropriate packing materials, such as bubble wrap, foam padding, and sturdy cartons, to safeguard items during handling and transit.Clearly label all packages for easy identification and systematic unpacking. Arrange for the safe transportation of all items to the new premises at LodhaLuxuria, ensure transport vehicles are equipped with proper cushioning, shock-absorbing mechanisms, and fastening systems to prevent damage during transit. Take additional precautions for fragile and high-value items, such as glassware, microscopes, and electronic sensor instruments. Unload and unpack all items at the designated locations within the new building premises as directed by the Dean or Engineer-in-Charge. |
| 157 | Shifting of Medical College from CSMH to Lodha Luxuria G+12 Building including Reinstall and set up all instruments, equipment, and goods in their respective areas, ensuring they are functional and damage-free. Organize and arrange items systematically to match or improve the operational efficiency of the original setup. Ensure all items, including microscopes, electronic equipment, and models, are reinstalled in their original condition. Provide a detailed inventory of all items before and after transportation for verification purposes. Obtain approval from the Dean or Engineer-in-Charge upon successful completion of the relocation and reinstallation process etc complete. |
| 158 | Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. complete. 2 seater |
| 159 | Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete. Fixed Pedestal Unit -Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thk Commercial Plywood (IS 303 : 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thk edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thk PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube, diameter 40mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, \"C\" Shape SS Brush finished handles as indicated in the drawing, suitable locking etc. complete. Accessories - Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provided with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated with seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided wherever required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). Size - 2100 X 750 X 750mm |
| 160 | Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete. Fixed Pedestal Unit -Width of drawer unit shall be of standard size of 450mm. Drawer tray shall of 18 mm thk Commercial Plywood (IS 303 : 1989) completely (bottom included) of size suitable to accommodate telescopic glides for smooth operation All visible edges of drawer trays shall have 2mm thk edge banding to match the colour of the fascia. Inside edge of trays shall have 0.8mm thk PVC edge banding to match the colour of the tray. Front Central lock to be provided for locking all drawers. Aluminium furniture feet – Round tube, diameter 40mm with 10 mm height adjustable with steel mounting plate with suitable finish to match handles, \"C\" Shape SS Brush finished handles as indicated in the drawing, suitable locking etc. complete. Accessories - Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provided with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated with seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided wherever required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). Size - 1950 X 750 X 750mm |
| 161 | Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. All edges of the work surface shall be provided with pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame. Gable End Supports of approved profile and design between tables consisting of 18mm Marine ply (IS 710 : 2010) panels duly edge bound (to be integrated with the partition. Adjustable levellers to be provided to supports.) etc. complete. Accessories :- Key Board Tray - Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size:-Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. Size - 1500 X 600mm & side 900 x 600mm |
| 162 | Providing and supplying Modular Pedestal unit with 3 drawers of required shape and size, 560 x 450 x 650 mm LxWxH. Top made of 18mm thick Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and 0.6mm balancing laminate on unexposed face. Sides in 18 mm both side Prelaminate Particle boards (Interior Grade) and Back made of 9mm thick both side prelaminated particle board, finished with 2 mm thick machine pressed PVC edge band on all edges etc. complete. Width of drawer unit |
| 163 | Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, dia 40 mm with 100 mm height with suitable finish to match handles’\" Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be make as per the instructions of Achitect in Charge. Size - 900 x 500 x 750mm |
| 164 | Providing and supplying Modular Side/Back Credenza made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins. Storage Back made of 9mm thick Marine ply (IS710 : 2010) etc. complete. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support. Multipurpose lock, Levelling Bolt with inserts etc. complete Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’\" Shape SS Brush finished handles as indicated in the drawing provided by architect,suitable locking provision. Execution of this item should be make as per the instructions of Achitect in Charge. Size - 1200 x 500 x 750mm |
| 165 | Providing and fixing Multiple Compartment Lockers of @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. |
| 166 | Providing and supplying canter table of required size with top made of 8mm thick clear toughened glass with bevelled edge from bottom edge of the glass border and vertical edge with polish etc. complete. Understructure made of 25mm thick Marine ply (IS 710 : 2010) with all exposed edge finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Nylon button stopper to hold glass top in position, Nylon bushers etc. complete. Size - 900 x 600 x 450mm |
| 167 | Providing & Fixing of Table having dimension 400mm Ht made of 18mm thick prelaminated particle board .The top is 10mm thick Glass supported on 4 nos. SS Studswith verticals also made of 18mm Particle board.The table has a shelf of 450mm L x 450mm W under the main top. All edges are sealed with 2 mm thick PVC Lipping. The above furniture should be as per specification and sample approved by client. Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , BIS and BIFMA Complaint member , BIFMA GOLD . Warranty 5 years .CORNER TABLEW450xD450xH400mm |
| 168 | Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on unexposed face. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame etc. complete. Execution of this item should be make as per the instructions of Achitect in Charge. Accessories Key Board Tray -. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). Size - 1200 x 600mm |
| 169 | Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on unexposed face. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame etc. complete. Execution of this item should be make as per the instructions of Achitect in Charge. Accessories Key Board Tray -. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). Size - 1800 x 600mm |
| 170 | Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on unexposed face. All edges of the work surface shall be provided with machine pressed PVC edge banding of 2mm thickness etc. complete. Table top to be principally mounted from the partition frame with suitable MS powder coated brackets which should be integrated into the partition frame etc. complete. Execution of this item should be make as per the instructions of Achitect in Charge. Accessories Key Board Tray -. Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provide with sliding telescopic channels. The tray hanged below the top by steel MS brackets. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pre-treatment of surface. ABS wire managers to be provided where required for the table top. CPU Trolley: Size: - Width: 180mm Depth: 245mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated after seven tanks anti corrosion pretreatment of surface. (Coating thickness 50 to 60 micron). Size - 1500 x 600mm |
| 171 | Providing and supplying a library rack with a height of 1890mm. The top panel will be made of CRCA sheet, while the side panels will be constructed from 18mm thick pre-laminated particle board of interior grade, laminated on both sides with an approved make and shade. The working and non-working edges will feature 2mm thick PVC edging, machine-pressed using hot melt glue at high temperature. The back panel will be made of CRCA metal sheet, powder-coated for durability. The brackets holding the shelves will be made from 2mm thick CRCA, and the metal shelves themselves will be 0.8mm thick CRCA, also with a powder-coated finish.The library rack will be designed as a single-side book rack, following the specifications and sample approved by the client. The product will come with a 5-year warranty from the date of invoice. Certifications include ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, BIS, and BIFMA-compliant membership, as well as BIFMA Gold certification. The installation will be carried out as directed by the Engineer In-charge, adhering to the attached image and specifications |
| 172 | Providing and fixing a round cafe table with a 25mm thick pre-laminated particle board (Grade II, Type-II) top, backed with 0.6mm laminate. Exposed edges will be finished with 2mm thick PVC lipping. The understructure will feature a stainless steel base with a diameter of 580mm. The table will have a diameter of 900mm and a height of 750mm. The furniture will be made according to the approved specifications and sample, as directed by the Engineer In-charge |
| 173 | Providing & Fixing of HNI Make table of Size.The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lippingmachine pressed. Legs are made of powdered coated steel 50mmx 50mm Section.Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client. TABLE:-W900xD900xH750mm As Directed by Engineer Incharge As per Image attached |
| 174 | Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lippingmachine pressed. Legs are made of powdered coated steel 50mmx 50mm Section.Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client.TABLE:-W1200xD750xH750mm As Directed by Engineer Incharge As per Image attached |
| 175 | Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lippingmachine pressed. Legs are made of powdered coated steel 50mmx 50mm Section.Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client. TABLE:-W1350xD750xH750mm As Directed by Engineer Incharge As per Image attached |
| 176 | Providing, supplying and installing the university seating system consists of 25mm thick prelaminated MDF worktops with dimensions of 600mm x 600mm, supported by a center post and a front post made of MS tube (100mm x 50mm). These posts are welded to metal plates (150mm x 125mm x 5mm) at the table top and to a bottom plate (200mm x 150mm x 12mm) for grounding, with the bottom plate size customizable based on floor finishing. The seating features 360-degree swivel swing arms, allowing users to rotate freely for ease of movement and collaboration. EN8 material pivot pins ensure the swing arms can support loads of up to 180-200kgs, with compression springs returning the arms to their original position. The seats, either \"Strive\" or \"Intellect Wave\" with an 18” width, are rotatable using high-end engineering plastics and an EN-8 center rod. The wire management system allows for wire entry from the vertical post\"s bottom, with electrical provisions required on the installation floor. The system can be installed on either solid concrete or metal false flooring. Seat heights are 18.5” (472mm) for an 800mm table height and 18.15” (462mm) for a 772mm table height, as specified by the engineer in charge. |
| 177 | Providing and fixing Wooden Dias of size 600 x 600 x 1420 mm height in as per the detail specification given below. Top size (600 x 600 mm) side (600 x 1420 mm), front side (600 x 1420mm) made up in 19 mm thick Marine Plywood (IS 710 : 2010) of requisite manufacturer\"s viz. Green/Anchor/Centuary or equivalent approved make including necessary facias etc. with necessary lipping (BTC), mouldings as required including cutting, fixing, finished with 1mm thick laminate of approved make ,type , colour and shade of glossy/ Matt/ Suede/ Fine/ Line/ Wood grain finished lamination pattern with/without grooves as required to exposed surface and edges and the internal/hidden surface shall be finished with 0.80 mm thick laminate of approved make. Area other than laminated surfaces shall be finished with two coats of French polish of approved shade. Antitermite treatment to plywood and woodwork with ten years guarantee bond etc. including all leads lifts etc. complete as per the instructions of the Architect & Engineer-in-charge. |
| 178 | Providing & Supplying Board Room Table. U-Shape Conference table 1)Worktop (Overall Thickness -36.8mm) cladded with Postforming Laminate with Curvica profile on user side in Approved Colour . Balancing Laminate on Underside and 2mm PVC Lipping on Working edges and 0.8mm PVC Edge Banding on non working edges.The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . 2)Curvica Profile.3) Legs shall be made from 36mm Marine Ply (18+18) having straight profile with half round edges and clad with 0.6mm thick Post-forming laminate. Overall thickness of the leg shall be 37mm. in Laminate as approved 4) Modesty Panel shall be made of Marine Ply of 18mm thick in Laminate as approved 5) Each seater module shall have dimensions 1500mm L x 600 DThe above furniture should be as per specification and sample approved by client. Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , BIS and BIFMA Complaint member , BIFMA GOLD ,Green Guard product specific certificate issued by UL Environment . Warranty 5 years .As Directed by Engineer Incharge As per Image attached |
| 179 | Providing, supplying and installing thecabinet, dimensions of 900mm (W) x 1660mm (H) x 450mm (D) and is constructed from prime quality 0.8mm thick CRCA steel for the body panels and shelves. The shelves are adjustable in height and have a uniformly distributed load capacity of 50kg per shelf. The vertical sides feature continuous slots for mounting shelves at variable heights. The entire carcass is finished with a 50 ±10 microns epoxy polyester powder coating.The facia of the cabinet consists of metal shutters with metal borders, incorporating toughened glass panels. The handles are D-shaped in an aesthetically pleasing design with a stainless steel (SS) finish. The locking mechanism uses a metal cam lock for security. Additionally, the cabinet is equipped with adjustable levelers featuring plastic bases, allowing height adjustments of up to 15mm.This furniture is built according to the specifications and samples approved by the client. It meets the required certifications including ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, BIS standards, and is a BIFMA Gold certified member. The product comes with a 5-year warranty. For the metal storage variant, the dimensions are W1200mm x D450mm x H1660mm. Installation and other details are as directed by the engineer in charge. |
| 180 | Providing and Supplying Reception table of overall size 1650 X 750 X 750 mm made out of 19 mm thick Marine ply (IS 710 : 2010) top Sides and apron having Top and bottom horizontal patta. The table shall be externally and internally finished with 4mm thick group match veneer pattern with grooves including necessary lipping moudling and hardware. 5 mm thick thoughened glass modesty shall be provided with 50 X 30 mm BTC wood frame etc. complete. Antitermite treatement to marine ply and all wooden accessories on both sides for full faces before the joineries melamine polish on french polish base coat, hardware as per drawings. etc. all complete as per Architects Drawing. |
| 181 | Providing and Fixing 12 Seater Reading Table for Library @3600L x 1200D x 750HT. Top : made from 25mm Prelaminated Particle board. All edges are covered by 2mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends: made from 25mm Prelaminated Particle board. All edges are covered by 2mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel: Made from 18mm both side prelaminated particle boards. All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. |
| 182 | Providing and supplying center pivot, revolving, High back chair Depth - 45cm, width-50cm, height- 121cm to 131cm & seat height 45cm to 55cm. (+/- 2cm) with five legged metal /moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. |
| 183 | Providing and supplying center pivot, revolving, Mid back chair Depth-45cm, width-50cm, height- 105cm to 115cm & seat height- 45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift, heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. |
| 184 | Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height-80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. The chair shall be Ergonimc Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as perphotograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. |
| 185 | Providing and supplying Desklet Chair, designed for training, features a backrest made of polypropylene (PP) upholstered with mesh for comfort and breathability. The backrest is connected to the frame using nylon connectors for stability. The metal frame is foldable and finished with a powder coating for durability. The chair includes adjustable arm pads, allowing for front and back adjustments to suit user preference. The seat cushion is equipped with glides for easy movement, and a tablet is integrated into the chair for added functionality. The product comes with a 1-year warranty from the date of invoice, and installation or specifications are as directed by the engineer in charge. |
| 186 | Providing and supplyingCafeteria Chair features a seat and backrest made from injection-molded polypropylene, ensuring durability and comfort. The seat is securely attached to the frame with a back attachment and two steel pal-nuts, while the backrest is also connected to the frame with two metal clips. The backrest includes a contoured handle opening at the top, allowing for easy lifting and stacking. The chair frame is constructed using welded 7/16\" diameter solid steel wire, shaped through CNC wire bending. A 7-gauge steel seat strap, ribbed for additional strength, supports the front of the seat, and a 7/16\" contoured steel rod connects the front legs for added stability. The frame is finished with a bright chrome plating, along with duplex nickel, semi-bright nickel, and chrome, providing corrosion resistance. The chair comes with a 5-year warranty, and the installation or other specifics are as directed by the engineer in charge. |
| 187 | Providing, designing, fabricating, supplying, erecting / installing, and commissioning complete Microbiology Practical Laboratory furniture as per the layout plan.The scope of work includes the following components:1. C-Frame Structures- Material: 60x30mm pipes, 2mm thicknes Dimensions: 705mm (L) x 880mm (H) x 30mm (D) Quantity: 68 units Purpose: Support for the workbenches and other furniture units. 2. Connecting Sets Types: 1500mm (48 units) and 750mm (6 units) Material: 2.5mm thick material Purpose: To connect C-frames and assemble the furniture. 3. Storage Units Types: 46 units: 1 drawer and 2 shutters (750mm L x 530mm D x 635mm H) 34 units: Sink storage with 2 shutters Material: 0.8mm thick CRCA sheet, epoxy powder coating Construction: Sandwich construction for drawers and shutters Hardware: Hettich telescopic channels, hinges, and Ozone locks Additional: Solid SS-304 handles for drawers and shutters4.Legspaces and Cover Plates Legspaces: 22 units with back cover platesEnd Cover Panels: 28 units Purpose: Aesthetic finish and support for the storage units.5. Additional Components Space Fillers: 14 units Sinks: 34 PP drop-in sinks with accessories Spouts: 34 three-way spouts with swivel swan necks Pegboards: 17 acrylic pegboards (600mm x 600mm) Eye Wash Station: 2-way eye wash station 6.Gas Valves Types: 14 two-way (180°) and 10 four-way (90°) units purpose: To control gas supply in the laboratory.7. Reagent Shelves Types: Two-tier upright reagent shelves with integrated raceways 10 units: 1500mm L x 300mm D x 750mm H 14 units: 750mm L x 300mm D x 750mm H Purpose: For storing chemicals and reagents.8. Electrical Components Sockets & Switches: 48 sets of 5A and 15A switches and socketsAnchor Roma / Norisys or equivalent Trunk Boxes: Electrical trunk boxes made of 1.0mm thick CRCA sheet, powder-coated 9. Stools Quantity: 66 height-adjustable stools Material: Powder-coated frames, SS-202 tops Design: Adjustable to sitting and standing heights 10. Full-Height Storage Units Quantity: 9 units Material: 0.8mm thick CRCA sheet with glass shutters Locks: Snap-shut locking system Coating: Epoxy powder-coated11. Granite Surface Area: 61 square meters of pre-polished jet black granite Edges: Chamfered corners for safety Purpose: Work surface for laboratory tasks 12. Neoprene for Granite Packing Length: 244 running meters of 6mm x 30mm neoprene |
| 188 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Prep Laboratory Furniture as per layout plan consist of following the Scope of Work Design, Fabrication, Supply, Erection/Installation, and Commissioning of complete Prep Laboratory Furniture according to the provided layout. Key Components 1. C-Frame Structures: Dimensions: 3 C-frame structures: 705mm L x 880mm H x 30mm D. Constructed from 60x30mm pipe, 2mm thick. Connecting Sets: 2 sets of 1500mm and 1 set of 750mm for the standing-height C-frame. 2. Storage Units: 2 units: 750mm L x 530mm D x 635mm H, with 1 drawer and 2 shutters each. 1 Sink Storage Unit: With 2 shutters.Legspace: With a back cover plate (750mm).End Cover Panels: 2 units for 750mm counter depth. Space Filler.3. Sink and Plumbing Components: PP Drop-in Sink: 560mm L x 355mm W x 245mm D.3-Way Spout: With a swivel swan neck.2-Way Eye Wash: As required for safety compliance.Stainless Steel Pegboard: 500mm x 400mm with 18 pegs and an integrated drain tray.4. Electrical Components: Electrical Raceway: 2 meters of single-sided CRCA electrical raceways (2m long, H-125mm x D-75mm), each with 3 cut-outs.Switches & Sockets: 3 sets of 5A and 15A switches and sockets, complying with standards.Electrical Trunk Boxes: Made from 1.0mm thick CRCA sheet, powder-coated for durability.5. Seating:3 Height-Adjustable Stools: Powder-coated frames with SS-202 tops.6. Countertops:Granite Surface: 2.5 square meters of pre-polished jet black granite with chamfered corners.Neoprene Packing: 10 running meters for securing the granite.7. Fume Hood:Dimensions: Full-height fume hood, 1200mm L x 900mm D x 2400mm H, with a heavy-duty CRCA/GI structure.Under-counter Storage Units: 2 units, 600mm L x 530mm D x 725mm H, with casters for mobility. 8. Frames and Supports:Heavy-Duty Frame: Supporting the fume hood with connecting sets and covering plates, dimensions: 1200mm L x 790mm D x 900mm H. 9. Material Specifications:100% Epoxy Powder-Coated CRCA Sheet as per IS: 513 (1994). Drawer & Shutter Fronts: Made from 1.2mm thick sheet, with sandwich construction.Other Parts (Panels, Backs, and Drawer Components): Made from 0.8mm thick CRCA sheet.\"C\" Frame: 60x30mm section, 2mm thick.10. Hardware: Telescopic Channels: Hettich brand. Hinges and Locks: Hettich/Ozone locks and hinges.Handles: Solid SS-304 for durability. Electrical Sockets: Anchor Roma / Norisys / or equivalent. Design & Construction Notes: The design includes both standing height (900mm) and sitting height (800mm) tables for ergonomic use.Box Sizes: Dimensions vary between L-1400mm, 750mm, 600mm,450mm, and Corner-850mm; height remains 635mm, with a depth of 530mm.Additional Considerations: All furniture and components are designed with durability, functionality, and safety standards in mind, ensuring a long-lasting and efficient laboratory workspace.The fume hood is designed for heavy-duty use and safety compliance.Would you like assistance with the next steps in this project, such as providing layouts or sourcing materials? |
| 189 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Incharge Room furniture as per layout plan The scope of work includes the following components: 1. C-Frame Structures (3 units) Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes, 2mm thickness Purpose: To support various furniture items in the room. 2. Connecting Sets (2 units) Dimensions: 1200mm length for standing height C-frame structures.Material: 60x30mm pipes, 2.5mm thickness. 3. Storage Units (3 units Dimensions: 600mm L x 530mm D x 635mm H Design: 1 drawer and 2 shutters per unit Material: 100% Epoxy Powder Coated CRCA Sheet Drawer and shutter fronts, top stiffeners: 1.2mm thick Panels, backs, and bottoms: 0.8mm thick 4. Legspace Unit (1 unit) Dimensions: 600mm L Design: Includes back cover plate and 2 end cover panels Counter depth of 750mm 5. Space Filler (1 unit) Purpose: To fill gaps and provide a more cohesive arrangement.6. Electrical Raceway (2 meters) Dimensions: 2m L x 125mm H x 75mm D Material: CRCA Design: Single-sided, with 3 cut-outs each, for electrical connections 7. Electrical Sockets and Switches Number: 3 sets of 5A and 15A switches and sockets Brand Options: Anchor Roma, Norisys, or equivalent 8. Height-Adjustable Stools (4 units) Material: Powder-coated frame, SS-202 tops Functionality: Adjustable height for comfort and convenience 9. Granite (2 square meters) Dimensions: 17±1mm thick, chamfered corners Color: Jet Black Purpose: Likely used for countertops or work surfaces 10. Neoprene Packing (8 running meters) Purpose: To secure and protect granite surfaces during installation Material and Construction Standards: Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994) Thickness Specifications: Drawer fronts, shutter fronts, and top stiffener: 1.2mm Shutters and drawers: Sandwich construction LH/RH panels, back, bottom, drawer body, and backs: 0.8mm Table Heights: Standing Height: 900mm Sitting Height: 800mm Hardware:Channels: Hettich telescopic channels Hinges & Locks: High-quality for durability Handles: SS-304 for strength and aesthetic appeal Electrical Trunk Box: 1.0mm thick CRCA for durability Overall Design Requirements:Drawer Sizes: Range from 450mm to 1400mm in length Table and Worktop Specifications: Proper structural integrity and ergonomic design for both standing and sitting arrangements Notes:All construction and assembly must adhere to the provided Laboratory Furniture Drawings and the Engineer Incharge\"s Directions.The design emphasizes quality, durability, and ergonomics, with materials and hardware chosen for their strength and long-lasting performance.Installation will be as per the layout and the specifications outlined in the project plan, ensuring efficient use of space and functionality.This detailed specification can be used to prepare for the fabrication, installation, and commissioning of the Incharge Room furniture setup. |
| 190 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Central Research Laboratory Furniture as per layout plan The scope of work includes the following components: Key Components: 1.C-Frame Structures:Dimensions: 705mm (L) x 880mm (H) x 30mm (D) Material: 60x30mm pipes with 2mm thickness.Quantity: 35 C-Frame structures.Accessories: 27 connecting sets of 1500mm, 1 set of 1200mm, and 1 set of 850mm for installation.2.Storage Units:Dimensions of units: Vary from 750mm L x 530mm D x 635mm H to corner sink storage units of 850+850mm L x 530mm D x 635mm H. Material: 100% Epoxy Powder Coated CRCA Sheet, as per IS: 513 (1994).Design Features: 1 drawer and 2 shutters in most units, with additional corner and sink storage configurations.Additional Legspaces: 22 units of 750mm and 1 unit of 600mm, all with back cover plates.3.End Panels and Space Fillers:End Cover Panels: 10 panels for 750mm counter depth.Space Fillers: 7 units. Sink and Accessories: 2 PP drop-in sinks (560mm L x 355mm W x 245mm D) with accessories.4. Plumbing Fixtures: Spouts: 2 three-way spouts with swivel swan necks. Eye Wash: 2-way eye wash system.5. Pegboards and Shelving: Acrylic Pegboards: 2 units of 600mm x 600mm.Reagent Shelves: 4 upright 2-tier shelves with integrated raceways.6. Electrical Installations:Electrical Raceway: 17 meters of single-sided CRCA raceway (2m L x 125mm H x 75mm D) with 3 cut-outs each.Electrical Sockets: 32 sets of 5A and 15A switches and sockets, with specified brands (Anchor Roma, Norisys, etc.).7. Stools:Height Adjustable Stools: 55 units with powder-coated frames and SS-202 tops.8. Granite Surfaces:Granite: 37 square meters of pre-polished jet black granite with chamfered corners.9. Other Components:Neoprene Packing: 148 running meters for granite.Design and Material Specifications:Storage Unit Construction:Drawer & Shutter Construction: Sandwich construction with drawer fronts, shutter fronts, and top stiffeners made from 1.2 mm thick material.Panel Thickness: LH/RH panels, back, bottom, drawer bodies, and backs are made from 0.8 mm thick material.Height of Tables: 900 mm standing and 800 mm sitting.Hardware:Drawer Slides and Hinges: Hettich telescopic channels, hinges, locks, and SS-304 handles for durability and smooth operation.Electrical Trunk Box: 1.0 mm thick CRCA.Additional Considerations:All components are designed and manufactured to meet the specified requirements for laboratory use, ensuring safety, durability, and functionality.Customization: All hanging storage units are designed with epoxy powder-coated CRCA sheet, offering high resistance to corrosion.Quality Assurance: Use of premium brands for electrical components (Anchor Roma, Norisys, etc.) and hardware, ensuring reliability. This comprehensive package is tailored to meet the needs of a well-equipped central research laboratory, incorporating functional storage, utilities, and electrical installations. The furniture design ensures ease of use, access, and durability, with all installations made as directed by the Engineer In-Charge. |
| 191 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Microscopy Laboratory Furniture as per layout plan approvedthe scope of work includes the following components:1. Key Components: C-Frame Structures:Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes, 2mm thickness Configuration: 4 C-Frame structures with 2 connecting sets of 1200mm and 1 set of 750mm for standing-height C-frame installations.2. Storage Units: Unit 1: 750mm L x 530mm D x 635mm H with 1 drawer and 2 shutters.Unit 2 (x2): 600mm L x 530mm D x 635mm H with 1 drawer and 2 shutters. 3.Legspaces & Cover Panels:Legspace Dimensions: 600mm Cover Panels: Includes back cover plates and end cover panels for 750mm counter depth.4. Additional Components:Space Filler Electrical Raceways: 3 meters of single-sided CRCA electrical raceways (2m L x 125mm H x 75mm D) with 3 cut-outs. Electrical Switches and Sockets: 5 sets of 5A and 15A switches and sockets.Height-Adjustable Stools: 5 stools with powder-coated frames and SS-202 tops. - Granite Surface: 3 square meters of pre-polished jet black granite (17±1mm thick) with chamfered corners.5. Construction and Material Specifications:Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Thickness: Drawer fronts, shutter fronts, and top stiffener (1.2 mm thick), while other panels like LH/RH, back, bottom, and drawer body (0.8 mm thick).C-Frame: 60 x 30 mm with 2 mm thickness.Connecting Sets: Minimum 2.5 mm thickness. 6. Dimensions and Table Heights: Box Sizes: Range from 450 mm to 1400 mm in length, 635 mm height, and 530 mm depth.Table Heights: 900 mm for standing and 800 mm for sitting positions.7. Hardware:Drawer and Shutter Hardware: Hettich telescopic channels, hinges, locks, and SS-304 handles.Electrical Trunk Box: 1.0 mm thick CRCA.Sockets: Anchor Roma, Norisys, or equivalent brands for quality and durability.General Instructions:The furniture should be built according to the provided layout plan and laboratory furniture drawings, ensuring compliance with all the dimensions and specifications mentioned.The furniture must be installed as directed by the Engineer Incharge and fully commissioned.This setup is designed to meet the needs of a microscopy laboratory, ensuring both functionality and durability. It emphasizes high-quality materials, precise construction, and ergonomic design, while also providing advanced features like adjustable tables and integrated electrical systems for efficient laboratory work. |
| 192 | The detailed specification provided outlines the requirements for the design, fabrication, supply, erecting/ installation, and commissioning of laboratory furniture for a Morbid Anatomy and Histopathology/Cytopathology laboratory. The key components mentioned involve a range of structural, storage, plumbing, and electrical items. as approvedthe scope of work includes the following components1. C-Frame Structures:56 units: 705mm (L) x 880mm (H) x 30mm (D).Material: 60x30mm pipes with 2mm thickness.47 connecting sets of 1500mm and 2 sets of 750mm for standing-height C-frame installations.2. Storage Units:38 units: 750mm (L) x 530mm (D) x 635mm (H) with 1 drawer and 2 shutters.32 units: 750mm (L) x 530mm (D) x 635mm (H) with 2 shutters.26 leg spaces with back cover plates (750mm).12 end cover panels for 750mm counter depth with standing height.6 space fillers.3. Sinks and Spouts:32 PP drop-in sinks: 560mm (L) x 355mm (W) x 245mm (D), with accessories.32 three-way spouts with swivel swan necks.4. Pegboards and Drain Trays:20 units of SS-304 pegboards: 500mm x 400mm, with integrated drain trays.5. Eyewash Stations:1 two-way eye wash station.6. Gas Valves:6 one-way gas valves. 9 two-way gas valves with 180-degree turn.10 four-way gas valves with 90-degree turn.7. Reagent Shelves:10 upright reagent shelves (2-tier with integrated raceways): 1500mm (L) x 300mm (D) x 750mm (H).4 smaller reagent shelves (2-tier with integrated raceways): 750mm (L) x 300mm (D) x 750mm (H).8. Electrical Components:39 sets of 5A and 15A switches and sockets with faceplates.Electrical trunk box: 1.0mm thick CRCA.9. Furniture Construction:100% Epoxy Powder Coated CRCA Sheet (IS: 513-1994).Drawer and shutter fronts: 1.2mm thick, sandwich construction. panels, back, bottom, and drawer body: 0.8mm thick.C-frame: 60x30mm with 2mm thickness.Connecting sets: 2.5mm thickness.Table heights: 900mm (standing) and 800mm (sitting). Hardware: Hettich telescopic channels, hinges, locks, and SS-304 handles.10. Stools and Granite:62 height-adjustable stools with powder-coated frames and SS-202 tops.57 square meters of pre-polished jet black granite with chamfered corners.228 running meters of neoprene packing for granite.11. Materials:The materials used for furniture construction are specified, ensuring durability and quality. The epoxy powder coating ensures resistance to corrosion, suitable for the laboratory environment.Summary:This package is designed for a fully equipped laboratory, with a detailed and robust set of specifications to ensure the proper design and functionality of the laboratory furniture. The furniture is made of durable materials, including CRCA sheet metal with epoxy powder coating, ensuring longevity and performance in a laboratory setting. The inclusion of sinks, reagent shelves, pegboards, gas valves, and electrical components ensures that all necessary laboratory functions are met efficiently. |
| 193 | Providing outlines a comprehensive scope of work for designing, fabricating, erecting/ supplying, installing, and commissioning a complete FMT Research Laboratory Furniture system.as per the approved layout plan. The scope of work includes the following components: Components of the Laboratory Furniture System:1. Standing C-Frames:Quantity: 16 Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes with 2mm thickness Usage: To support the overall framework for the laboratory furniture.Connecting Sets: 12 sets of 1500mm, 1 set of 600mm for connecting the standing C-frames.2. Storage Units:Quantity: 14 units Dimensions: 750mm L x 530mm D x 635mm H Features: 1 drawer and 2 shutters per unit.Material: Epoxy powder-coated CRCA sheet (1.2mm thick for drawer fronts, shutter fronts, and top stiffeners, 0.8mm thick for other panels).3. Sink Storage Unit:Quantity: 1 unit Dimensions: 600mm L x 530mm D x 635mm H Features: 2 shutters. 4. Legspaces: Quantity: 10 units Dimensions: 750mm Features: Back cover plates for a tidy finish.5. End Cover Panels: Quantity: 6 panels Purpose: For 750mm counter depth. 6. Space Fillers: Quantity: 3 units Purpose: For filling gaps in the layout design. 7. PP Drop-in Sink: Quantity: 1 Dimensions: 560mm L x 355mm W x 245mm D Accessories: Bottle-trap and hose pipe. 8. Spout: Quantity: 1 Features: Three-way spout with a swivel swan neck. 9.SS-304 Pegboard:Quantity: 1 Dimensions: 500mm x 400mm Accessories: Integrated drain tray.10. Two-way Eye Wash: Quantity: 1 Purpose: For emergency use in the laboratory.11. Upright Regent Shelves: Quantity: 2 units Dimensions: 1500mm L x 300mm D x 750mm H Features: 2-tier with integrated raceways. 12. Electrical Raceway: Quantity: 7 meters Type: Single-sided CRCA electrical raceway Dimensions: Max L-2m, H-125 x D-75 mm Design Layout and Dimensions:Table Heights: 900mm standing height and 800mm sitting height.Box Sizes: Range from 450mm to 1400mm in length, 635mm in height, and 530mm in depth.Final Notes:The final design will adhere to the provided layout drawings and specific engineering instructions.The furniture is constructed with high standards for both functionality and durability, ensuring it meets the operational needs of the research laboratory.This comprehensive setup of laboratory furniture ensures the work environment is functional, organized, and conducive to research activities, combining robust construction with efficient design. |
| 194 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Hematology Laboratory Furniture as per the approved layout plan. The scope of work includes the following components: 1. Standing C-Frames: Quantity: 50 standing C-frames Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes with 2mm thickness Connecting Sets: 42 sets of 1500mm and 1 set of 750mm for standing-height C-frame structures. 2. Storage Units: Quantity: 33 storage units Dimensions: 750mm L x 530mm D x 635mm H Features: 1 drawer and 2 shutters per unit. 3. Sink Storage Units: Quantity: 29 units Dimensions: 750mm L x 530mm D x 635mm H Features: 2 shutters per unit.4. Legspaces and Covers: Quantity: 23 legspaces Dimensions: 750mm Features: Back cover plates for the legspaces. 5. End Cover Panels: Quantity: 10 panels for 750mm counter depth.6. Space Fillers:Quantity: 5 fillers.7. PP Drop-In Sinks: Quantity: 29 sinks Dimensions: 560mm L x 355mm W x 245mm D Features: Bottle trap and hose pipes.8. Three-Way Spouts: Quantity: 29 spouts with swivel swan necks. 9. Pegboards:Quantity: 18 SS-304 pegboards Dimensions: 500mm x 400mm Features: Integrated drain trays. 10. Eye Wash Station:Quantity: 1 two-way eye wash. 11. Upright Reagent Shelves: Quantity: 9 shelves (2-tier with integrated raceways, 1500mm L x 300mm D x 750mm H) Quantity: 4 shelves (2-tier with integrated raceways, 750mm L x 300mm D x 750mm H) Quantity: 6 shelves (2-tier with integrated raceways, 1500mm L x 150mm D x 750mm H)Quantity: 2 shelves (2-tier with integrated raceways, 750mm L x 150mm D x 750mm H) 12. Electrical Setup: Switches and Sockets: Quantity: 34 sets (5A and 15A switches with faceplates) Brands: Anchor Roma, Norisys, or equivalent 13. Stools: Quantity: 56 stools Features: Powder-coated frames and SS-202 tops.14. Granite Support and Top: Granite Support (Standing Height) Quantity: 0.6 meters of support Dimensions: 300 to 1000mm L x 300mm D x 875mm H, made with 30x30mm pipe.Pre-polished Granite: Quantity: 51 square meters Color: Jet black with chamfered corners.Neoprene Packing for Granite: Quantity: 204 running meters.Materials and Construction Details: Construction Material: 100% Epoxy Powder Coated CRCA Sheet (per IS: 513 1994).Thickness of Components:Drawer fronts, shutter fronts, and top stiffener: 1.2mm thick Shutters and drawers: Sandwich construction.LH/RH panels, back, bottom, drawer body, and backs: 0.8mm thick.C-Frame: Dimensions: 60x30mm with 2mm thickness.Connecting sets: At least 2.5mm thickness.Box Sizes: Ranges from 450mm to 1400mm in length, with a height of 635mm and depth of 530mm.Table Heights:Standing height: 900mm.Sitting height: 800mm.Hardware:Drawer Slides: Hettich telescopic channels.Other Hardware: Hinges, locks, SS-304 handles, and electrical trunk box (1.0mm thick CRCA).This specification outlines the design and construction of a fully functional, durable, and high-quality laboratory furniture system designed for hematology labs, ensuring optimal storage, workflow, and accessibility. The materials and hardware used provide reliability and longevity to withstand the demands of a laboratory environment. |
| 195 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Prep Room Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:Key Components and Specifications 1. Standing C-Frames Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes, 2mm thickness Number of Units: 4 Structure: Includes 2 connecting sets (1500mm each) and 1 set (750mm) for standing-height C-frame structures. 2. Storage Units Size: 750mm L x 530mm D x 635mm H Configuration:2 units with 1 drawer and 2 shutters 1 sink storage unit with 2 shutters3. Leg Spaces & Cover Panels Number of Leg Spaces: 2 (750mm each) Includes: Back cover plates and end cover panels for 750mm counter depth. Space Filler: 1 unit. 4. Sink & Plumbing Sink Type: PP drop-in sink Dimensions: 560mm L x 355mm W x 245mm DAccessories: Bottle-trap and hose pipe, 3-way spout with a swivel swan neck. 5. Electrical Setup- Raceways: 3 meters of single-sided CRCA electrical raceways (2m L x 125mm H x 75mm D) with 3 module cut-outs.Switches & Sockets: 4 sets of 5A and 15A switches and sockets with faceplates.Material: CRCA for raceways, Anchor Roma or equivalent for sockets and switches.6. Storage Units (Full Height) Dimensions: 1980mm H x 910mm W x 480mm D Material: Glass shutters for 5 units.7. Stools Number of Units: 4 height-adjustable stools. material: Powder-coated frames and SS-202 tops.8. Countertops Material: Pre-polished jet black granite.Size: 3 sqm with chamfered corners.9. Packing Neoprene Packing: 12 running meters for granite.10. Material Specifications Main Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Thicknesses:Drawer fronts, shutter fronts, and top stiffener: 1.2 mm Shutters and drawers: Sandwich construction Panels (LH/RH, back, bottom, drawer body, and backs): 0.8 mm C-Frame: 60x30 mm with 2 mm thickness, connecting sets at least 2.5 mm thick.Table Heights: 900 mm (standing) and 800 mm (sitting).11. Hardware Brand: Hettich telescopic channels, hinges, locks, SS-304 handles.Electrical Components: Trunk box is 1.0 mm thick CRCA.Design Considerations Layout: Must adhere to the provided laboratory furniture layout drawings.Finish: Powder coating for corrosion resistance and durability.Electrical Setup: The installation should comply with standard safety protocols for laboratory settings.Key Features:High durability due to the use of epoxy powder coating and stainless steel.High functionality with well-organized storage and workspace.Robust electrical wiring and components for laboratory needs.Conclusion:This detailed description outlines the scope of work for the preparation, installation, and commissioning of laboratory furniture, incorporating high-quality materials for long-lasting durability and functional design. The project ensures a well-equipped workspace with comprehensive storage, plumbing, and electrical facilities, and all elements should be manufactured and installed in compliance with the provided specifications and drawings. |
| 196 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Physiology Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:1. Standing C-Frames:Quantity: 17 units Dimensions: 705 mm (L) x 880 mm (H) x 30 mm (D Material: 60x30 mm pipes, 2 mm thickness (Epoxy Powder Coated CRCA Sheet as per IS: 513, 1994) Purpose: Support for the laboratory counters and workspaces.2. Connecting Sets: Quantity: 13 sets of 1500 mm, 1 set of 600 mm Material: At least 2.5 mm thick to connect standing C-frames.3. Storage Units: Quantity: 15 units Dimensions: 750 mm (L) x 530 mm (D) x 635 mm (H) Features: 1 drawer, 2 shutters, sandwich construction.Materials: 1.2 mm thick for drawer fronts, shutter fronts, and top stiffener; 0.8 mm for other parts.4. Sink Storage Unit:Quantity: 1 unit Dimensions: 600 mm (L) x 530 mm (D) x 635 mm (H)Features: 2 shutters.5. Legspaces:Quantity: 11 units Dimensions: 750 mm width, with back cover plates for the counter.6. End Cover Panels:Quantity: 6 units for 750 mm counter depth.7. Space Fillers:Quantity: 3 units to cover gaps or provide additional support.8. Sink and Plumbing:PP Drop-In Sink:Dimensions: 560 mm (L) x 355 mm (W) x 245 mm (D) Additional Features: Includes bottle-trap and hosepipe.Spout:Type: Three-way spout with a swivel swan neck.Pegboard:Material: Stainless Steel 304.Dimensions: 500 mm x 400 mm. Features: 18 pegs with an integrated drain tray.9. Electrical Setup:Raceways: 8 meters of single-sided CRCA (2m L x 125mm H x 75mm D) with 3 module cut-outs.Sockets and Switches: 15 sets of 5A and 15A switches and sockets with faceplates (Brands: Anchor Roma, Norisys, or equivalent).10. Stools:Quantity: 26 unitsMaterial: Powder-coated pipe frames, SS-202 tops.Features: Height-adjustable.11. Granite Top:Area: 17 sqm Material: Pre-polished jet black granite with chamfered corners.12. Neoprene Packing: Length: 68 meters for securing granite.Material Specifications:Material for Construction: 100% Epoxy Powder Coated CRCA Sheet.Construction Details:Drawer fronts, shutter fronts, and top stiffener are 1.2 mm thick.Drawer body, back, bottom, LH/RH panels, and backs are 0.8 mm thick.C-frame pipes are 60 x 30 mm with a 2 mm thickness.Additional Hardware:Hettich Telescopic Channels: For smooth sliding of drawers.Hinges: For doors and shutters.Locks: For secure storage.Handles: Stainless Steel 304.Electrical Trunk Box:Material: CRCA 1.0 mm thick.This description represents a highly specialized laboratory setup, designed with high-quality materials and built to last. The furniture is designed for durability and functionality, with specialized storage solutions, electrical setups, and precise material choices to suit the specific requirements of a physiology laboratory.Anchor Roma, Norisys, or equivalent brands, ensuring durability and quality. |
| 197 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Biochemistry Research Laboratory Furniture as per layout plan. The scope of work includes the following components: Main Components:1. Standing C-Frames (17 units)Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipes with 2mm thickness Includes 13 connecting sets of 1500mm and 1 set of 600mm 2. Storage Units (15 units) Dimensions: 750mm L x 530mm D x 635mm H Features: 1 drawer and 2 shutters per unit 3. Sink Storage Unit (1 unit) Dimensions: 600mm L x 530mm D x 635mm H Features: 2 shutters 4. Legspaces (11 units) Dimensions: 750mm each with back cover plates5. End Cover Panels (6 units) Size: For 750mm counter depth 6.Space Fillers (3 units) 7. PP Drop-In Sink (1 unit) Dimensions: 560mm L x 355mm W x 245mm D Includes: Bottle trap and hose pipe 8.Three-Way Spout (1 unit) Features: Swivel swan neck 9.SS-304 Pegboard (1 unit)- Dimensions: 500mm x 400mm Includes: 18 pegs and integrated drain trayElectrical Setup:1. Electrical Raceway (8 meters)Dimensions: 2m L x 125mm H x 75mm D Features: 3 module cut-outs 2.Switches & Sockets (15 sets) Includes: 5A and 15A switches with faceplates Furniture and Fixtures:1. Height-Adjustable Stools (26 units)Features: Powder-coated pipe frames and SS-202 tops 2. Granite Surface (17 sqm)Features: Pre-polished jet black granite with chamfered corners 3. Neoprene Packing (68 meters) Used for securing granite Material and Construction:1. Material Specifications:CRCA Sheet: 100% Epoxy Powder Coated as per IS: 513 (1994)Drawer & Shutter Construction: Sandwich construction with a 1.2 mm thick front and a 0.8 mm thick back and body. C-Frame: 60x30 mm with 2 mm thickness Connecting Sets: At least 2.5 mm thick2. Furniture Dimensions:Box Sizes: Ranges from 450 mm to 1400 mm in length, with a height of 635 mm and depth of 530 mm- Table Heights: 900 mm for standing and 800 mm for sitting positions Hardware: Channels: Hettich telescopic channels Hinges, Locks & Handles: SS-304 for durability and ease of use Electrical Trunk Box: 1.0 mm thick CRCA Electrical Components: Sockets: From Anchor Roma, Norisys, or equivalent brands General Notes:All components are designed and fabricated to match the specifications for a Biochemistry Research Laboratory, ensuring functionality, durability, and safety.The furniture is customized based on the layout plan, with quality materials and hardware for laboratory standards.This project aims to provide a fully functional and reliable laboratory setup, with high-quality materials, electrical components, and storage units, ensuring smooth research operations. |
| 198 | Providing, Designing,Fabrication, Supply, Erection/ Installation & commission of a complete Bio chem Laboratory Furniture as per the approved layout plan. The scope of work includes the following components: 1. Structural Frames 79 Standing C-frames: 705mm (L) x 880mm (H) x 30mm (D) made from 60x30mm pipes with 2mm thickness.67 Connecting Sets:1500mm x 2 600mm x 2 1350mm x 1 These are used to connect the standing C-frame structures.2. Storage Units 49 Storage Units: 750mm (L) x 530mm (D) x 635mm (H) with 1 drawer and 2 shutters.47 Sink Storage Units: 750mm (L) x 530mm (D) x 635mm (H) with 2 shutters.3 Smaller Storage Units: 600mm (L) x 530mm (D) x 635mm (H) with 1 drawer and 2 shutters.3. Legspace and Panels 39 Legspaces: 750mm with back cover plates.12 End Cover Panels: For 750mm counter depth.6 Space Fillers.4. Sink & Plumbing Components 47 PP Drop-in Sinks: 560mm (L) x 355mm (W) x 245mm (D) with bottle traps and hose pipes.47 Three-Way Spouts: With swivel swan necks.Providing, Designing,Fabrication, Supply, Erection/ Installation & commission of a complete Bio chem Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:1. Structural Frames 79 Standing C-frames: 705mm (L) x 880mm (H) x 30mm (D) made from 60x30mm pipes with 2mm thickness.67 Connecting Sets: 1500mm x 2 600mm x 2 1350mm x 1 These are used to connect the standing C-frame structures. 2. Storage Units 49 Storage Units: 750mm (L) x 530mm (D) x 635mm (H) with 1 drawer and 2 shutters. 47 Sink Storage Units: 750mm (L) x 530mm (D) x 635mm (H) with 2 shutters. 3 Smaller Storage Units: 600mm (L) x 530mm (D) x 635mm (H) with 1 drawer and 2 shutters.3. Legspace and Panels 39 Legspaces: 750mm with back cover plates.12 End Cover Panels: For 750mm counter depth.6 Space Fillers. 4. Sink & Plumbing Components 47 PP Drop-in Sinks: 560mm (L) x 355mm (W) x 245mm (D) with bottle traps and hose pipes.47 Three-Way Spouts: With swivel swan necks.Plumbing Valves:6 one-way gas valves for LPG.10 two-way gas valves (180-degree).15 four-way gas valves (90-degree). 5. Reagent Shelving 19 Upright Regent Shelves: 1500mm (L) x 300mm (D) x 750mm (H) with integrated raceways.Additional Reagent Shelves: 10 at 750mm (L). 2 at 600mm (L). 1 at 1500mm (L).2 at 750mm (L) with smaller depths.6. Electrical Components 56 Sets of Switches & Sockets: Includes 5A and 15A switches with faceplates.7. Seating 89 Height-Adjustable Stools: Powder-coated pipe frames and SS-202 tops.8. Countertops 85 sqm of Pre-polished Jet Black Granite: With chamfered corners.340 Meters of Neoprene Packing: For securing granite.9. Fume Hoods and Support Structures 2 Full-Height Fume Hoods: 1500mm (L) x 900mm (D) x 2400mm (H) with heavy-duty CRCA/GI upper structures.2 Under-Counter Storages: Chemical-resistant polypropylene (750mm L x 530mm D x 725mm H).2 Heavy-Duty Frames: With connecting sets and covering plates for fume hood support.10. Materials and Construction Specifications Construction Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Thickness Specifications:Drawer fronts, shutter fronts, and top stiffener: 1.2mm.Shutters and drawers: Sandwich construction.Panels (LH/RH, back, bottom, drawer body): 0.8mm.C-frame: 60x30mm with 2mm thickness.Connecting sets: 2.5mm thickness.Electrical trunk box: 1.0mm CRCA.11. Hardware Hettich telescopic channels, hinges, locks, and SS-304 handles. Sockets: Anchor Roma, Norisys, or equivalent for durability.Table Heights Standing Height Tables: 900mm. Sitting Height Tables: 800mm.Additional Details The laboratory furniture is designed for efficiency, durability, and functionality in a bio-chemical environment. All the components are customized to meet the layout and requirements of the laboratory space, ensuring optimal space utilization and accessibility. The fume hoods and storage units are designed to handle the specific needs of chemical laboratory work, with chemical-resistant materials and ample storage space.The furniture package ensures that all aspects of the laboratory whether storage, plumbing, or electrical systems—are addressed with high-quality materials and professional-grade fixtures. The installation process will follow strict guidelines to ensure that the layout, design, and components are integrated seamlessly into the laboratory space, delivering a fully functional and safe environment. |
| 199 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Preperation Room Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:1. Standing C-Frames:Quantity: 6 units Dimensions: 705mm (L) x 880mm (H) x 30mm (D Material: 60x30mm pipe with 2mm thickness Purpose: To provide support for the laboratory structure, forming the base frame for counter units and storage. 2. Connecting Sets:2 sets of 1500mm 2 sets of 1350mm Material: CRCA (Cold-Rolled Close Annealed) sheet with 2.5mm thickness Purpose: To connect standing C-frames and complete the modular laboratory structure. 3. Storage Units: 4 units of 750mm L x 530mm D x 635mm H Each with 1 drawer and 2 shutters 1 Sink Storage Unit (750mm L x 530mm D x 635mm H) With 2 shutters 1 Smaller Storage Unit (600mm L x 530mm D x 635mm H)With 1 drawer and 2 shutters Purpose: For general storage, keeping lab essentials organized and secure.4. Legspaces:2 unit 1 unit: 750mm wide with back cover plate 1 unit: 600mm wide with back cover plate Purpose: To provide accessible space for users while maintaining a neat and functional design.5. End Cover Panels: Quantity: 4 panels Dimensions: 750mm counter depth and standing height Purpose: To cover the exposed sides of the furniture and ensure a clean finish. 6. Space Fillers:Quantity: 2 units Purpose: To fill any gaps between units for a uniform and smooth finish.7. Sink & Plumbing Accessories:PP Drop-in Sink (560mm L x 355mm W x 245mm D) Includes bottle trap and hose pipe Three-way Spout with Swivel Swan Neck Purpose: Essential for sink and water management in the laboratory workspace.8. Electrical Installation:Electrical Raceway: 5 meters of single-sided CRCA electrical raceway (2m max length) with 3 six-module cut-outs Sockets and Switches: 7 sets of 5A and 15A switches and sockets with faceplates Purpose: To provide electrical connectivity for equipment and lighting.9. Stools:Quantity: 7 units Design: Height-adjustable stools with powder-coated pipe frames and SS-202 tops Purpose: For seating, providing comfort and flexibility for laboratory personnel.10. Full-Height Storage Units: Quantity: 3 units Dimensions: 1980mm (H) x 910mm (W) x 480mm (D) With glass shutters and snap-shut locking system Made from 0.8mm virgin CRCA sheet Purpose: For vertical storage with secure, transparent glass shutters for easy access and visibility.11. Granite Countertop: Quantity: 5 sqm Material: Pre-polished jet black granite with chamfered corners Purpose: To provide durable, easy-to-clean work surfaces for laboratory activities.12. Neoprene Packing for Granite:Quantity: 20 meters Purpose: To ensure proper cushioning and protection during transportation and installation of granite surfaces.Material Specifications:Construction Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Thickness of Components:Drawer fronts, shutter fronts, and top stiffeners: 1.2mm thick Shutters and drawers: Sandwich construction LH/RH panels, back, bottom, drawer body, and backs: 0.8mm thick C-frame: 60 x 30mm, 2mm thickness Connecting sets: Minimum 2.5mm thickness Hardware:Hettich telescopic channels, hinges, locks, and SS-304 handles for durability and quality.Electrical trunk box: 1.0mm thick CRCA Sockets: Anchor Roma, Norisys, or equivalent brands.Countertop and Table Dimensions:Table Heights:800mm for sitting height Box Sizes: 450mm to 1400mm in length, 635mm in height, and 530mm in depth.Design and Installation Notes:Compliance: All materials and installations must comply with relevant standards and regulations. Finish: The entire structure must be clean, durable, and aesthetically appropriate for a laboratory environment.Instructions: The furniture should be assembled and installed in accordance with the provided drawings and as directed by the Engineer In-charge.Final Product Expectation:The final setup will be a fully functional, ergonomically designed, and safe laboratory workspace, complete with all necessary furniture, fixtures, and utilities as specified, ready for immediate use in the preparation room.Please let me know if you require any further details or clarifications! |
| 200 | Providing, Designing, Fabrication, Supply, Erection / Installation & commission of a complete Preperation Room Laboratory Furniture as per layout plan The scope of work includes the following components:1. Material Specifications:Epoxy Powder Coated CRCA Sheet (100% compliance with IS: 513 (1994)).Drawer fronts, shutter fronts, & top stiffeners: 1.2 mm thickness.Shutters & drawers: Sandwich construction for enhanced durability.Panels (LH/RH, back, bottom): 0.8 mm thickness.C Frame: 60 x 30 mm with 2 mm thickness.Connecting sets: Minimum 2.5 mm thickness.2. Dimensions:Box Sizes: Ranges from 450 mm to 1400 mm (length), 635 mm (height), and 530 mm (depth).Table Heights:Standing: 900 mm Sitting: 800 mm. Hardware:Telescopic Channels: Hettich or equivalent.Hinges, Locks, and SS-304 Handles: For durability and functionality.Electrical Trunk Box: 1.0 mm thick CRCA sheet.Sockets: Anchor Roma, Norisys, or equivalent brands ensuring quality and reliability.4. Other Requirements:The design and installation must adhere to the provided layout plans and directions from the Engineer In-charge.All hanging storage units are made from epoxy powder-coated CRCA sheet.The furniture must be robust, durable, and suitable for laboratory use, ensuring safety and long-term functionality.This specification should be referred to during the procurement, design, and installation stages of the project to ensure consistency with the required standards. |
| 201 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Pharmac Laboratory Furniture as per layout plan The scope of work includes the following components:1. C-Frame Structures 8 Standing C-frames: Dimensions 705mm L x 880mm H x 30mm D.Material: 60x30mm pipe with 2mm thickness.Connecting sets: 1500mm, 1350mm, 1200mm, 850mm.2. Storage Units Corner Sink Storage Unit: 850+850mm L x 530mm D x 635mm H with 1 shutter.5 Storage Units: 750mm L x 530mm D x 635mm H, each with 1 drawer and 2 shutters.Sink Storage Unit: 600mm L x 530mm D x 635mm H with 2 shutters.3. Legspaces 4 Legspaces: 750mm width, with back cover plates.2 Legspaces: 600mm width, with back cover plates.4. Cover Panels and Space Fillers End Cover Panels: For 750mm counter depth with standing height.Space Fillers: Additional pieces to complete the assembly.5. Sinks and Pegboards PP Drop-in Sink: 560mm L x 355mm W x 245mm D, includes bottle trap and hose pipe.Three-Way Spout: With swivel swan neck.SS-304 Pegboard: 500mm x 400mm, includes 18 pegs and an integrated drain tray.6. Safety and Electrical Components Two-Way Eye Wash: Imported (Broen Denmark/NovaLab Germany or equivalent). Electrical Raceway: 9 meters of CRCA, with 3 six-module cut-outs.Switches and Sockets: 12 sets of 5A and 15A switches with faceplates (no wiring).7. Stools and Granite Height-Adjustable Stools: 12 units with powder-coated pipe frames and SS-202 tops.Granite: 9 sqm of pre-polished jet black granite with chamfered corners.Neoprene Packing: 36 meters underneath for granite support.8. Materials and Hardware Specifications Furniture Construction: Epoxy Powder Coated CRCA Sheet, in accordance with IS: 513 (1994).Panel Thickness:Drawer fronts, shutter fronts, and top stiffener: 1.2mm.Panels (LH/RH, back, bottom, etc.): 0.8mm.C-frame: 60x30mm with 2mm thickness, connecting sets at least 2.5mm thick.Hardware: Hettich telescopic channels, hinges, locks, SS-304 handles, electrical trunk box (1.0mm CRCA), and sockets (Anchor Roma, Norisys, or equivalent).9. Design SpecificationsTable Heights: 900mm for standing and 800mm for sitting.Box Sizes: Range from 450mm to 1400mm in length, 635mm height, 530mm depth.This detailed specification outlines the comprehensive requirements for the laboratory furniture setup, covering structural components, materials, safety features, and electrical installations. The specified materials and hardware ensure durability and functionality suited for a professional pharmacological laboratory environment. Make sure to refer to the laboratory furniture drawings provided by the engineer in charge for further guidance during the installation and commissioning phase. |
| 202 | Providing, Designing,Fabrication, Supply, Erection/ Installation & commission of a complete Pharmacy Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:1. Main Components:1. Standing C-Frames:Dimensions: 705mm L x 880mm H x 30mm D Material: 60x30mm pipe, 2mm thickness Quantity: 9 C-frames with various connecting sets:1 set of 1500mm 4 sets of 1350mm 1 set of 1200mm 1 set of 750mm 2. Storage Units:3 units: 750mm L x 530mm D x 635mm H (1 drawer, 2 shutters)2 units: 600mm L x 530mm D x 635mm H (1 drawer, 2 shutters)2 sink storage units: 600mm L x 530mm D x 635mm H (2 shutters)3. Legspaces:4 legspaces: 750mm wide with back cover plates 2 legspaces: 600mm wide with back cover plates 4.Cover Panels and Space Fillers:4 end cover panels for 750mm counter depth 2 space fillers 5. Sinks and Accessories:2 PP drop-in sinks: 560mm L x 355mm W x 245mm D (with bottle traps and hose pipes)- 2 three-way spouts with swivel swan necks 2 SS-304 pegboards: 500mm x 400mm (with 18 pegs and integrated drain trays) 6. Eye Wash Station:1 two-way eye wash (imported from Broen Denmark/NovaLab Germany or equivalent) 7. Electrical Raceway and Sockets:9 meters of single-sided CRCA electrical raceway (max 2m length) with 3 six-module cut-outs 11 sets of 5A and 15A switches and sockets with faceplates (no wiring)Stools:9 height-adjustable stools with powder-coated pipe frames and SS-202 tops Granite and Packing:8 sqm of pre-polished jet black granite with chamfered corners 32 meters of neoprene underneath packing for granite installation Materials and Specifications: Epoxy Powder Coated CRCA Sheet:Used for hanging storage (100% epoxy powder-coated)Drawer fronts, shutter fronts, and top stiffener: 1.2mm thickness Shutters and drawers: Sandwich construction Panels, back, bottom, and drawer body: 0.8mm thickness C-Frame Construction:60 x 30 mm pipe with 2mm thickness Connecting sets at least 2.5mm thick Table and Counter Heights: Standing table height: 900mm Sitting table height: 800mm Hardware: Hettich telescopic channels, hinges, locks, and SS-304 handles Electrical trunk box: 1.0mm thick CRCA Sockets: Anchor Roma, Norisys, or equivalent brands for durability and quality Notes:All hanging storage units are made with 100% epoxy powder-coated CRCA sheet as per IS: 513 (1994).The furniture will be installed according to the layout plan provided, with reference to laboratory furniture drawings.The hardware used is sourced from trusted brands ensuring reliability and long-term durability.This comprehensive package includes all the necessary elements for a fully functional and well-equipped pharmacy laboratory, with attention to durability, quality materials, and proper ergonomic design. |
| 203 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Research Laboratory Furniture as per the approved layout plan. The scope of work includes the following components:1. C-Frames (Standing Structures):16 units, each measuring 705mm L x 880mm H x 30mm D. Made of 60x30mm pipe with a thickness of 2mm.Includes connecting sets:12 sets of 1500mm 1 set of 600mm.2. Legspaces:10 units, each 750mm wide with back cover plates.3. Storage Units:14 Storage Units:Dimensions: 750mm L x 530mm D x 635mm H.Each unit has 1 drawer and 2 shutters.4. Sink Storage Unit: Dimensions: 600mm L x 530mm D x 635mm H with 2 shutters.5. Additional Furniture Components:End Cover Panels:6 units for 750mm counter depth with standing height.Space Fillers:3 units.Height-Adjustable Stools:9 units with powder-coated pipe frames and SS-202 tops.7. Plumbing and Electrical Components:Sink:1 PP drop-in sink (560mm L x 355mm W x 245mm D) with bottle trap and hose pipe.1 three-way spout with a swivel swan neck.1 SS-304 pegboard (500mm x 400mm) with 18 pegs and an integrated drain tray.Eye Wash:1 two-way eye wash (imported from Broen Denmark, NovaLab Germany, or equivalent).Electrical Raceway:6 meters of single-sided CRCA with 3 six-module cut-outs.2 upright Regent shelves (1500mm L x 300mm D x 750mm H) with an integrated raceway.11 sets of switches and sockets (5A and 15A) with faceplates (no wiring).8. Granite and Packing:Granite:8 sqm of pre-polished jet black granite with chamfered corners.32 meters of neoprene packing for granite.9. Material Specifications:Epoxy Powder Coated CRCA Sheet used for construction as per IS: 513 (1994).Thickness Specifications:Drawer fronts, shutter fronts, and top stiffener: 1.2mm thick.Shutters and drawers: sandwich construction.LH/RH panels, back, bottom, drawer body, and backs: 0.8mm thick.C-Frame: 60x30mm with 2mm thickness. Connecting sets: 2.5mm thick.10.Table Heights: 900mm standing and 800mm sitting.11. Hardware:Hettich telescopic channels, hinges, locks, and SS-304 handles.Electrical trunk box made of 1.0mm thick CRCA. Sockets from Anchor Roma, Norisys, or equivalent brands.12. Compliance and Quality:All components must adhere to high durability standards, with quality materials and professional-grade hardware, ensuring longevity and reliability in a research environment.his breakdown should help in understanding the complexity and scope of the laboratory furniture project, and ensure all components are accounted for. |
| 204 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete PSM Laboratory Furniture aas per the approved layout plan. The scope of work includes the following components:1. C-Frames: 33 standing C-frames (705mm L x 880mm H x 30mm D) made from 60x30mm pipes with 2mm thickness.2. Connecting Sets: 21 sets of 1500mm, 2 sets of 1350mm, and 4 sets of 600mm for standing C-frame structures.3.Storage Units: 16 storage units (750mm L x 530mm D x 635mm H) with drawers and shutters, 9 sink storage units (750mm L x 530mm D x 635mm H) with shutters, and 3 smaller storage units (600mm L x 530mm D x 635mm H).4.Additional Items:3 sink storage units (600mm L x 530mm D x 635mm H).19 legspaces (750mm wide with back cover plates).12 end cover panels (750mm counter depth).6 space fillers.12 PP drop-in sinks (560mm L x 355mm W x 245mm D) with accessories.12 three-way spouts, 12 SS-304 pegboards with integrated drain trays.2 two-way eye washes (imported).30 meters of single-sided CRCA electrical raceway.5.Electrical items include 38 sets of 5A and 15A switches and sockets.6.Stools: 38 height-adjustable stools with SS-202 tops and powder-coated pipe frames.7.Granite: 30 sqm of pre-polished jet black granite with chamfered corners.8.Packing: 120 meters of neoprene for granite packing.The furniture is made from 100% Epoxy Powder Coated CRCA Sheet (IS: 513), with varying thicknesses (1.2mm for drawer fronts and top stiffeners, 0.8mm for panels and backs). The C-frame and connecting sets have specific thicknesses, and various sizes are available for storage boxes and tables (heights of 900mm standing and 800mm sitting). Hardware includes Hettich telescopic channels, hinges, locks, and SS-304 handles. Electrical components are durable, sourced from reputable brands.This project is comprehensive, covering all aspects of laboratory furniture design and installation per the provided drawings. |
| 205 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Disscetion Hall Furniture as per the approved layout plan. The scope of work includes the following components: 1. Lockers:10 full-size lockers (1980mm x 910mm x 480mm), each with 12 compartments.Constructed from 0.8mm thick CRCA sheet, epoxy powder-coated.Features include cam locks with keys, recessed handles, louvers for ventilation, and a knock-down construction.2. Stools:120 height-adjustable stools with powder-coated pipe frames and SS-202 tops.3. Dissection Tables:20 tables, each 2100mm (L) x 900mm (D) x 900mm (H).4. Materials & Construction:All hanging storage units are made from 100% epoxy powder-coated CRCA sheet (IS: 513 1994).Drawer and shutter fronts, and top stiffeners are 1.2mm thick; panels and backs are 0.8mm thick.C-frame is 60x30mm with 2mm thickness, connecting sets are at least 2.5mm thick.Box sizes range from 450mm to 1400mm in length, 635mm in height, and 530mm in depth.Table heights are 900mm standing and 800mm sitting.5.Hardware:Hettich telescopic channels, hinges, locks, and SS-304 handles. Electrical trunk box made from 1.0mm thick CRCA sheet, with sockets from Anchor Roma, Norisys, or equivalent brands.All components are designed to meet specific standards for durability, functionality, and ease of installation as per the Engineer Incharge\"s directions. |
| 206 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Histology Laboratory Furniture as per the approved layout plan. The scope of work includes the following components: 1. Standing Frames: 69 units of L-705 x H-880 x D-30 mm, made from 60x30 mm pipes with 2 mm thickness.2. Connecting Sets: Various lengths for C-frame structures:44 units of L-1500 mm 6 units of L-1350 mm 2 units of L-1200 mm 4 units of L-750 mm 3 units of L-600 mm 3. Storage Units:40 units of L-750xD-530xH-635 mm with 1 drawer and 2 shutters 33 units of L-750xD-530xH-635 mm with 2 shutters 10 units of L-600xD-530xH-635 mm with 1 drawer and 2 shutters 2 units of sink storage4.Additional Components: Leg spaces, end cover panels, space fillers 35 PP drop-in sinks, 35 three-way spouts 20 pegboards and 1 imported 2-way eye wash 5.Reagent Shelves: 13 units of L-1500 x D-300 x H-750 mm 10 units of L-750 x D-300 x H-750 mm 2 units of L-600 x D-150 x H-750 mm 3 units of L-1350 x D-150 x H-750 mm 6.Electrical Components:52 sets of 5A & 15A switches and sockets 74 height-adjustable stools7.Other Materials:65 sqm of prepolished jet black granite 260 meters of underneath packing for the granite8.Construction Details:Furniture constructed with 100% Epoxy Powder Coated CRCA Sheet (IS: 513, 1994)Drawer fronts, shutter fronts, and top stiffener are 1.2 mm thick The C-frame is 60 x 30 mm with 2 mm thickness Hardware includes Hettich telescopic channels, hinges, locks, and SS-304 handles Electrical trunk box is 1.0 mm thick CRCA, with durable sockets from reputable brands (Anchor Roma, Norisys, or equivalent).The furniture will be fabricated and assembled as per the provided laboratory layout and specifications. |
| 207 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Histo Prep RMB Laboratory Furniture as per the approved layout plan. The scope of work includes the following components: C-Frames: 6 standing C-frames (L-705 x H-880 x D-30 mm) made from 60x30mm pipes with 2mm thickness.Connecting Sets:1 set (L-1500 mm)2 sets (L-1200 mm)1 set (L-850 mm)1 set (L-750 mm)Storage Units:1 corner storage unit (L-850+850 x D-530 x H-635 mm) with 1 shutter 2 units (L-750 x D-530 x H-635 mm) with 1 drawer and 2 shutters 1 sink storage unit (L-750 x D-530 x H-635 mm) with 2 shutters 3 units (L-600 x D-530 x H-635 mm) with 1 drawer and 2 shutters Other Components:1 unit of 600mm leg space with back cover 2 end cover panels for 750mm counter depth 2 space fillers Plumbing components including 1 PP drop-in sink with bottle trap and hose, 1 three-way spout with swivel neck Electrical Setup: 7 meters of CRCA electrical raceway with 3 module cut-outs 9 sets of 5A and 15A switches and sockets with faceplates Additional Items:7 height-adjustable stools with powder-coated pipe frames and SS-202 tops5 sqm of pre-polished jet black granite with chamfered corners 20 meters of neoprene packing for the granite Materials & Specifications:Furniture made of 100% Epoxy Powder Coated CRCA Sheet (IS: 513, 1994)Drawer fronts, shutter fronts, and top stiffener: 1.2 mm thick Shutters and drawers with sandwich construction C-frame: 60x30 mm, 2mm thick Hardware: Hettich telescopic channels, hinges, locks, and SS-304 handles Electrical trunk box: 1.0 mm thick CRCA Sockets: Anchor Roma, Norisys, or equivalent brands.Table and unit heights are 900 mm standing and 800 mm sitting, with varying box sizes ranging from 450 mm to 1400 mm in length and 635 mm height. |
| 208 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Research Laboratory Furniture as per layout plan The scope of work includes the following components:1. C-Frames: 10 standing C-frames (L-705 x H-880 x D-30 mm) made from 60x30mm pipes with 2mm thickness, with 8 connecting sets of L-1500 mm.2. Storage Units: 8 units (L-750 x D-530 x H-635 mm) with 1 drawer and 2 shutters, and 2 units (L-750 x D-530 x H-635 mm) with 2 shutters.3.Leg Spaces and End Panels: 6 leg spaces (750 mm with back cover plate) and 2 end cover panels for 750 mm counter depth. 4. Additional Components: 2 PP drop-in sinks with bottle traps, 2 three-way spouts, 1 imported 2-way eye wash, and 2 SS-304 pegboards with integrated drain trays.5. Electrical Setup: 12 meters of CRCA electrical raceway, 16 sets of switches and sockets (5A and 15A), and necessary faceplates.6. Stools: 14 height-adjustable stools with powder-coated pipe frames and SS-202 tops.7.Granite: 10 sqm of pre-polished jet black granite with chamfered corners.8. Neoprene Packing: 40 meters of neoprene packing for granite.9. Construction Material: The furniture is made of 100% Epoxy Powder Coated CRCA Sheet, with various thicknesses for different parts. The drawer and shutter fronts have 1.2 mm thickness, and the internal panels are 0.8 mm thick.10.Table Heights: 900 mm for standing and 800 mm for sitting tables.11. Hardware: High-quality Hettich telescopic channels, hinges, locks, SS-304 handles, and CRCA electrical trunk boxes.The project will be completed as directed by the engineer in charge and based on laboratory furniture drawings. All components meet relevant standards for durability and quality. |
| 209 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Leptospira Laboratory Furniture as per layout plan .The scope of work includes the following components: Standing C-Frames: 3 units, each 705mm (L) x 880mm (H) x 30mm (D), made from 60x30mm pipes with 2mm thickness. Includes 1 connecting set of 1500mm and 1 set of 1350mm for the C-frame structure.Storage Units:1 unit (750x530x635 mm) with 1 drawer and 2 shutters.1 unit (750x530x635 mm) with 2 shutters.1 unit (600x530x635 mm) with 1 drawer and 2 shutters.Additional Components:1 leg space with back cover plate (750mm).2 end cover panels for 750mm counter depth.1 space filler.Utility Fixtures:1 PP drop-in sink with bottle trap and hose.1 three-way spout with swivel swan neck.1 SS-304 pegboard (500x400mm) with integrated drain tray.1 imported 2-way eye wash.Electrical Components:2 meters of single-sided CRCA electrical raceway with 3 module cut-outs.3 sets of 5A and 15A switches and sockets with face plates.Full-Height Storage Units: 3 units (1980mm H x 910mm W x 480mm D) with glass shutters, snap-shut locking, and 4 shelves, made from 0.8mm CRCA sheet with epoxy powder coating.Granite Work: 2.5 sqm of pre-polished jet black granite with chamfered corners, and 10 meters of neoprene packing for the granite.Material Specifications:Epoxy powder-coated CRCA sheet as per IS: 513 (1994).Drawer fronts, shutter fronts, and top stiffeners are 1.2mm thick; panels, backs, and drawers are 0.8mm thick.C-frame is 60x30mm with 2mm thickness, and connecting sets are at least 2.5mm thick.Hardware includes Hettich telescopic channels, hinges, locks, SS-304 handles.Electrical trunk box is made from 1mm thick CRCA, and the sockets are from Anchor Roma, Norisys, or equivalent brands.Dimensions and Construction:Box sizes range from 450mm to 1400mm in length, with a height of 635mm and depth of 530mm.Table heights are 900mm standing and 800mm sitting.All furniture is designed per the laboratory layout plan and engineered specifications, using durable materials for long-lasting performance. |
| 210 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete PCR Room Furniture as per layout planThe scope of work includes the following components:C-Frames: 7 sitting.C-frames (L-705 x H-775 x D-30 mm) made from 60x30mm pipes with 2mm thickness, along with various connecting sets in different sizes for sitting height.Storage Units:1 corner unit (L-850+850 x D-530 x H-635 mm) with 1 shutter.3 units (L-750xD-530xH-635 mm) with 1 drawer and 2 shutters.3 units (L-600xD-530xH-635 mm) with 1 drawer and 2 shutters.Additional Furniture:1 leg space (750 mm with back cover plate).2 end cover panels for 900mm counter depth with sitting height.3 space fillers.Electrical System:7.meters of single-sided CRCA electrical raceway with 3 module cut-outs.10 sets of 5A and 15A switches and sockets with face plates.Granite Work:7 sqm of pre-polished jet black granite with chamfered corners.28 meters of neoprene packing for the granite.Material Specifications:All hanging storage units are made from 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Drawer fronts, shutter fronts, and top stiffener are 1.2 mm thick, with sandwich construction for drawers and shutters.Other panels and components vary in thickness (0.8mm to 2mm).Hardware includes Hettich telescopic channels, hinges, locks, and SS-304 handles.Electrical trunk box is 1.0 mm thick CRCA, with sockets from reputed brands (Anchor Roma, Norisys).The project ensures durable, high-quality laboratory furniture with specific dimensions, materials, and hardware for a PCR room as per engineer specifications and drawings. |
| 211 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete RNA EXTRACTION Room Furniture as per layout planThe scope of work includes the following components:C-frames: Made from 60x30mm pipe (2mm thickness), with connecting sets of various sizes for seating.Storage Units:1 corner unit (850x850 mm) with 1 shutter.2 units (750x530x635 mm) with 1 drawer and 2 shutters.1 unit (750x530x635 mm) with 2 shutters for sink storage.3 units (600x530x635 mm) with 1 drawer and 2 shutters.Other Components:1 leg space unit (750mm) with back cover plate.1 leg space unit (600mm) with back cover plate.2 end cover panels for 900mm counter depth.2 space fillers.Additional Items:PP drop-in sink with bottle trap and hose.Three-way spout with swivel neck.SS-304 pegboard with 18 pegs.Two-way eye wash.6 meters of electrical raceway (single-sided CRCA) with 3 module cut-outs.8 sets of switches and sockets (5A and 15A).7.5 sqm pre-polished black granite with chamfered corners.30 meters of neoprene packing for granite installation.The furniture is made from 100% Epoxy Powder Coated CRCA Sheet, with specific material thicknesses (1.2 mm for drawer and shutter fronts, 0.8 mm for panels). Table heights are 900 mm standing and 800 mm sitting. Hardware includes Hettich telescopic channels, hinges, locks, and SS-304 handles. Electrical components are from recognized brands (Anchor Roma, Norisys, etc.), ensuring quality and durability. |
| 212 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Sample Addition Labrotory. Furniture as per layout plan consist of following components:C-frames (3 units): Dimensions of 705mm (L) x 775mm (H) x 30mm (D), made from 60x30mm pipes with 2mm thickness.Connecting sets (2 units): L-1200mm for sitting-height C-frame structures.Storage units (3 units): L-600mm x D-530mm x H-635mm, each with 1 drawer and 2 shutters, and 1 legspace with a back cover plate (600mm).Additional components:2 end cover panels for 750mm counter depth with sitting height.2 space fillers.2 meters of single-sided CRCA electrical raceway (L-2m, H-125 x D-75mm) with 3 module cut-outs.3 sets of 5A and 15A switches and sockets with face plates.2 sqm of pre-polished jet black granite with chamfered corners.8 meters of underneath neoprene packing for granite.Materials and Construction:Epoxy Powder Coated CRCA Sheet (IS: 513, 1994).Drawer and shutter fronts, and top stiffener: 1.2mm thick.Shutters and drawers: Sandwich construction.Panels, backs, bottoms, and drawer bodies: 0.8mm thick.C-frame: 60x30mm, 2mm thick; Connecting sets: At least 2.5mm thick.Dimensions:Box sizes: 450mm to 1400mm (L), 635mm (H), 530mm(D).Table height: 900mm standing, 800mm sitting.Hardware:Hettich telescopic channels, hinges, locks, SS-304 handles.Electrical trunk box: 1mm thick CRCA.Sockets from Anchor Roma, Norisys, or equivalent brands.This furniture is designed for durability, functionality, and aesthetic quality in a laboratory setting. |
| 213 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Exraction Room Furniture as per layout plan consist of following components: 1. C-Frames (L-705 x H-775 x D-30 mm) made from 60x30 mm pipes with 2 mm thickness, along with two connecting sets of L-1200 mm and one set of L-600 mm for sitting height.2.Storage Units: Two storage units (L-600 x D-530 x H-635 mm) with 1 drawer and 2 shutters, and one sink storage unit (L-600 x D-530 x H-635 mm) with 2 shutters.3.Leg Spaces & End Panels: Two leg spaces (600 mm with back cover plate), two end cover panels for 900 mm counter depth, and one space filler.4.Sink & Fixtures: PP drop-in sink (L-560 x W-355 x D-245 mm) with bottle-trap and hose pipe, a three-way spout with a swivel swan neck, and an SS-304 pegboard (500 x 400 mm) with an integrated drain tray.5.Eye Wash & Electrical Setup: Imported 2-way eye wash, 2 meters of CRCA electrical raceway (L-2m, H-125 x D-75 mm) with 3 module cut-outs, and 3 sets of 5A & 15A switches and sockets with faceplates.6.Granite: 3 sqm of pre-polished jet black granite with chamfered corners and 12 meters of neoprene packing for granite.7.Materials & Construction: Furniture made from 100% Epoxy Powder Coated CRCA Sheet (IS: 513 standard). Drawer fronts, shutter fronts, and top stiffeners are 1.2 mm thick. Other components, including C-frames and connecting sets, use CRCA steel with thicknesses of 0.8 mm to 2.5 mm.The furniture is designed for durability, with high-quality materials and hardware, including Hettich telescopic channels, SS-304 handles, and durable electrical components from Anchor Roma, Norisys, or equivalent brands. |
| 214 | Providing, Designing, Fabrication, supply,erecting/ installation, and commissioning of a complete DNA PCR Laboratory Furniture setup based on a specified layout.The scope of work includes the following components:1.C-Frames: Three sitting C-frames (L-705 x H-775 x D-30 mm) made of 60x30 mm pipes with 2 mm thickness, connected by two L-1200 mm sets for sitting height.2.Storage Units: Two storage units (L-600 x D-530 x H-635 mm) with 1 drawer and 2 shutters, and one sink storage unit (L-600 x D-530 x H-635 mm) with 2 shutters.3.Leg Space & End Panels: One leg space (600 mm with back cover plate) and two end cover panels for 900mm counter depth.4.Sink & Fixtures: PP drop-in sink (L-560 x W-355 x D-245 mm) with accessories, a 3-way spout, and an SS-304 pegboard (500 x 400 mm) with 18 pegs and a drain tray.5.Electrical Components: One imported 2-way eye wash, 2 meters of CRCA electrical raceway (L-2m, H-125 x D-75 mm) with 3 module cut-outs, and 3 sets of 5A and 15A switches and sockets.6.Granite: 2.5 sqm of pre-polished jet black granite (17±1 mm thick with chamfered corners) and neoprene packing for granite.7.Construction Materials: Furniture made from 100% Epoxy Powder Coated CRCA Sheet (IS: 513 standard). Drawer fronts, shutter fronts, and top stiffeners are 1.2 mm thick, with sandwich construction for drawers and shutters. Other panels, including the C-frame, are made from CRCA steel with thickness ranging from 0.8 mm to 2 mm.The furniture is designed for durability and functionality, using high-quality materials and hardware, including Hettich telescopic channels, SS-304 handles, and durable sockets. |
| 215 | Providing, designing, fabricating, supplying, erecting/ installing, and commissioning complete SEROLOGY Laboratory furniture as per layout plan The scope of work includes the following components:1.C-Frame Structures:5 standing C-frames (705mm L x 880mm H x 30mm D) made of 60x30mm pipes (2mm Thickness).4 connecting sets of 1200mm length for the standing height C-frame structures.Storage Units:4 units (600mm L x 530mm D x 635mm H) with 1 drawer and 2 shutters.1 sink storage unit (600mm L x 530mm D x 635mm H) with 2 shutters.Leg Spaces:3 leg spaces (600mm L) with back cover plates.2 end cover panels for 900mm counter depth (standing height).Other Items:1 space filler.1 PP drop-in sink (560mm L x 355mm W x 245mm D) with sink outlet nipple, bottle trap, hose pipe, and 1 three-way spout with a swivel swan neck.1 SS-304 pegboard (500mm L x 400mm W) with 18 pegs and integrated drain tray.1 imported 2-way eye wash.Electrical Raceway:4 meters of single-sided CRCA electrical raceway (L-2m, H-125mm, D-75mm) with 3 module cut-outs.6 sets of 5A and 15A switches and sockets with faceplates.Granite Support & Granite:4.6 meters of standing height granite support (300mm to 1000mm L, 300mm D, 875mm H) made with 30x30mm pipes.5 sqm of pre-polished jet black granite (17±1mm thick) with chamfered corners.20 meters of neoprene packing for granite.Materials & Construction:Material: 100% Epoxy Powder Coated CRCA Sheet (IS: 513, 1994).Thickness:Drawer fronts, shutter fronts, and top stiffener: 1.2mm thick.Shutters and drawers: Sandwich construction.LH/RH panels, back, bottom, drawer body, and backs: 0.8mm thick.C-Frame: 60x30mm, 2mm thick.Connecting sets: At least 2.5mm thick.Dimensions:Box Sizes: Length (450mm to 1400mm), Height (635mm), Depth (530mm).Table Heights: Standing (900mm), Sitting (800mm).Hardware:Components: Hettich telescopic channels, hinges, locks, SS-304 handles.Electrical:Trunk box made from 1.0mm thick CRCA sheet,sockets from Anchor Roma,Norisys,or equivalent brands. |
| 216 | Providing, Designing, Fabrication, Supply, Erection/ Installation & commission of a complete Sample Collection Labortory Furniture as per layout plan The scope of work includes the following components: 1. C-Frame Structures: 4 standing C-frames (L-705 x H-880 x D-30 mm), made from 60x30mm pipes with a 2mm thickness. 2 connecting sets of L-1350 mm and 1 connecting set of L-750 mm for standing height C-frame structures. 2. Storage Units: 2 storage units (L-750 x D-530 x H-635 mm) with 1 drawer and 2 shutters each. 1 storage unit (L-600 x D-530 x H-635 mm) with 1 drawer and 2 shutters. 3. Leg Spaces: 1 legspace of 750 mm with a back cover plate. 1 legspace of 600 mm with a back cover plate. 4. End Cover Panels: 2 end cover panels for 750mm counter depth with standing height. 5. Additional Components: 1 space filler. 4 meters of single-sided CRCA electrical raceway (L-2m, H-125 x D-75 mm) with 3-module cut-outs. 5 sets of 5A and 15A switches and sockets with faceplates (without wiring). 6. Storage Units with Glass Shutters: 2 full-height storage units (H-1980 x W-910 x D-480 mm) with glass shutters, featuring 4 shelves and 5 compartments with snap-shut locking systems.7. Open-Type Storage Rack: 1 open-type storage rack (L-910 x D-400 x H-2100 mm) with 6 adjustable shelves.8. Countertops and Accessories:3 sqm of pre-polished jet black granite (17±1 mm thick with chamfered corners). 12 meters of neoprene packing for granite.Specifications:Material: 100% Epoxy Powder Coated CRCA Sheet as per IS: 513 (1994).Thickness: Drawer fronts, shutter fronts, and top stiffener: 1.2 mm.LH/RH panels, back, bottom, drawer body, and backs: 0.8 mm.C-frame: 60 x 30 mm with 2 mm thickness. Connecting sets: At least 2.5 mm thick.Box Sizes: 450 mm to 1400 mm (Length), 635 mm (Height), 530 mm (Depth).Table Heights: 900 mm (standing), 800 mm (sitting).Hardware:Hettich telescopic channels, hinges, locks, and SS-304 handles. Electrical trunk box: 1.0 mm thick CRCA. Electrical sockets: Anchor Roma, Norisys, or equivalent brands.All work to be carried out as per approved laboratory furniture drawings and as directed by the Engineer In-charge, ensuring high durability and functional precision etc complete . |
| 217 | The project involves the design, fabrication, supply, erecting/ installation, and commissioning of a complete Pathology Research laboratory furniture setup as per the given specifications as per the approved layout plan. The scope of work includes the following components:Key Components:Standing C-Frames:Quantity: 17 Dimensions: 705mm (L) x 880mm (H) x 30mm (D)Material: 60x30mm pipes with 2mm thickness Purpose: Structural support for the lab furniture.Connecting Sets: Quantity: 11 sets of 1500mm, 2 sets of 750mm, 1 set of 600mm Purpose: To connect the C-frames and form a complete structure.Storage Units:Quantity: 12 units Dimensions: 750mm (L) x 530mm (D) x 635mm (H) Features: Each storage unit includes 1 drawer and 2 shutters.Special Units:1 sink storage unit with 2 shutters (750mm x 530mm x 635mm).1 smaller storage unit (600mm L x 530mm D x 635mm H) with 1 drawer and 2 shutters.Leg Spaces and Cover Plates:Quantity: 11 leg spaces, each 750mm wide with back cover plates.End Cover Panels: - Quantity: 6 panels for 750mm counter depth.Space Fillers:Quantity: 3 Sink and Plumbing:PP Drop-In Sink:Dimensions: 560mm (L) x 355mm (W) x 245mm (D) Accessories: Includes bottle-trap and hosepipe.Three-Way Spout:Feature: Swivel Swan neck for versatility.SS-304 Pegboard:Dimensions: 500mm x 400mm with integrated drain tray.Eye Wash Station:Q\uantity: 2-way eye wash station.Upright Regent Shelves:Quantity: 2 Dimensions: 1500mm (L) x 300mm (D) x 750mm (H) Feature: 2-tier with integrated raceways. Electrical Raceway:Quantity: 8 meters of single-sided CRCA electrical raceway (max L-2m, H-125mm x D-75mm).Electrical Components:Quantity: 15 sets of 5A and 15A switches and sockets, with faceplates. Stools:Quantity: 24 height-adjustable stools with powder-coated frames and SS-202 tops.Granite and Neoprene Packing:Granite: Quantity: 15 square meters of pre-polished jet black granite with chamfered corners.Neoprene Packing:Quantity: 60 running meters for granite protection.Construction Materials and Specifications:Primary Material: 100% Epoxy Powder Coated CRCA Sheet (IS: 513,1994).Thicknesses:Drawer fronts, shutter fronts, and top stiffener: 1.2mm thick.Shutters and drawers feature sandwich construction for strength. LH/RH panels, back, bottom, drawer body: 0.8mm thick.C-frame: 60x30mm with 2mm thickness.Connecting sets: Minimum 2.5mm thick.Box Sizes: Vary between 450mm to 1400mm in length, with a height of 635mm and depth of 530mm.Table Heights: 900mm standing height and 800mm sitting height.Hardware and Fixtures:Telescopic Channels: Hettich channels for smooth drawer movement. Hinges, Locks, and Handles: SS-304 for durability and resistance to corrosion.Electrical Trunk Box: 1.0mm thick CRCA sheet.Sockets: Anchor Roma, Norisys, or equivalent brands, ensuring long-term durability and reliability.Final Installation:Location: As per the laboratory layout and final design approved by the engineer in charge.Finish: All components will be finished as per the design specifications to ensure functional and aesthetic coherence in the laboratory.This detailed description outlines the full scope of the pathology research laboratory furniture, ensuring it meets the required standards and specifications for practical use in a professional research environment. |
| 218 | Providing and fixing on walls / ceiling / floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 219 | Providing and fixing on walls / ceiling / floor 40mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. BD.V 5 page551 and as directed by Engineer in charge |
| 220 | Providing and fixing on walls/ceiling/floor 50mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. BD.V 5 page551 and as directed by Engineer in charge |
| 221 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge - 75mm dia |
| 222 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge - 100mm dia |
| 223 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite/ gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) |
| 224 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 8mm diaexpansion hold fasteners including drilling necessary holes in brickwall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x8mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single 100mm dia pipe). |
| 225 | Total bracket length 810mm of approved shape and design (for two 100mm dia pipes) |
| 226 | Total bracket length 1040mm of approved shape and design (for two 100mm dia pipes) |
| 227 | Supplying, laying, jointing & testing UPVC Drainage pipes of FoamcoreAstral(SN 8) or equivalent make in solvent cement joint including leveling with cutting the pipe to required length, roughining of pipe at wall joint including socket as directed: 200 mm pipe |
| 228 | Providing and fixing on walls/ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 229 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 230 | Providing and fixing on walls/ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 231 | Providing and fixing on walls/ceiling/floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 232 | Providing and fixing on walls/ceiling/floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge |
| 233 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. - 50 mm nominal outer dia Pipes |
| 234 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. - 62.50 mm nominal outer dia Pipes |
| 235 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. - 75 mm nominal outer dia Pipes |
| 236 | Providing and fixing Ball valve (20 mm dia) |
| 237 | Providing and fixing Ball valve (25 mm dia) |
| 238 | Providing and fixing Ball valve (32mm dia) |
| 239 | Providing and fixing Ball valve (40mm dia) |
| 240 | Providing and fixing Ball valve (50mm dia) |
| 241 | Providing and fixing Ball valve (63mm dia) |
| 242 | Providing and fixing Ball valve (75mm dia) |
| 243 | Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete (40mm dia) |
| 244 | Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete (50mm dia) |
| 245 | Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete (80mm dia) |
| 246 | Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre rope or tape/videoflex 32 mm as directed by Engineer in charge. |
| 247 | Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre rope or tape/videoflex 25 mm as directed by Engineer in charge. |
| 248 | Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre rope or tape/videoflex 15 mm as directed by Engineer in charge. |
| 249 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 9.375 kW/ 12.5 HP with discharge 1320/600 lpm for head of 25/52 m and 80 mm suction/65 mm delivery pipe on provided CC foundation as per specification no. WP-CGP. |
| 250 | Supply, laying , testing & commissioning of Testing and Commissioning of White Vitereous China Floor mounting / Wall Mounted type European Water Closet with C.P. bolts, nuts, C.I. chair (painted with two coat of enamel paint over a coat of primer) or other hanging arrangement, built in concealedlow volume compatiable cistern with C.P. bolts, nuts supporting arrangements, bakelite / polypropylene seat & cover with C.P. hinges & rubber buffers, complete with all accesories. Including cutting & making good the walls & floor whereever required. |
| 251 | Providing and size fixing white wash basin with half pedestal of 515mmX615mmX460mm including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including S.S. bottle trap of necessary pipe connection upto the outside face of the wall. |
| 252 | Providing, installing, testing and commissioning of infra-red sensor controlled battery operated automatic faucet for wash basin comprising light sensing device and solenoid valve of approved make including cutting and making good the walls and floors as requiredshall got approved from the Engineer In Charge.) |
| 253 | Providing and fixingC.P. Angular stop clock with wall flange Jaquar make or equivalentcontinental ( for geyser including necessary sockets/union nut etc. complete. |
| 254 | Providingand fixingwhiteglazedurinal of size 710x460x300mmwith sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. |
| 255 | Providing, fixing and commissioning wall Concealed WC Flushing Cistern with duel Flushing Actuator Plate (of approved finish), cutting and making good the walls including making connection with WC Pan, all Manufacturer`s specifications, of the following make and type:(or equal approved) |
| 256 | Providing and fixing stainless steel sink 600 mm x 450 mm and 200mmdeep including 32mm dia. galvanised iron waste pipe, 32mm dia. C.P.brass waste coupling, one C.P. brass screw down tap, caste ironbrackets, rubber plugs with chain etc. complete. |
| 257 | Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make) |
| 258 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 5 mm nominal bore |
| 259 | Providing & fixing 2-way Bib cock JAQUAR MAKE, ORNAMIX Model No. 10041etc. Complete |
| 260 | 75 mm C.I nahani trap with grating with 75 mm C.I. bend with cleaning caps fixed compleate |
| 261 | Supplying & Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4.d) 200 mm (8\") dia. |
| 262 | Providing and fixing Health Faucet with one metre long easy flex tube in chrome finish and wall flange |
| 263 | Providing and fixing JAQUAR MAKE,HOTELIER series Model No. 1551 Toilet Paper Holder Recessed type (S.Steel) including cutting and making goodthe wall wherever required etc complete |
| 264 | Providing and fixing GLITTERS MAKE, SLOPE sereis Towel Rack etc complete |
| 265 | Providing & fixing stainless steel 20 mm dia,600 mm long grab bar for physicaly handicapped toilet etc complete as directed. |
| 266 | Providing supplying and installing Hand dryer; an electric machine which makes use of heating element and an air blower to dry the hands after hand washing in 10-12 sec of approved brand/ make such as jaqyar, Dyson, perk, Dolfy having Input voltage/ Frequency:120- 127V 50 and 60 Hz Rated power: 1400 W, Motor type: Dyson digital motor V4- brushless DC Motor, Motor switching rate: 6,100 per second, Motor speed: 92000 rpm, Operating temperature range: 32° - 104°F as directed by engineer in charge etc.complete. |
| 267 | Providing and fixing ISI marked make CP brass liquid soap dispensers with CP brass bracket capacity 250 ml. |
| 268 | Providing and fixing heavy ISI marked single lever concealed diverter for bath & shower system Rain shower & its accessories. (Mixer Cat. No. CON- 421 Jaquar make OR consider equivalent make) |
| 269 | Supply,Installation, testing & Commisioning ofC.P. Wall Mixer with provision for Overhead Shower with 115mm Long Bend & Wall flange, including provision of Shower Arm 190 mm Long Heavy Casted Body with alongwith spout and head etc. all complete as per drawings, specifications and direction of the engineer-in-charge. |
| 270 | Providing and fixingsink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmake incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.) |
| 271 | Supply,Installation, testing & Commisioning of approved make cast brass body water meter etc meter 25 mm dia |
| 272 | Supply,Installation, testing & Commisioning of approved make cast brass body water meter etc meter 40 mm dia |
| 273 | Supply,Installation, testing & Commisioning of approved make cast brass body water meter etc meter 50 mm dia |
| 274 | Supply,Installation, testing & Commisioning of approved make cast brass body water meter etc meter 80 mm dia |
| 275 | Providing and laying in trenches 20mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93Kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page One Number 551 |
| 276 | Providing and laying in trenches 25mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 3.01Kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page One Number 551 |
| 277 | Providing and laying in trenches 40mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 4.49Kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page One Number 551 |
| 278 | Providing and laying in trenches 80mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 10.15Kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page One Number 551 |
| 279 | Supplying, erecting, testing and commissioning of concealed quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º Cfixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON Note: To be brought only as spares. To be used if existing sprinklers are damaged. |
| 280 | Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR./UP |
| 281 | Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 700mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP |
| 282 | Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP |
| 283 | Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1200 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP |
| 284 | Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1500 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP |
| 285 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 286 | Supplying and fixing of self expanding, ready to use polyurethane (PU) foam sealant of minimum 750ml bottle, suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles (except hollow core conductors). Sealant shall have minimum 2 hour fire rating, conforming to EN 1366-4:2021 as per specification no FF-FRS. |
| 287 | Supplying and erecting storage type water heater 15 litres capacity having standing loss < 0.381 kWh/24hour/45°C ,high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water& corrosion protection, with minimum 3 safety protections (i.e. thermostat &thermal cutout,multi function valve) complete with 3 core PVC flexible wire leads complete & total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete as per specification no. AP-WH/STWH |
| 288 | Supplying and erecting storage type water heater 25 litres capacity having standing loss < 0.465kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function valve) complete with 3 core PVC flexible wire leads complete & total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete as per specification no. AP-WH/STWH |
| 289 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater /AC system. |
| 290 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater /AC system. |
| 291 | Supplying and erecting 25 mm dia., 2.45 mm min. thickness polyethylenecomposite pipe, conforming to IS 15450 :2004 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD HWP/PCP. |
| 292 | Supplying and erecting 16 mm dia., 1.75 mm min. thickness polyethylene composite pipe, conforming to IS 15450 :2004 duly joined by compression/ crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD-HWP/PCP. |
| 293 | Supplying and erecting 32 mm dia., 2.8 mm min. thickness polyethylenecomposite pipe, conforming to IS 15450 :2004 duly joined bycompression/crimp fitted accessories, with internal as well as external end sealingarrangement for Solar Water Heater System as per specification No. ESD HWP/PCP. |
| 294 | Supplying and erecting 25 mm dia., 2.45 mm min. thickness polyethylene composite pipe, conforming to IS 15450 :2004 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD HWP/PCP. |
| 295 | Supplying and erecting 40 mm dia., 3.4 mm min. thickness polyethylene composite pipe, conforming to IS 15450 :2004 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD HWP/PCP. |
| 296 | Supply & Installation of of Inodized Aluminium Purlins and Stands of 4\" Dia and 0.5 mm Thick for Solar Panels |
| 297 | SITC of 40 mm CPVC pipe with all necessary fitting for cold water supply ti the solar systems |
| 298 | Supply, Installation, Testing and Commissioning of Accessories for Solar Panel:Forged Brass Ball valve - 20 mm dia. |
| 299 | SITC of Bronze horizontal check valve - 20 mm dia. |
| 300 | SITC of bronze Air vent - 20 mm dia |
| 301 | Supply, Installation, Testing and Commissioning of Solar hot water Horizontal primary circulation pump:MOC : CI casing and SS 304 impeller and shaft(1W+1SB) Flow :30,240 LPH |
| 302 | SITC of CI Butterfly Valve - 80 mm |
| 303 | SITC of CI Dual Plate Check Valve - 80 mm |
| 304 | SITC of CI Y type Strainer - 80 mm dia. |
| 305 | Supply, Installation, Testing and Commissioning of Water Softening Plant (FRP) for make-upwater. Water flow - 500 LPH |
| 306 | Supply, installation, testing and commissioning of Soft Water Make up TankCapacity:500 ltrMOC - HDPE |
| 307 | Supply, Installation, Testing and Commissioning of Forged Brass Ball Valve 25 NB |
| 308 | Supply, Installation, Testing and Commissioning of fabricated Vertical Mild Steel Mixing tank with internal Epoxy coating and SS304 calorifier Coil of following specifications:Capacity: 6000 ltrsMax. working pressure: 6 BarCoil Capacity : 61 ,920 kcal/hrEletrical Heating Element- 30 KW ( 15 KW x 2 ). |
| 309 | Supply, Installation, Testing and Commissioning of Hot Water Inlet Bronze Globe Valve - 40 mm |
| 310 | SITC of Bronze horizontal check valve - 40 mm dia. |
| 311 | Supply, Installation, Testing and Commissioning of Hot water inlet & outlet (Primary Side) Bronze Globe Valve - 40 mm |
| 312 | Supply, Installation, Testing and Commissioning of Drain Valve Ball Valve- 40mm |
| 313 | Supply, Installation, Testing and Commissioning of Air Vent - 25 mm |
| 314 | SITC of Bronze Saftey Valve - 25 mm |
| 315 | Supply, Installation, Testing and Commissioning of Temperature Controller with TIC/Temperature Sensor |
| 316 | Supplying and erecting 100 mm dia. Pressure gauge , 0 -300 PSI or 0-14 kg per square fitted with 12 / 15 mm dia. Pad cock valve , erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG |
| 317 | SITC of 100 dia Temperature Gauge 0-1000C |
| 318 | ProvidingInsulation to hot water pipes & fittingsin accordance withspecifications 50 mm thick rockwool 100 Kg / Cu-m density with Al cladding of 26 G. 20 mm dia |
| 319 | ProvidingInsulation to hot water pipes & fittingsin accordance withspecifications 50 mm thick rockwool 100 Kg / Cu-m density with Al cladding of 26 G. 25 mm dia |
| 320 | ProvidingInsulation to hot water pipes & fittingsin accordance withspecifications 50 mm thick rockwool 100 Kg / Cu-m density with Al cladding of 26 G. 40 mm dia |
| 321 | ProvidingInsulation to hot water pipes & fittingsin accordance withspecifications 50 mm thick rockwool 100 Kg / Cu-m density with Al cladding of 26 G. 80 mm dia |
| 322 | Supply, Installation, Testing and Commissioning ofControl panel for system for Solar water circulation pumpwithout PLC Panel rating - Indoor typeSwitch Gear Make - L&T/ABB |
| 323 | SITC of RTD Screen Cable |
| 324 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 325 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 326 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 327 | Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension: 1020 x 846 x 1840 (mm), Input power: 9.4kW, 380 V, 3Ph, 50 Hz, Output power: 36 kW having hot water temperature range 35°C to 60°C and ambient temperature range for max. efficiency 0°C to 43°C, with top throw fan, tube type heat exchanger 5 nos. inbuilt temperature sensor and two pressure sensors shall be display on controller, centrally controlled operation, operational noise level: 65 dBA with provision for controlling auxiliary heater with necessary accessories complete with 5 years ON-SITE warranty as per specification ESD-HP. |
| 328 | Supplying, erecting & marking FP MCB 40A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 329 | Supply, Installation, Testing and Commissiong of Weatherproof MS Enclosure for the above mentioned MCB\"s |
| 330 | SITC of Integration of the Heat Pumps with the Solar Water Heater System complete with all the GI/PVC pipes, valves, flanges, accessories, cables, heating coils, strainers, air release valves, rubber pads etc, complete as per specifications and engineer-in-charge at site |
| 331 | Painting of feeder pillar / switchgear sand frame of panel board with single coat of redoxide & two coats of approved quality enamel paint by scraping existing paint complete. (while calculating square meter area, area of angle iron frame on which the switchgears are erected shall be considered if required) |
| 332 | S & E hot water tap 15 mm with all accessories forged brass metal with ball valve type |
| 333 | Supplying and erecting GI pipe 15mm dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP |
| 334 | Supplying and erecting non return valve 25 mm dia in position made of gun metal complete |
| 335 | Supplying and erecting 25 mm dia. gun metal sluice valve at position with necessary materials complete. |
| 336 | Providing and fixing high-density polyethylene (HDP) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. |
| 337 | Supplying, installing, testing and commissioning of FPC Solar water heating system without heating coil type of 100 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete with 5 years warranty as per specification no. ESD-SHWS-FPC. |
| 338 | Supplying, installing, testing and commissioning of FPC solar water heating system without heating coil type of 300 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete with 5 years warranty as per specification no. ESD-SHWS-FPC. |
| 339 | Supplying, installing, testing and commissioning of FPC solar water heating system without heating coil type of 500 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete with 5 years warranty as per specification no. ESD-SHWS-FPC. |
| 340 | Supplying, installing, testing and commissioning of FPC (16 Nos.)solar water heating system without heat exchanger type, 2000 LPD capacity. 2000 Lit Hot water storage tank should be made of 1.2 mm Stainless Steel, duely insulated with 100 mm Rockwool insluation. Insulation should be tied with chickenmesh, binding wire and then wrapped with Polyethelene sheet including aluminium cladding. FPC should be compliant of latest IS 12933. & flanged Joined. EPDM rubber gasket should be used in between two panels, with nonmagnetic stainless steel nutbolts. Internal pipiline should be 2025 PE-AL-PE pipe and compression fittings. Tank should have a seperate provision for drainage. |
| 341 | Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 5 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2nos. feeder with 2 LBS and 3 nos. feeder with 3 VCB compliant to IEC 62271-100, 200 and 102 as per specification no. SW-HTS/RMU SCADA. |
| 342 | Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound, without gas cushioning, hermetically Sealed transformer, delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%,having 7 number of tap positions with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-HSL. |
| 343 | Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 1000 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound, without gas cushioning, hermetically Sealed transformer, delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with on load tap changer) on load +5 to -15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 2790 Watts at 50% load, 7700 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-HSL. |
| 344 | Making Transformer plinth (1.5x1.5x1.5)min size with necessary excavation in ground with150mm thick M-10 PCC at the bottom and top and 250mm thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12mm thick including watering etc. complete. |
| 345 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 346 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 347 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 348 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 349 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 350 | Providing and erecting Heat shrinkable indoor termination kit for 11 Kv (UE)/ 11 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 351 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 352 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 353 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 11 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 354 | Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 81.90 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 690 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG |
| 355 | Supplying, erecting, testing and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 126.4 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 990 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG |
| 356 | Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for Diesel generating set of above 500 kVA upto 750 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF.Note:- 1) In case of new DG set, if AMF/SYNC panel is to be used in lieu of standard panel, reduce rate of Item No 11-2-1 to 11-2-23 by 10% of rate of new AMF panel/SYNC panel. |
| 357 | Supplying, erecting, testing and commissioning of \"C\" class MS pipe with welded joints etc. as required in following sizes duly painted black with floor directions and MS Supports etc.25 MM Dia |
| 358 | Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV |
| 359 | S & E of Pouring funnel 200 mm dia. |
| 360 | Supplying and fixing hand operated rotary fuel pump. |
| 361 | 300 mm class B.M.S. black pipe with bends & other accessories as required. |
| 362 | 150 mm class B.M.S. black pipe with bends & other accessories as required. |
| 363 | Thermal insulation with 50mm thick rock wool and cladded with 0.6 mm Al. foil for 300mm dia. |
| 364 | Thermal insulation with 50mm thick rock wool and cladded with 0.6 mm Al. foil for 150mm dia. |
| 365 | Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge (C class) 40 mm dia 1.2mtr copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball of size 100mm as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner as per spicification no. EA-LA |
| 366 | Supplying & erecting aviation obstruction light minimum up to 48 watt consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete as per specification No. FG-AV. |
| 367 | Supplying, installing, testing and commissioning air circuit breaker electrical drawout (EDO) type, 650V, 1600A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA, (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-ACBNote: For electrical drawout type ACB for item no from 5-8-6 to 5-8-9 increase rates by 15% |
| 368 | Supplying, installing, testing and commissioning air circuit breaker manual drawout (MDO) type, 650V, 1600A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA, (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breakerdisplay on provided iron frame as per specification no. SW-ACB |
| 369 | Supplying, installing, testing and commissioning air circuit breaker electrical drawout (EDO) type, 650V, 1250A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-ACBNote: For electrical drawout type ACB for item no from 5-8-6 to 5-8-9 increase rates by 15% |
| 370 | Supplying, installing, testing and commissioning air circuit breaker electrical drawout (EDO) type, 650V, 1000A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close indication, individual fault trip indication, indications for alarm and trip, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-ACBNote: For electrical drawout type ACB for item no from 5-8-6 to 5-8-9 increase rates by 15% |
| 371 | Supplying, installing, testing and commissioning air circuit breaker electrical drawout (EDO) type, 650V, upto 800A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s),with standard accessories and with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Microprocesser based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-ACBNote: For electrical drawout type ACB for item no from 5-8-6 to 5-8-9 increase rates by 15% |
| 372 | Supplying, erecting & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD |
| 373 | Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5, 3x240V, 50 Hz with optical & RS 232 port, backlit LCD, measures & displays trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & testcertificate from manufacturer erected on provided M.S. box and connected to CTs. |
| 374 | Supplying and erecting intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle,interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. |
| 375 | Supplying and erecting AC three phase four wire Multifunction Energy Meter of rating 10 - 60A, Class 1.0 with din rail / panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THDi, with RS 485 Communication port . Electrical parameters shall beavailable on com port with their mapping address open for third party software |
| 376 | Supplying, Installation, Testing and Commissioning of Earth Leakage Relay suitable for mounting in LT Panel on the Incomer/Outgoing Feeder |
| 377 | Supplying, erecting, testing & commisioning LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with testcertificates. |
| 378 | Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panelcomplete with calibration certificate from manufacturer. |
| 379 | Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibrationcertificate from manufacturer. |
| 380 | Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box/panel and duly connecting with necessary PVC wire leads and lugs. |
| 381 | Supply, Installation, Testing and Commissioning of the \"ON\" Delay Timer 0-60sec range to reset on power interruption, DIN Rail mounted, Power ON, Relay ON with LED Indication. |
| 382 | Supply, Installation, Testing and Commissioning of 4A Aux Contactor 2NO+2NC contacts for AC Control std. coil voltage - 24, 110, 240, 415V, 50Hz conforming of IS 60947-4-1. |
| 383 | Supply, Installation, Testing and Commissioning of 4A Control Cylindrical Fuse links type HF 80kA, with fuse holder & base suitable for cylindrical fuse-links (HCO). |
| 384 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note: - 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 385 | Supplying, Instalation, Testing and Commissioning of Phase Reversal Relays on the Incomer to prevent cross phase connection suitable for mounting in LT Panel. Hooter, Indication Lamp and Push Button on the same will be covered in separate item. |
| 386 | Supply, Installation, Testing and Commissioning of Panel Mounted Hooter for PRR |
| 387 | Supplying, Instalation, Testing and Commissioning of Panel Mounted Push Button flush with the outer surface, with label denoting the purpose of the button and complete with all necessary accessories to operate the push button. |
| 388 | Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 389 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 390 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. |
| 391 | Supplying, erecting, testing & commisioning 250 kVAr, 3 phase, 50 Hz., APFC Panel with derated power contactor of suitable rating for capacitor switching Application for each step controlled by microprocessor based APFC relay consisting of 2, 3, 5, 10, 10, 20, 25, 25, 50, 50, 50 or suitable steps of MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with detuned aluminium wound reactor of 7/ 14% for each step, APFC Panel shall suitable rating MCCB as incomer and each branch/step shall have separate isolation with MCCB/MCB of Suitable rating for protection, compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP-ED/APFC. |
| 392 | Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu), adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB Note:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. 2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 393 | Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 394 | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu), adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withst and capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. 2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 395 | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withst and capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 396 | Providing & erecting 4 Pole MCCB 415V, 320A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 397 | Providing & erecting 4 Pole MCCB 415V, 320A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 398 | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 399 | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 400 | Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 401 | Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 402 | Providing & erecting 4 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no lineload bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 403 | Providing & erecting 4 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no lineload bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 404 | Providing & erecting 4 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable microporcessor based with LSIG (overload, short circuit, instantaneous, earth fault) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.2) In case of specialised application, MCCB used at incomer level shall be microprocessor based with LSIG (overload, short circuit, instantaneous, earth fault) inbuilt protection and shall have door mounted display to ensure close door operation; increase the rate by 20%. |
| 405 | Providing & erecting 4 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCBNote:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 406 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB. |
| 407 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopicrod suitable for above 250A upto 630A MCCB. |
| 408 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 630A upto 800A MCCB. |
| 409 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 100A MCCB (Set of 8) |
| 410 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 250A MCCB (Set of 8) |
| 411 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 400A MCCB (Set of 8) |
| 412 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 630A MCCB (Set of 8) |
| 413 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 800A MCCB (Set of 8) |
| 414 | Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 200/300A |
| 415 | Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A |
| 416 | S & E OF cu Link of 50 sq mm with copper lugs for connecting the switchgear to busbar |
| 417 | S & E OF cu Link of 16sqmm with copper lugs for connecting the switchgear to busbar |
| 418 | S & E OF cu Link of 35sqmm with copper lugs for connecting the switchgear to busbar |
| 419 | S&I of Alumininum Strip to provide the support for the connectors. |
| 420 | S & E OF Busbar connectors with seprator in each pole, Mounting on connector strips, 4pole from 16 to 50 sqmm for connecting the switchgear to the outgoing cable equivalent to connectwell |
| 421 | Supplying, erecting, testing & commisioning of required size electrolyte copper bus patti or bar tin plated in bus bar chamber/in panel or any other purpose, suitable for 500 volt with require capacity having thermal conductivity of 400w per meter with composition pure copper 99.9% current density 1.8 with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. CP-BB |
| 422 | Supplying, erecting, testing & commisioning of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 ¤t density 0.8 A per sq mm with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. CP-BB |
| 423 | Supplying,erecting,testing&commisioning GIsheet1.25mm(18SWG) having zinc coating of 350 micronswithgalvanizationprocess compliance toIS 2629:1985tobeused for fabrication ofboxespanelboards etc. including cutting,bending,drilling, welding, riveting etc. and paintingwithone coat ofred lead paintand 2 coats ofenamelpaintas per specificationno. CP/SH/CR |
| 424 | Supplying,erecting, testing &commisioningmetal workinCRCAsheet includingIron work for supports with fabrication ofboxes, panelboards, etc including cutting, bending, drilling,welding, riveting, treatedwithanti-rust treatment and paintedwith one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR |
| 425 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. |
| 426 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways/phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43Protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. |
| 427 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways/phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP43 Protection provided on iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. |
| 428 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification no.SW-MCBDB. |
| 429 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways/24 poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB. |
| 430 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways/36 poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB |
| 431 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 432 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 433 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 434 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 435 | Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 436 | Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 437 | Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 438 | Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 439 | Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 440 | Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 441 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 442 | Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 443 | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 444 | Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 445 | Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 446 | Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 447 | Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 448 | Supply, Fixing, Installation, Testing and Commissiong of Weather Proof Enclosure suitable to house the 4P/TPN/3P/DP/SP MCB |
| 449 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 450 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 240 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 451 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 452 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 453 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 454 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 455 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 456 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 457 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 458 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALNote:- 8) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 % |
| 459 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 460 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 461 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 462 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 463 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 464 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 465 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 466 | Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote:- 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 467 | Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 12 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CUNote:- 1) Item no 13-9-9 to 13-9-12 -For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 468 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 100 mm height with required standard accessories. |
| 469 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 400 mm width & 100 mm height with required standard accessories. |
| 470 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 500 mm width & 100 mm height with required standard accessories. |
| 471 | Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 472 | Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware. |
| 473 | Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 200 mm width & 20 mm height complete with necessary hardware. |
| 474 | Supplying, installing and testing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill ground ehancing compound complete with all accesories of copper materials & recording the results as per specification no EA-EP/EF |
| 475 | Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF |
| 476 | Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. |
| 477 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). |
| 478 | GI Strip: Supplying and erecting GI strip (50x6mm and 20x3mm) of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints as per specification no. EA-EP. |
| 479 | 25x6mm Cu Strip: Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints as per specification no. EA-EP. |
| 480 | Supplying and erecting annealed bare copper earth conductor of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. |
| 481 | Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete. |
| 482 | UPSSupplying, erecting, testing & commissioning of 1 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf , single phase input & 1 phase output complete with all protections as per specification no. APUPS (Without batteries) |
| 483 | Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries) |
| 484 | Supplying, erecting, testing & commissioning of 6 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. APUPS (Without batteries) |
| 485 | Supplying, erecting, testing & commissioning of 2kVA capacity on linepure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase outputcompletewithall protections as per specificationno. AP- UPS(Without batteries) |
| 486 | Supplying and erecting 12 V/42Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete |
| 487 | Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete |
| 488 | Supplying and erecting 12V/150Ah Tubularbattery with battery terminalwire, duly charged complete with 36 months warranty complete |
| 489 | Supplying, erecting, testing & commisioning of 20kVA capacity online pure sinewave, PWM, IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as pers pecification no. AP-UPS (Without batteries) |
| 490 | Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 491 | Supplying and erecting LED square / circular Max. 14 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mountingarrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 492 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 493 | Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 494 | Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 495 | Supply, Installation, Testing and Commissioning of 28W LED Recessed Mounted Luminaire suitable for installation on the techzone ceiling with 2800 lumens CRI>80, Aluminum extrusion and CRCA powder coated body with high transmittance PMMA opal diffuser for glare free symmetric light distribution |
| 496 | Supplying and erecting Bulk Head LED fitting Max. 10W with high transitivity diffuser with system lumens output of Min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50, IP66, IK09 rated including driver IP66, IK09 rated on provided PVC Block / wooden board with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 497 | Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W as per specification No. FG-IDF/LED. |
| 498 | Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm / 1200x300mm and finishing the background to match the original ceiling surface as per specification No. FGIDF/LED. |
| 499 | Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF. |
| 500 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF. |
| 501 | Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with ‘E’ class insulation. |
| 502 | Supplying & errecting of Aluminium Profile of required size with synthetic clear vision cover |
| 503 | S & E hanging type decorative counter lights |
| 504 | S & E occupancy sensor |
| 505 | Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. |
| 506 | Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. |
| 507 | Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED. |
| 508 | Supplying single door refrigerator domestic type of 200 to 230 litres storage capacity, minimum 5 Star inverter type, stabilizer free operation suitable for operation on 100V/300 V, 50 cycles complete with automatic temperature control, shall be marked on unit for sealed unit in refrigeration system and marking sr. no. and date of erection. |
| 509 | Supplying double door refrigerator domestic type of 300 to 360 litres storage capacity, minimum 5 Star inverter type, stabilizer free operation suitable for operation on 100V/300 V, 50 cycles complete with automatic temperature control, shall be marked on unit for sealed unit in refrigeration system and marking sr. no. and date of erection. |
| 510 | Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 litres per hour and storage capacity 80 litres with partially stainless steel body As per specification No. APWCR/ WC |
| 511 | Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC |
| 512 | Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter changeindication system .(for TDS more than 200) |
| 513 | Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1litre/min with activated carbon filter and softener operating on 230 V singlephase AC supply with UV fail & filter change indication system. |
| 514 | S & E Washing Machine Top Loading 9 Kg Equivalent to IFB |
| 515 | S & E Washing Machine MS Stand |
| 516 | S & E Washing Machine Tap |
| 517 | Dismantling of existing Tubelight fittings of any type & size. |
| 518 | Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear. |
| 519 | Dismantling of existing all size of electrical board |
| 520 | Only Erection of departmentally supplied all size of ceiling fan with necessary materials complete. |
| 521 | Only Erection of departmentally supplied all size of exhaust fan with necessary materials complete. |
| 522 | Only Erection of departmentally supplied all type of Smoke Detector with necessary materials complete. |
| 523 | Only erection of departmentally supplied all sizes of boardwith necessary materials complete. |
| 524 | Only erection of departmentally supplied tubelightwith necessary materials complete. |
| 525 | LIGHTING & SMALL POWER POINT WIRINGMains from DB to SB for Lighting Application:Supplying & erecting mains with 3x2.5 sq.mm HFFR copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BWNote:- 6) For use of HFFR wires add 5% in the rate of FRLSH wires. |
| 526 | Mains from DB to SB for Power Socket Application:Supplying & erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BWNote:- 6) For use of HFFR wires add 5% in the rate of FRLSH wires. |
| 527 | Mains from DB:Supplying & erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BWNote:- 6) For use of HFFR wires add 5% in the rate of FRLSH wires. |
| 528 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 529 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 530 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 531 | Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 532 | Supplying and erecting HMS PVC conduit 32mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 533 | Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) HFFR grade copper wire,flush type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 534 | Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) HFFR grade copper wire,flush type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 535 | Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) HFFR grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW |
| 536 | Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) HFFR grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 537 | Point wiring for independent plug, concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) HFFR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WGPW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 538 | Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. For use of point wiring in HFFR wires in buildings other than hospitals, approval of concerned Superintending Engineer, P.W. Regional Circle (Electrical) shall be taken. |
| 539 | Point wiring for ceiling fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 540 | Point wiring for independent plug in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 541 | Point wiring for light/bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) HFFR grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-HWNote:- 3)For point wiring with 2 way control point increase overall rate by 50% of point wiring. 8) For point wiring in HFFR wire increase rate by 2%. |
| 542 | Point wiring for ceiling fan hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n caping with 1.5 sq.mm. (2+1E) HFFR grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-HWNote:- 3)For point wiring with 2 way control point increase overall rate by 50% of point wiring. 8) For point wiring in HFFR wire increase rate by 2%. |
| 543 | Secondary point wiring for additional light/bell point in min 20mm PVC conduit with 1.5 sq.mm (2+1E) HFFR grade copper wire with required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 544 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 545 | Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 546 | Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2 |
| 547 | Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 548 | Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 549 | Secondary point wiring for additional light/bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification no. WG-PW/SWNote:- 8) For point wiring in HFFR wire increase rate by 2%. |
| 550 | Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete |
| 551 | Supplying and erecting modular type two way switch 6A/10A (2 module) on provided plate and box with wiring connections complete. |
| 552 | Supplying and erecting modular type switch one way 16/20 A on provided plate and box with wiring connections complete with neon indicator. |
| 553 | S & E of Industrial Type 20A 2 pin & Earth Metal Clad Socket & plug top in MS Powder coated box |
| 554 | SITC of Industrial Type 63A 2 pin & Earth Metal Clad Socket & plug top in MS Powder coated box |
| 555 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter on provided plate and box with wiring connections complete. |
| 556 | Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. |
| 557 | Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete. |
| 558 | Supplying, Installation, Testing and Commissioning of Occupancy Sensor for lighting control |
| 559 | Supplying, Installation, Testing and Commissioning of Passive Infrared Motrion Sensors for Passage Light Control and lighting control |
| 560 | Supplying and erecting modular type (two module) electronic step regulator for fan, on provided plate and box with wiring connections complete. |
| 561 | Supplying and erecting 6 to 32A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 562 | Supplying and erecting 16 to 32A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 563 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete. |
| 564 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module complete. |
| 565 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module complete. |
| 566 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module complete. |
| 567 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module complete. |
| 568 | Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected. |
| 569 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module complete. |
| 570 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 16/18 module complete. |
| 571 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 572 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 573 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 574 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 575 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 576 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 577 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 578 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16/18 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 579 | SITC of IP PABX for 2000 SIP Users , 4 inbuilt trunk port, 28 in built extension port, 200 Live calls Expandable upto 5000 SIP Users & 350 Live Calls, 1 SATA or SSD Provision connectivity,1x WAN 10/100/1000 1x IMS 2x LAN 10/100/1000, 1x USB LAN, WAN, 2 Nos of SIP trunck ,IPv4, IPv6, Static IP, DHCP (server & Client ) N2N VPN, Open VPN ICMP , NAT, DNS, PPPoE, SMTP,ARP, VLAN, NTP, TFTP, SSH, HTTPS SRTP, TLS, HTTPS, SSH, NAT, Firewall ACL, White/Block List , Session Timer, ACL, VPN, SIP Defence with 2 TB storage for voice call recording. CE ,FCC,ROHS Equivalent to Neron |
| 580 | SITC Of32 port Voip Media Gatewayto connect 32 Analog Extensions , 4 No 10/100 Ethernet Ports, Ipv4/Ipv6,TCP Client Static/Dynamic IP FTP,TFTP, IP Conflict Detection Equivalent to Neron |
| 581 | SITC Of 16port Voip Media Gatewayto connect 16 Analog Extensions, 4 No 10/100 Ethernet Ports, Ipv4/Ipv6,TCP Client Static/Dynamic IP FTP,TFTP, IP Conflict Detection Equivalent to Neron |
| 582 | SITC of IP based 8 port Trunk Card with 2 no. Giga Ethernet(1 Lan X 1 wan) 1 SFP Gbps with RJ11 Interface Equivalent to Neron |
| 583 | SITC Of 16port GSM/Volte Gatewayto connect 16GSM cards, 100 IP User, 2 10/100 LAN/WAN , 1 USB, 1 RJ 45 Console, 16X Antenna Connector, Display, Reset Button Complience CE/FC/ROHS Equivalent to Neron |
| 584 | SITC of VoIP Phone 128 x 64px backlit LCD display - 2 SIP accounts - 2 DSS/BLF keys - HD Voice - Opus Codec- 2 x 10/100 Mbps Ethernet port - PoEStand with 3 adjustable angles - 2.4GHz Wi-Fi - Wall mountable- Phone book (2000 records) - XML/LDAP remote phonebook Call history: In/Out/missed (60 records)- BLF & Message waiting indicator (MWI)- Voice mail, call park, call pickup - 2 Line keys & 4 Soft Keys- 7 features keys: message, headset, hold, mute, transfer, redial, hands-free speakerphone - 5 Navigate Keys Equivalent to Neron |
| 585 | SITC of VoIP Phone2.8” 320x240-Pixel Color Display Business VoIP Phone4 SIP accounts - 9 DSS/BLF keys- HD Voice - Opus Codec- 2 x Gigabit Ethernet port - 1x USB port- Stand with 3 adjustable angles - 2.4GHz Wi-Fi - Wall mountable- Phone book (2000 records) - XML/LDAP remote phonebookCall history: In/Out/missed (60 records)- BLF & Message waiting indicator (MWI)- Voice mail, call park, call pickup - 4 Line keys - 4 Soft Keys- 7 features keys: message, headset, hold, mute, transfer, redial, hands-free speakerphone - 5 Navigate Keys - Volume+/-- 1 x RJ9 Handset port- 1 x RJ9 Headset port - 1 x Power adapter- PoEEquivalent to Neron |
| 586 | SITC of 3.5\" 480 x 320px color displayBusiness VoIPPhone8 SIP accounts - 21 DSS/BLF keys- HD Voice - Opus Codec- 2 x Gigabit Ethernet port - 1x USB port- Stand with 3 adjustable angles - 2.4GHz Wi-Fi - Wall mountable- Phone book (2000 records) - XML/LDAP remote phonebook Call history: In/Out/missed (60 records)- BLF & Message waiting indicator (MWI)- Voice mail, call park, call pickup - 8 Line keys - 4 Soft Keys- 7 features keys: message, headset, hold, mute, transfer, redial, hands-free speakerphone - 5 Navigate Keys - Volume+/-- 1 x RJ9 Handset port- 1 x RJ9 Headset port - 1 x Power adapter- PEquivalent to Neron |
| 587 | SITC of PCBased Software with features call barge in, Call logs in details , Viewing call recoriding of specified extensions as perextensionnumberwise , datewise ,Details ofMised calls etc |
| 588 | SITC ofBinaural headset with noise cancelling mic , 180 degree rotation Arm , Adjustable steel bar , 330 degree rotationmic lever |
| 589 | SITC Plan for voice callfor SIP channel . Per SIP channel 4000 minutes free per month |
| 590 | Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TA |
| 591 | Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA |
| 592 | Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA |
| 593 | Supplying, erecting & commissioning 100 pairs MS junction box made from min. 1.5mm thick MS sheet as per specification no. WG-TA |
| 594 | Supplying, erecting & commissioning MDF Box300x300 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TA |
| 595 | Supplying, erecting & commissioning MDF Box 100x100 pairs made from min.1.5mm thick MS sheet as per specification no. WG-TA |
| 596 | Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete |
| 597 | Supplying, installing, testing & commissioning push button telephoneinstrument desk top/wall mount with caller ID & speaker unit as per specification complete. |
| 598 | Supplying and erecting modular type telephone socket two gang with safety shutter on provided plate and box with wiring connections complete. |
| 599 | Supplying and erecting modular type computer Jack RJ 45 with safety shutter,on provided plate and box with wiring connections complete. |
| 600 | Supply Installation Testing & commissioning of GSM FCT with Provision for Dual Sim |
| 601 | Supply, Installation, Testing and Commissioning of 5G Mobile Jammer for all service provider |
| 602 | Providing & Fixing of printed instruction chart for (with minimum 700 x 1000 mm in size) treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete |
| 603 | Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness upto 11 kV |
| 604 | Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto 3.3 kV |
| 605 | Supplying and fixing standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, antiseptic solution, etc. (All above contents shall be of standard makes) |
| 606 | Supplying, erecting, testing & commisioning GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in marathi and hindi erected at position for medium voltage (415 Volt) erecting with compliance to IS 2551-1982 as per specification no. CP/SH/CR |
| 607 | Supplying, erecting, testing & commisioning GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in marathi and hindi erected at position for HV/EHV (11000 Volts) erecting with compliance to IS 2551-1982. as per specification no. CP/SH/CR |
| 608 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 609 | Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete |
| 610 | Supplying & laying (including excavation) reinforced cement concrete pipe of NP-2 class of 250 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 611 | Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 250 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 612 | SITC of 600 x 600x750mm Manhole withCICover including masonary work including painting work |
| 613 | SITC of 300 x 300 x 450mm Manhole withCICover including masonary work including painting work |
| 614 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 615 | Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty |
| 616 | Supplying & errecting of Reading/Table lamp 5W Aluminium White body with CRI>80, Operating range 220-240 V & CCT upto 6500K |
| 617 | Supplying, erecting, testing and cpmmisioning of 2 core 1 sqmm copper sheathed control cable from indoor to outdoor unit of VRV Unit |
| 618 | Supplying and erecting LED Strip light Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED. |
| 619 | Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 620 | Making M-20 grade reinforced cement concrete foundation by considering thesafe soil bearing capacity as 10 T/sq.m at 1.5m depth including supply of steel,concrete, excavation, fixing provided nut bolts with the help of template, dulyplastered as per design complete (for 3 to 5m octagonal/ conical GI pole). |
| 621 | Supplying and erecting LED Lightfitting of 90W,including lamp, with PF > 0.95,classIP90 W and aboveHousing of pressure die cast alluminium alloy and heat sink extrudedalluminium complete per specification NoFGODF/ FLS-2 |
| 622 | SITC of LED Flood Light liminaire 150 W |
| 623 | Supply and erection of HOT dip galvanized Ring FOR INSTALLATION OF MINI HIGH MAST |
| 624 | Supply and erecting of BREEZA TYPEdecorative hot dipGlavanised singlebracket of 1. meter longmade from 48.3 mm OD pipe min 3mm thick with cap pipe length of 450 meter suitabal for OCT.pole with topof 70mm with 4 nos bolt . |
| 625 | Supply and erecting of BREEZA TYPEdecorative hot dipGlavanised Doublebracket of 1.0 meter longmade from 48.3 mm OD pipe min 3mm thick with cap pipe length of 450 meter suitabal for OCT.pole with topof 70mm with 4 nos bolt . |
| 626 | Supplying & erecting mains with 3*2.5Sq.mm F.R stranded/soild copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places asper specification No. WG-MA/BW |
| 627 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 1.5sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe |
| 628 | Supplying & erecting PVC armoured cable 4 core 10 Sq. mm. stranded/solid aluminium conductor complete erected with glands & lugs,on wall/trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL |
| 629 | Supplying & erecting PVC armoured cable 4 core 16 Sq. mm. stranded/solid aluminium conductor complete erected with glands & lugs,on wall/trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL |
| 630 | Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 631 | Supplying ,erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. CB-SB |
| 632 | provinding M-20 Concrete for resurfacing the road |
| 633 | Supplying & erecting pipe type earthing with 40mm,dia.G.I. strip complete with all marerials as per specification no. EA-EP |
| 634 | SITC of street light control panel inclusive of all Electrical Accessories mentioned in tender document. (With IOT based smart lighting system with 3 nos of CT for incoming side ) |
| 635 | Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FGBKT/WB |
| 636 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP. |
| 637 | Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification no FF-AFAS/CP. |
| 638 | Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification no FF-AFAS/CP. |
| 639 | Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration (Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008,NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification noFF-AFAS/CP. |
| 640 | Supply, Installation, Testing and Commissioning of loop card for the above Fire Alarm Panel |
| 641 | Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, minimum 10\" LCD or LED display with resistive touch screen or function keys and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels or minimum 80 characters backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station.Panel shall conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 /VdS/FM & UL with 3 years replacement warranty FF-AFAS/RP. (Compatiblewith 1/2 Loop Fire Alarm Control Panel), as per specification no FF-AFAS/RP |
| 642 | Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, minimum 10\" LCD or LED display with resistive touch screen or function keys and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels or on-board LCD alphanumeric backlit display suitable up to 640 characters with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel shall conforming to IS 15908:2021, IS 2189:2008, NFPA-72, EN 54 / VdS/FM & UL with 3 years replacement warranty FFAFAS/RP. (Compatible with modular FAS panel from 4 loop upto 10 Loop Fire Alarm Control Panel), as per specification no FF-AFAS/RP |
| 643 | Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bicolour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FFAFAS/SD. |
| 644 | Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with fixed temperature thermistor with 0°C to 88°C temperature range, complete with base as required, single/twin LED’s with 360 degree view, in-built locking mechanism to check the removal and pilferage of the detector. Detector Shall conforming to IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition, , as per specification no FF-AFAS/HD - ROR. |
| 645 | Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP. |
| 646 | Supplying, installing, testing and commissioning of Addressable Sounder cum Strobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum 75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189:2008, IS 15908:2021 / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST |
| 647 | Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI |
| 648 | Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs etc., Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FFAFAS/CRM-FCM |
| 649 | Supplying, installing, testing and commissioning of addressable fire monitor module for flow switches, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MM |
| 650 | Supplying, installing, testing and commissioning of addressable fire isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. module complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, FF-AFAS/ISM |
| 651 | Supplying, installing, testing and commissioning of 2C x 1.5sqmm stranded copper conductor, having Cross linkable Low smoke zero halogen insulation and LSZH inner and outer sheath in 25/20mm dia PVC FRLS conduit. Armoured cables shall comply to BS 6387 & BS 7846:2009 (latest edition). Cable shall be RED in color, Cables shall be estimated per device basis as per the drawings. Cabling for response indicator/ Input & Output modules to field equipment/ powershall not be considered separately as device. The cost shall be included the all fixing accessories such as clips, nails, screws, saddles Spacers ,heavy gauge Junction Boxes & Glandings etc. in theunit rate estimated for per device as per specification.Note:- 2) Item no 13-9-9 to 13-9-12 -For use of XL-HFFR insulation instead of FRXLPE insulated armoured cable increase material rates by 14 % |
| 652 | Supplying,installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FMCS |
| 653 | Supplying & erecting 2-Way Compact PA Wall Speaker of 16W High Fidelitysound with rated voltage 100V, power taps of 16W, 8W, 4W, Power Taps can beselected through an easily accessible rotary switch, Low impedence 8Ω, frequency response 85-20000Hz. Weather Resistant speaker with movable mounting bracket with required screws complete as per specification no. PA-CPAWS |
| 654 | Supplying, installing, testing and commissioning 15W PA Column Speakers with 15W RMS power in aluminium extruded cabinet, Moulded Plastci Covers & Metal mesh grill, frequency response 150-15,000Hz, operates on 100V line with power taps of 15/10/5/2.5W in black or white color,With Mounting clamps & Necessary hardware, as per decesion by Engineer-in charge complete as per specification no. PA-CS |
| 655 | Supplying & erecting 2-Way Compact PA Wall Speaker of 32W High Fidelity sound with rated voltage 100V, power taps of 32W, 16W, 8W, Power Taps can be selected through an easily accessible rotary switch Low impedence 8Ω, frequency response 80-20000Hz. Weather Resistant speaker with movable mounting bracket with required screws, complete as per specification no. PA-CPAWS |
| 656 | Supplying Installing, testing and commissioning of 25 Watt Horn Speaker Equivelant to Ahuja |
| 657 | Supplying, erecting, testing and commissioning PA Mixer 14 channel With MP3 Player, USB/SD card reader and Bluetooth facility, 48V Phantom Supply on all Channels, Professional mixer with 24 Digital Effects, 2 Group Outputs, 12 MIC and 10 LINE Balanced mono inputs, 2 STEREO Balanced inputs, Mic input - impedence/ gain -2kΩ/65dB, Frequency response 25Hz- 20kHz, impedence-600Ω ,S/N ratio- >80dB, Operates on 240V 50Hz AC mains, LCD display for viewing the EFFECTS/USB settings, each input channel has a GAIN control, 4 band active Equalizer controls, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control with Channel Mute Switch, with Easy and accurate monitoring of Left & Right output levels through individual 12 segment LED array, with 11 preset Equalizer settings & Headphone output with Level Control for output monitoring, complete as per specification no. PA-MXR |
| 658 | Supplying, installing, testing & Commissionming of PowerAmplifier of 2500W RMS Power ,Output Regulation 2DB , No Load to full load at 1KHZ , Line Input for connecting a mixer or another amplifier , 100V input for connecting to another amplifier 100V Output , 100V/70V , 4Ω and 2Ω Power Outputs , Ideal for large installations where very high power output is required , BIS approved. Equivelant to Ahuja |
| 659 | Supplying, installing, testing & Commissionming of Dual Channel Power Amplifier of 2000W (1000W+1000W) RMS Power at 2Ω Dual channel direct coupled power amplifier with Selectable HPF (120Hz / 80Hz / OFF), frequencyresponse & power bandwidth 20-20000Hz, input sensivity - 0dBu (775mV) & 4dBu (1.23V) (Selectable), S/N ratio >95dB, damping factor 400:1, input connection- 2×XLR, Stereo Phone Jack 6.3mm, output connection- Speakon 4-Way and Heavy duty, Two selectable input sensitivities, indicators like Power ON, Signal, Clip, Temperature with Class H operation for optimum efficiency, with shortcircuit overload protection & Cooling arrangement with temperature Sensor complete as per specification no. PA-DCPA |
| 660 | Supplying, erecting, testing & commissioning Mixer Amplifier 500W RMS Power with Built-in Digital Player with remote and having 7 Mic & 3 Aux Inputs with Box Speaker/Driver Unit selector switch to each zone , stereo/mono switch, frequency response 50-15000Hz, output regulation <2dB, serprate control for USB level. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme with Resettable circuit breaker for protection against overload and short circuit. The unit shall have speaker output range of 2Ω, 4Ω/(Low Impedence) and 70V & 100V/(High Impedence) & It can instant transfer to DC power(36V) if AC power fails. Signal to noise ratio between 60dB to 80dB. Complete as per specification no. PA-MA |
| 661 | Supplying, erecting, testing & commissioning Mixer Amplifier 250W RMS Power with Built-in Digital Player, MP3 Player with USB/ SD/ MMC Card Reader, Bluetooth with remote and having min 6 Mic & 2 Aux Inputs with Box Speaker/Driver Unit selector switch. Frequency response 50-15,000Hz ±3dB. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme with Resettable circuit breaker forprotection against overload and short circuit. The unit shall have speaker output range of 4Ω, 8Ω/(Low Impedence) and 70V & 100V/(High Impedence) & It can instant transfer to DC power if AC power fails. Signal to noise ratio between60dB to 65dB complete as per specification no. PA-MA |
| 662 | Supplying, erecting, testing & commissioning Mixer Amplifier 120W RMS Power with Built-in MP3 player with remote control for USB, SD/MMC card reader, with min 5 Mic & 2 Aux Input, bluetooth facility, frequency response 50-15,000Hz ±3dB, Signal to noise ratio between 60dB to 65dB min 5 LED array for output level monitoring. It Shall have Line Output to connect a Booster Amplifier and Preamplifier Output. The Amplifier shall have SpeakerOutputs - 4Ω, 8Ω, (Low Impedence) and 70V & 100V/(High Impedence), and can operate on 220-240V Power Supply & DC : 12V (facility to instant transfer to DC power if AC power fails) complete as per specification no. PA-MA |
| 663 | Supplying Installing, testing and commissioning of PA Gooseneck Microphone with Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence, sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of585mm(23\") long, felxible stem gooseneck condenser microphone & Heavy Duty Metal Base having on/off switch, LED indication and Suitable for 48V phantom supply as per specification no. PA-GM |
| 664 | Supplying Installing, testing and commissioning of 10 Zone paging Selector/ controller unit, for Use with Remote Paging Mike Console ,provision to cascade up to 30 sets. Equivelant to Ahuja |
| 665 | Supplying Installing, testing and commissioning of PAAudio Splitter input channels 2 x 100mV/20K Ω Balanced, Outputs 8 x 1V/50Ω Balanced Equivelant to Ahuja |
| 666 | Supplying Installing, testing and commissioning of 12 Zone Paging Mike Console, capability of cascading series connection with RJ 45,should be capable to page upto 300 zones with the help of the Paging Selector Controller unit equivalent Ahuja |
| 667 | SITC of Digital Player /Recorder with LCD Display Equivelant to Ahuja |
| 668 | Supplying and fixing 22U floor mount rack (Dimension-DxWxH – 800x600x1153 mm) as per specification no. WG-NAS/RAK |
| 669 | Supplying and fixing 27U floor mount rack (Dimension-DxWxH - 800X600x1400 mm) as per specification no. WG-NAS/RAK |
| 670 | Supplying, erecting, testing & commissioning of VHF WirelessDesktop Microphone & receiver Equivalent to Ahuja |
| 671 | Supplying, erecting, testing & commissioning of portabal PA Amplifier 50 Watts with 2 wireless mike , built in speaker , Bluetooth & Remote Control with trolley Equivalent to Ahuja |
| 672 | Supplying & erecting Microphone table/floor stand with height 350-530 mm, base dia. min 150 mm, min. weight 1.8 kg with superior quality of chrome plating/powder coating (resistant to rust & corrosion) having sturdy mechanism for ensuring trouble free movement and positioning of microphone complete as per specification no. PA-MTS |
| 673 | Supplying & erecting Microphone floor stand with Height 920-1500 mm, Base Dia- 230 mm, min. weight 3.6 kg with superior quality of chrome plating/ powder coating (resistant to rust & corrosion) having sturdy mechanism for ensuring trouble free movement and positioning of microphone complete as per specification no. PA-MFS |
| 674 | Supplying, Installing, testing and commissioning of Dual channel UHF wireless microphone & receiver, including 2 handheld dynamic transmitters with operating range of minimum 30 mtr distance in line of sight between transmitter & receiver and with 2 x 1.5V batteries of suitable size and and Current consupmtion <150mA, RF power output 10mW or higher suitable for frequency stability +/-0.005%, frequency response 50-15000Hz, channel frequency display & receiver with 220V-240V AC 50Hz AC Adaptor, distortion - /< 1% S/N ratio 100 dB suitable for same frequency as transmitter having controls like ON/OFF Switch, Volume control for both channels, LED indicators for RF & Audio Signal, channel frequency displays & operates on 12V DC through an AC adaptor complete as per specification no. PA-DPA-UHF |
| 675 | Supplying, Installing, testing and commissioning of Supercardioid professional Wired Dynamic microphone with noiseless magnetic read switch, frequency Response : 50-18,000Hz, Sensitivity : 2.5mV/Pa, Impedance : 300Ω, with quick detachable holder with 3-pin professional XLR connector & 10m twin core shielded low noise cable on provided stand complete as per specification no. PA-WDM |
| 676 | Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 2.5 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR |
| 677 | Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 678 | Supplying & erecting of High definition 4 Megapixel IP IR Dome / Bullet Camera with following features Image Sensor : minimum 1/2.8\" / 1/3\" Progressive Scan CMOS, Video Compression : H.264, H.265 or higher, at least Three individually configurable stream,Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range,ONVIF profile conformant,Lens Type : 2.8/4/6 mm Lens, fixed focal, Power Supply : Support 12VDC & PoE,IP67, Built in micro SD/SDHC/SDXC card slot of Built in microphone.Image Settings : brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Dig+D17ital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Operating temperature ( -30 to 60° C ) . Security- User account andpassword protection, HTTPS, IP filter,Protocol - DHCP, UDP, HTTP, NTP, DNS, RTP, RTSP, SMTP, TCP/IP, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. |
| 679 | SITC of4 Megapixel Smart ANPR Bullet camera to recognize vehicles, license plates IP67 and IK10 Electronic Shutter speedAuto /Manual 1/25 S-1/100,000 sROM 4GBRAM 1GB Motorized VarifocalNoise Reduction 3D NR Storage Bult-in TF card port , Intrusion detection , Loitering detection WDR 120 Db HLC, BLC , Audio Port ,Built-in MIC , Built-in Speaker , Audio Output 1 channel (RCA port) Network Port RJ-45. |
| 680 | Supplying & erecting of High definition 4/5 Megapixel IP IR PTZ Camera with following features Image Sensor : minimum 1/2.8\" Progressive Scan CMOS Video Resolution: minimum 2880 x 1620Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate : minimum 30 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range,ONVIF profile conformant. Auto Tracking, Pre-set Tour Settings, Pan : 360° endless, Tilt : From -15° to 90° (auto-flip 180°), minimum Pan Speed - from 0.1°/s to 160°/s, minimum Preset Speed: 240°/s, minimum Tilt Speed - from 0.1°/s to 120°/s, minimum PresetSpeed : 200°/s, Min Presets- 250, Min IR distance :150m,Lens Type : minimum 4.3 - 12.5mm Lens min 16 x digital zoom, min 30 x optical Zoom.Focus Mode : Auto/Zooming/One Push Manual,Lux sensitivity- minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 150m,Power Supply : support 12/24 VDC, 24 VAC & PoE,IP67/IP66, IK10, built in micro SD/SDHC/SDXC card slot minimum 256 GB, built in microphone. minimum Input/Output : Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out × 1.Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight |
| 681 | Supplying, installing, testing & commissioning of 16 Ch. Network Video Recorder (NVR) smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format Max.384 Mbps incoming /recording /Outgoing Bandwidth for recording of ANPR camera Audio input 1 channel RCA , Audio Output 1-channel RCA , Alarm Input4 Channels , Alarm Output 2 Channels HDD Interface 2 sata Ports. |
| 682 | Supplying, installing, testing & commissioning of 32/40 Ch Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI1/VGA1 outputs, provided Atleast one HDMI outputof 4K resolution, atleast one VGA output with output up to 1920x1080, Support H.265 or higher, H.264, MJPEG,Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA ports, ANR Technology,8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive Ethernet interface,support multibrand network Cameras, ONVIF conformance,Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specifications no. CCTV-NVR |
| 683 | Supplying, installing, testing & commissioning of 64/80 Ch Network Video Recorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 Megapixel Resolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920 × 1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptiveEthernet interface, support multi brand network Cameras,ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS.RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specificationss no. CCTV-NVR |
| 684 | Supplying, installing, testing & commissioning of 16 Ch. Network Video Recorder (NVR), suitable for 2 MP / 4 MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, MJPEG,Incoming Bandwidth 160Mbps with minimum 2 SATA Hard Disks, 2 SATA interfaces for 2 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O , RJ-45 10 /100/1000 Mbps self-adaptive support multibrand network Cameras, ONVIF conformance, TCP/IP, DHCP,DNS, DDNS, NTP,SMTP, HTTPS.RoHS, CE, FCC certified. |
| 685 | Supplying, installing, testing & commissioning of 8Ch. Network VideoRecorder (NVR), suitable for 2 MP / 4 MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920x1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 80Mbps with minimum 2 SATA Hard Disks, 2 SATA interfaces for 2 HDDs and capacity of each HDD up to 8TB,minimum 02 USB port, Alarm I/O , RJ-45 10 /100/1000 Mbps self-adaptive support multibrand network Cameras,ONVIF conformance, TCP/IP, DHCP, DNS, DDNS, NTP, SMTP,HTTPS.RoHS, CE, FCC certified. |
| 686 | Supplying & erecting 4 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, Maximum sustained transfer rate 150MB/Sec to 180MB/S. Drive bay supported 08+, Cameras supported up to64, Cache (MB) 64, Load/Unload Cycle -3000000, Work Load Rating per Year180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD |
| 687 | Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD |
| 688 | SITC of 1 TB Portable external hard disc with USB cord for connecting to the device |
| 689 | SITC of 2 TB Portable external hard disc with USB cord for connecting to the deviceHard disc |
| 690 | Supplying & erecting 32\" professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg.Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON |
| 691 | Supplying & erecting 43\" professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W,Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON |
| 692 | Supplying & erecting 55\" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following featuresBrightness: minimum 500 Cd/m2Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W,Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON |
| 693 | Supply, Installation, Testing and Commissioning of centralized system Software to record, view live footage, playback, manage via the network or DDNS, 24/7 surveillance with Key functions includes device management, user management, log management, alarm trigger, E-map with video verification, PTZ control,preset, cruise setting, picture capture, instant playback, real time recording and remote device configuration. |
| 694 | Supply, Installation, Wiring, Programming of i7 (or latest available at the time of supply) Intel processor with minimum 1TB HDD (or latest available at the time of supply), 8 GB RAM, 21\" TFT Monitor, DVD Writer, two serial and one parallel ports, multimedia speakers, infrared mouse; Work station shall be preloaded with requisite Licensed MS Windows Software. |
| 695 | Supplying, erecting, testing & commissioning of 1 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf , single phase input & 1 phase output complete with all protections as per specification no. APUPS(Without batteries) |
| 696 | Supplying, erecting, testing & commissioning of 2 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. APUPS ( Without batteries) |
| 697 | Supplying and erecting 12 V/42Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete |
| 698 | Supplying, installing, testing & commissioning ofWireless access point 900 Mbps 12dBi Antenna IP65 Protection , Surge protection common mode : ±2KV; Differential mode: ±1KV |
| 699 | Supplying, installing, testing & commissioning of 12 Volt 3 AmpPower Supply Unit |
| 700 | SITC of SFP Module For Optic Fibre Connectivity. |
| 701 | Supply, Installation, Testing and Commissioning of Rack mountable Layer III Managed Ethernet switch with 16 ports RJ45 10/100/1000 and 16 Fibre Ports complete with required LIU\"s, LC Couplers, Plates etc complete as per specifications and as required for final installation and commissioning |
| 702 | Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE 802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no. WG-NWC/ENS |
| 703 | Supplying, fixing, and configuring 24 ports with 4 combo SFP Port ethernet managed switch compliant with IEEE 802.3 standards, min. 370W PoEcapacity, with web view ethernet port for management in provided rack as per specification no. WG-NWC/GBS |
| 704 | Supplying, installing and testing of 12 Port Gigabit fiber ethernet switch with 10 SFP Ports & 2 LAN Ports Equivalent to D-Link |
| 705 | Supply, Installation, Testing and Commissioning of Layer 2 networking switch. 8# 10/100/1000 BT ports, 8 ports providing PoE+ as per 802.3a/f each delivering minimum 15Watts per port, min. 4 shared mini GBIC/SFP ports suitable for single mode fibre based ring topology configuration, supporting transceivers upto 2000m. |
| 706 | Supplying, fixing, and configuring 8-ports 1 GE un-managed gigabit PoE switch compliant with IEEE 802.3 standards, min. 120W PoE capacity with 2GE SFP uplink erected in provided rack complete. |
| 707 | Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch,10/100/1000 base-T, PoE smart switch plus 2 SFP erected in provided rack compliant with IEEE 802.3 standards complete. |
| 708 | Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP |
| 709 | Supply, Installation, Testing and Commissioning of CAT-6 8 port Jack Panel, 1U, Aluminium Housing, Black background with gray silk screened markings, Environment Temperature 20C to 85C, Humidity: 0-90% non-condensing with color coded wiring blocks, compatible with both T568A and T568B wiring options. Backward compatible with Category 5e cabling standards, supports solid 22-24 AWG wires and stranded 24-26 AWG cables. |
| 710 | Supplying, installing and testing UTP connector (RJ-45) as per specification no.WG-NAS/UTPC. |
| 711 | Supplying and fixing 1 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of Cat 6 type, compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC |
| 712 | Supplying and fixing 2 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of cat 6 type compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC |
| 713 | Supplying and fixing 42U floor mount server rack (Dimension-DxWxH –800x1000x2070 mm) as per specification no. WG-NAS/RAK |
| 714 | SITC of 19 inch 32U 600 mm depth Rack With all accessories Power Manager-2 No, Hardware pocket-1 Pkt and Fan-2 no\"s,Lock etc.) 1 Cable Managers, 2 - 3 pin power stip with 5 plug points including CKT Breaker ,Door Trims - Sheet steel, powder coated RAL 7037.Viewing area - Toughened tinted glass.Approved Makes:- HP/DELL/Valrack |
| 715 | Supplying and fixing 24U floor mount rack (Dimension-DxWxH –800x600x1267 mm) as per specification no. WG-NAS/RAK |
| 716 | Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480mm) as per specification no. WG-NAS/RAK |
| 717 | Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm) as per specification no. WG-NAS/RAK |
| 718 | Supplying and installing single mode simplex pigtail with SC/LC splicing complete |
| 719 | Supplying and fixing 24 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fiber cables on wall in provided U rack complete as per specification no. WG-NAS/ LIU |
| 720 | Supplying, erecting & terminating 10 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. |
| 721 | Supplying, erecting & terminating 5 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. |
| 722 | Supplying, erecting & terminating 15 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. |
| 723 | Supply Installation,Testing and commisioning of Network Components (Active) |
| 724 | SITC of CAT-6 Cable (For Signal & Power): Supplying and installing LSZH sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC |
| 725 | Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 μm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trenchas per specification no. WG-ELVC/OFC |
| 726 | Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC |
| 727 | Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-D standards as per specification no. WG-ELVC/NC |
| 728 | Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 729 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 730 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 731 | Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 μm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC |
| 732 | SITC of 2 Core 30/0.25 mm 1.5 Sq mmTwisted Armored PVC cable for Speaker |
| 733 | Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 2.5 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR |
| 734 | Supplying, erecting, testing and commissioning of 2 core 2.5 sqmm copper conductor shielded microphone cable complete as per specification no. PASMC |
| 735 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 736 | Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia.with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW |
| 737 | Supplying, erecting & terminating 10 pair telephone copper cable 0.5 mm dia.with high density polyethylene insulation, polyester taped, nylon rip cord & greycolour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW |
| 738 | Supplying, erecting & terminating 20 pair telephone copper cable 0.5 mm dia.with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW |
| 739 | Supplying, erecting & terminating 100 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW |
| 740 | Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S. Tape armoured polythene jacketed having laid in provided trench as per specification no. WG-TW |
| 741 | Supplying, erecting & terminating 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S. Tape armoured polythene jacketed laid in provided trench as per specification no. WG-TW |
| 742 | Supplying, erecting, testing and commissioning of 6HP, VRF/VRV airconditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal hot air discharge suitable for longerpiping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 743 | Supplying, erecting, testing and commissioning of 7HP to 8HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 744 | Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 745 | Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 746 | Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 747 | Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 748 | Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 749 | Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system out door unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 750 | Hi-Wall Indoor UnitsSupply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 0.6TR - 0.8TR ( 229 to 358 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. |
| 751 | Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specificationswith multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for costal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. |
| 752 | Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. |
| 753 | Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. |
| 754 | 4 Way Cassette Indoor UnitsSupply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact/standard size of nominal cooling capacity 0.6TR ( 420 cfm )/0.8TR ( 441 cfm ) having EERas per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 755 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm )having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 756 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) havingEER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remotecontrol, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 757 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 758 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 759 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm)having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 760 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.3TR (1165 cfm) to 4.0TR (1218 cfm )having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 761 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)ofsuitable cfm having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 762 | 2-Way Cassette Indoor UnitsSupply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR ( 512 cfm )having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 763 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.1TR (671 cfm ) to 2.7TR (918 cfm )having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 764 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.8TR (1377 cfm ) to 4.7TR (1624 cfm )having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 765 | SITC of 1-Way Cassette Indoor UnitSupply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 0.6TR (420 cfm) / 0.8TR (441 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 766 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.8TR (575 cfm) to 2.7TR (953 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 767 | Supply, Installation, Testing and Commissioning of all REFNET Joints for ODU\"s only |
| 768 | Supply, Installation, Testing and Commissioning of all REFNET Joints for IDU\"s only |
| 769 | Supplying, erecting, testing & commissioning fresh air intake system, ductablecircular inline fresh air fan inlet unit having 300cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete. |
| 770 | Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1ph, 230V, 50Hz, A.C. supply complete. |
| 771 | Supplying and erecting circular flexible/rigid PVC pipe duct of size 50mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulatingvalves/dampers, filters at position complete. |
| 772 | Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulatingvalves / dampers, filters at position complete. |
| 773 | Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulatingvalves/dampers, filters at position complete. |
| 774 | Supplying and erecting circular flexible/rigid PVC pipe duct of size 200mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulatingvalves/dampers, filters at position complete. |
| 775 | Supplying and erecting an air flow regulating valves/dampers in provided flexible or rigid duct/pipe of 50mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, couplings at position complete. |
| 776 | Supplying and erecting an air flow regulating valves/dampers in provided flexible or rigid duct/pipe of 100mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, couplings at position complete. |
| 777 | Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct/pipe of 150mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, couplings at position complete. |
| 778 | Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct/pipe of 200mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, couplings at position complete. |
| 779 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 780 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 781 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 782 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiation with OEM standards of VRV/VRF air conditioning system complete. |
| 783 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 784 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 785 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 786 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 787 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers withinsulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 788 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor.DX TFA3.0 TR TFA KIT |
| 789 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor.8.0 TR TFA KIT |
| 790 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. 12.0 TR TFA KIT |
| 791 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. DX AHU 8.0 TR AHU KIT |
| 792 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. 5.0 TR AHU KIT |
| 793 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. 17.0 TR AHU KIT |
| 794 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. 14.0 TR AHU KIT |
| 795 | Supply, Installation, Testing and Commissioning of AHU Kits for connecting AHU to VRF ODU / DX CONDENSING UNIT. The kits should have buit in arrangement of EXVs and allied contolling systems. These kits has to be compatible for any third party BMS and should release open protocol like BACnet / MODBUS.The cost shall also include the communication cable ( in FRLS PVC conduit ) from condenser unit to the kit.These kits shall be located inside the MS powder coated sheet metal casing and located near AHU\"s. Loading & Unloading, & Lifting Shifting till the dedicated floor level tobe done by the AC Vendor. 15.0 TR AHU KIT |
| 796 | Corded Remote for TFA Kit |
| 797 | Corded Remote for AHU Kit |
| 798 | Supply, Installation, Testing & Commissioning offactory builtFloor mounted /Ceiling Suspended Horizontal/ verticalDX Coildouble skin type AHU/TFA completedirect driven plenum blower with blower section with SISW Backward Curved High Efficiency EC fans, as detailed below, fire retardent flexible connections, direct driven/belt drive fan, compatible with DX.VRV outdoor condensing unit, comprising of thermostatic control,remote control and expansion valves VRV /VRF kit including Y- joints, filter sections with with Filters MERV 8 and MERV 13, 100% fresh air dampers with actuators (10 NM), TEFC motor of class \"F\" insulation, efficiency class IE-4 motor, suitable for operation on 415 + 10% volts, 3 phase, 50 Hz, AC supply, thermal break profile, leakage shall be as per L2 category. Drain connections, stainless steel drain pan complete with all fittings and accessories, necessary isolation arrangement, complete as required & as specified with the following capacities.The efficiency of the motors/fans should comply with atleast the requirement of ECBC plus from ECBC 2017. The selection of units shall be done for optimum efficiency & low noise level with compact design. Suitable controllers with internal wiring for EC Fans shall also be supplied with the AHUs as per system\"s requirement.with Corded Remorte for AHU Kit. Lifting shifting to the designated floor MS powder coatedad just able height type AHU Unit Stand, Commissioning of the unit. Vendor to provide and install vibration pads / vibration isolator for each unit.DX TFA2000 CFM (Air Flow), 40 MM (ESP), 12.0 Tr, 6 Rows, 1.5HP IP55 TEFC motor |
| 799 | SITC of 600 CFM (Air Flow), 40 MM (ESP), 3.0 Tr, 6 Rows, 1HP IP55 TEFC motor |
| 800 | SITC of 1200 CFM (Air Flow), 40 MM (ESP), 8.0 Tr, 6 Rows, 1HP IP55 TEFC motor |
| 801 | SITC of 700 CFM (Air Flow), 40 MM (ESP), 3.0 Tr, 6 Rows, 1HP IP55 TEFC motor |
| 802 | SITC of DX AHU Vertical Floor mounted type3200 CFM (Air Flow), 45 MM (ESP), 8.0 Tr, 6 Rows, 3HP IP55 TEFC motor |
| 803 | SITC of 2000 CFM (Air Flow), 45 MM (ESP), 5.0 Tr, 6 Rows, 1.5HP IP55 TEFC motor |
| 804 | SITC of 6800 CFM (Air Flow), 45 MM (ESP), 17 Tr, 6 Rows, 5HP IP55 TEFC motor |
| 805 | SITC of 5600 CFM (Air Flow), 45 MM (ESP), 16 Tr, 6 Rows, 5HP IP55 TEFC motor |
| 806 | SITC of 6500 CFM (Air Flow), 45 MM (ESP), 15.0 Tr, 6 Rows, 5HP IP55 TEFC motor |
| 807 | Supply, Installation, Testing and Commissioning of Corded Remote Control for 1-Way Cassette, 2-Way Cassette, 4-Way Cassette, Compacy Cassette, Ductable Units. |
| 808 | Supply, Installation, Testing and Commissioning of Cordless Remote Control for 1-Way Cassette, 2-Way Cassette, 4-Way Cassette, Compacy Cassette, Ductable Units with sensor |
| 809 | Supply, Installation, Testing and Commissioning of Corded Remote Control for Hi-Wall Units |
| 810 | Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU\"s can be controlled and up to 992 IDU\"s can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system. |
| 811 | Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 812 | SITC of Outdoor Units COWL piece with rain protection louversSupply, installation, testing and commissioning of outdoor connection with rain protection louvers, GI wiremesh, Bird screen, cowl & dampers. |
| 813 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.250 mm Dia |
| 814 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.200 mm Dia |
| 815 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.150 mm Dia |
| 816 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.100 mm Dia |
| 817 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.65 mm Dia |
| 818 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.50 mm Dia |
| 819 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.40 mm Dia |
| 820 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.32 mm Dia |
| 821 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.25 mm Dia |
| 822 | Electrical contractor shall terminate power in individual switch socket for each IDU as per requirement. For VRF ODU incoming power shall be provided at the PDB / isolator, from there to each VRF ODU the cabling shall be carried out by HVAC contractor.Power Cables for ODULT Cable from Local Isolator to ODU (14HP to 20HP): Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote: 4) For Item No 7-2-12, 7-2-13, 7-2-18 to 7-2-30 and 7-2-33 to 7-2-45: For round wire armouring increase rates by 15%.5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 823 | LT Cable from Local Isolator to ODU (6HP to 12HP): Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote: 4) For Item No 7-2-12, 7-2-13, 7-2-18 to 7-2-30 and 7-2-33 to 7-2-45: For round wire armouring increase rates by 15%.5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 824 | Power Cables for IDUSupplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote: 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 825 | Control Cables between ODU & IDUSupplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in providedtrench/ pipe as per specification no. CB-LT/CUNote: 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 826 | Control Cables between IDU & RemoteSupplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUNote: 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 827 | EarthingSupply, Laying, Installation, Testing and Commissioning of following earthing conductors for ODU units. 2R x 10sqmm Cu PVC FRLS Insulated Wire |
| 828 | SITC of 2R x 6sqmm Cu PVC FRLS Insulated Wire |
| 829 | SITC of 2R x 4sqmm Cu PVC FRLS Insulated Wire |
| 830 | SITC of 2R x 2.5sqmm Cu PVC FRLS Insulated Wire |
| 831 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation& temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 832 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation& temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 833 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation& temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC |
| 834 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 tomaximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 835 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete as per specification no. AP/AC-CP |
| 836 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete as per specification no. AP/AC-CP |
| 837 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete as per specification no. AP/AC-CP |
| 838 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 32mm complete as per specification no. AP/AC-CP |
| 839 | Supply, installation, testing and commissioning of outdoor connection with rain protection louvers, GI wiremesh, Bird screen, cowl & dampers. |
| 840 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.50 mm Dia |
| 841 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.40 mm Dia |
| 842 | Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wallsleeves, hangers, supports, anchors.. Drain piping in hard PVC with all fittings, supports and clamps upto 50 mm dia. including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) / 60kg/m3 density stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint.25 mm Dia |
| 843 | Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 844 | Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 845 | Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 846 | Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 847 | Power Cabling between Isolator & AC Unit Control Panels:Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note: 5) For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rate by 2 % |
| 848 | Supply, installation, testing and commissioning of Cyclic Timer complete withsupports, electrical cabling length suitable as per site condition, of following sizes2 AC unit |
| 849 | Supply, installation, testing and commissioning of Cyclic Timer complete withsupports, electrical cabling length suitable as per site condition, of following sizes3 AC unit |
| 850 | Supply, installation, testing and commissioning of Cyclic Timer complete withsupports, electrical cabling length suitable as per site condition, of following sizes4 AC unit |
| 851 | Ventilation FansFans with motor, Starter Panels/MCB, with potential free contacts for fire signal trip. SITC cubicle typeLocal Control Panels / DOL StarterPanels with MCB Single Phase Preventer/DP Switch.The inline fans & Cabinet fans shall be complete with Centrifugal fan, unit casing, access door, electrical connections canopy fan shall be suitable for outdoor installation A/C contractor to include all accessories for installation of inline fan with motors, starters, power cabling from power, sockets nearby. Fresh airto have EU Filter with frame & bird screen.Inline Ducted Circular / Rectangular fans shall be direct driven type with all accessories etc.complete as per specifications & drawings shall be included.Quoted cost shall include control & starter panel, OLP, SPP, ON/OFF push buttons with ON indications, 2nos. non polarised NO-NC contacts. Fans shall able to be controlled from remote location by suitable arrangement.Cabling: Power cabling of copper armoured cable from control panel to motor with double compression gland. Cabling and earthing limited to 10 RMT max. Contol cabling for hook up to BMS is not included here.(Installation offans shall mean unloading, lifting-shifting, positioning, levelling & installation in place)9\" dia Propeller Fan |
| 852 | S & E of 12\"\" dia Propeller Fan |
| 853 | Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380mm. 1400 RPM complete erected in position as per specification no. FGFN/EXF |
| 854 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. |
| 855 | Supplying & erecting 20 SWG G.I sheet metal cawl rectangular / round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG FAS/MSC. |
| 856 | Supplying & erecting 20 SWG G.I sheet metal cawl rectangular /round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FGFAS/MSC. |
| 857 | SITC of Inline Cabinet type Fans 6000CFM @45 MM Static |
| 858 | SITC of Inline Cabinet type Fans 2000CFM @40 MM Static |
| 859 | SITC of Inline CircularFan 1000CFM @30 MM Static |
| 860 | SITC of Inline Circular Fan 150CFM @30 MM Static |
| 861 | SITC of Inline CircularFan 650CFM @30 MM Static |
| 862 | SITC of Inline Circular Fan 550CFM @30 MM Static |
| 863 | SITC of Inline CircularFan 450CFM @30 MM Static |
| 864 | SITC of Inline Circular Fan 400CFM @25 MM Static |
| 865 | SITC of Inline Circular Fan 350CFM @25 MM Static |
| 866 | SITC of Inline Circular Fan 300CFM @25 MM Static |
| 867 | SITC of Inline Circular Fan 250CFM @20 MM Static |
| 868 | SITC of Inline Circular Fan 200CFM @20 MM Static |
| 869 | SITC of Inline Circular Fan 150CFM @20 MM Static |
| 870 | Supply, Installation, Testing and Commissioning of outdoor connection with rain protection louvers, GI wiremesh, Birdscreen, cowl & dampers. |
| 871 | Supply, installation,testing and commissioning of Al. extruded powder coatedSupply Air Disc Valve (Round). Supply, installation and adjusting of disc valves suitable for exhausting toilet foul air ,comprising of an adjustable centre cone and coupling sleeve made ofAluminum sheet duly epoxy painted with approved color. The disc valve shall be fitted with a galvanised steel installation frame and the sleeve shall incorporate a foam-rubber gasket for airtight sealing. The centre cone should be adjustable for balancing and with a locking arrangement to maintain the desired flow rate. If size is not Finalize |
| 872 | SITC of 100 mm Neck Size or 164mm Face Size |
| 873 | SITC of 152 mm Neck Size or 345mm Face Size |
| 874 | SITC of 203 mm Neck Size or 445mm Face Size |
| 875 | Supply, installation, testing & commissioning of Factory fabricated Galvanised Iron ( GI )shall conform IS: 227 – 1977 Sheet ducting complete with splitter dampers, turning vanes, access doors, supports etc. as per drawings and specifications. Supports for ducts at 2.4m distance apart upto 2250/1.2m distance part for larger ducts. Each support shall have minimum 2 vertical rods of 10mm/12mm diameter with 40 x 40 x 6 or 50 x 50 x 6 angles as approved by Consultant. No slip joints shall be allowed. Flanges shall be Rolamate or equivalent and ducts upto 1500 width shall bewith rod Support. 18 G Plenum ( Site Fabricated ) |
| 876 | S & E of 20 G Ducting(upto 1500mm upto 2250mm any side) |
| 877 | S & E of 22 G Ducting(above 750mm upto 1500mm anyside) |
| 878 | S & E of 24 G Ducting(upto 750mm any side) |
| 879 | Supply, installation, testing and commissioning air curtain of 3feet width having air throw velocity of 12 to 14m/sec, low noise level up to 38 to 46dBA suitable for door height upto 9feet, working on 1 phase, 230V, 50Hz, A.C. |
| 880 | Supply, installation, testing and commissioning air curtain of 4feet width having air throw velocity of 21m/sec, low noise level up to 38 to 46dBA suitable for door height upto 9feet, working on 1 phase, 230V, 50Hz, A.C. supply. |
| 881 | Supply, installation, testing and commissioning air curtain of 6feet width having air throw velocity of 21 m/sec, low noise level up to 38 to 46dBA suitable for door height upto 9feet, working on 1 phase, 230V, 50Hz, A.C. supply. |
| 882 | Supply, installation, testing and commissioning of Underdeck insulation withfollowing typeSupply, fabrication and laying of under deck thermal insulation with Closed Cell Foam of suitable thickness & of approved make as specified and shown on the drawing complete with: The insulation shall meet the Class ‘O’ Fire category. All adhesives, sealants, paints, resins etc. to have VOC level as permitted by LEED requirements. 25 mm thick Closed cell nitrile rubber stuck with SR 998 as per specifications |
| 883 | SITC of 20 MM / 30 MM thick Pre Insulated Sheets with CFC free closed cell phenolic foam protected with 80 micron aluminum foil facing on both sides Rigid expanded polyurethane foam will be 48 kg/m3 density, CFC free with a thermal conductivity of not less than 0.0285 W/mk.The duct material and the adhesive shall be of class \"O\" fire rated and NFPA 90A, UL 181 Standard. The sealant used shall be low VOC. |
| 884 | SITC of 50mm thick TF thermacole insulation, GI chicken wire mesh, using Al. foil adhesive tapes at all joints for fixing and GI screws and washers as required. |
| 885 | Supply Install Testing and Commissioning of touch Interactive display with Direct type LED Size (diagonal) 86\" or aboveResolution 3840(H)*2160(V) Pixel (UHD 4K) or higherBrightness 400 cd/m2 or higher, Contrast ratio 5,000:1 or betterContrast ratio (dynamic) 7,000:1 or betterViewing angle 178° or better, Response time 6ms or lesser,Life 50,000 hours or higher,Speaker count 2 or more, Watts per speaker 20W or higher. minimum 4.0mmor higher toughened Glass with 7H Mohs Standard or higher 0.80mm or better, Upto 20 Point Touch or higher & 10 Point or higher Writing. 40 or more points in WindowsTouch resolution 32768 x 32768 or higher. Approved Makes: Optoma, Avacor, Sharp |
| 886 | Supply Install Testing and Commissioning of touch Interactive display with Direct type LED Size (diagonal) 75\" or aboveResolution 3840(H)*2160(V) Pixel (UHD 4K) or higherBrightness 400 cd/m2 or higher, Contrast ratio 5,000:1 or betterContrast ratio (dynamic) 7,000:1 or betterViewing angle 178° or better, Response time 6ms or lesser,Life 50,000 hours or higher,Speaker count 2, Watts per speaker 20W or higher. minimum 4.0mm Toughened Glass with 7H Mohs Standard or higher 0.80mm or betterTouch resolution 32768 x 32768 or higher. Approved Makes: Optoma, Avacor, Sharp |
| 887 | Supply Install Testing and Commissioning of touch Interactive display with Direct type LED Size (diagonal)65\" or aboveResolution 3840(H)*2160(V) Pixel (UHD 4K) or higher Brightness 400 cd/m2 or higher, Contrast ratio 5,000:1 or betterContrast ratio (dynamic) 7,000:1 or betterViewing angle 178° or better, Response time 6ms or lesser,Life 50,000 hours or higher,Speaker count 2, Watts per speaker 20W or higher. minimum 4.0mm Toughened Glass with 7H Mohs Standard or higher 0.80mm or betterTouch resolution 32768 x 32768 or higher. Approved Makes: Optoma, Avacor, Sharp |
| 888 | Supply Install Testing and Commissioning of Standard wall mount for above displayApproved Makes: Custom/Chief/B-teck |
| 889 | Supply Install Testing and Commissioning of Standard Ceiling mount for above displayApproved Makes: Custom/Chief/B-teck |
| 890 | Supply Install Testing and Commissioning of 7,000 lumens or higher brightness projector with 4K and HDR compatability, Dust resistant IP6X certified optical engine for 24/7 operational capabilities or better. Display technology DLP or betterResolution WUXGA (1920x1200) or higherBrightness 7,000 lumens or higherContrast ratio 300,000:1 or betterNative aspect ratio 16:10Aspect ratio - compatible 4:3,16:9,16:10Keystone correction - horizontal +-30° or betterKeystone correction - vertical +-30° or betterDisplayable colours (millions) 1073.4 or higherApproved Makes: Optoma/Barco/Christie |
| 891 | Supply Install Testing and Commissioning of Ceiling Mount for above ProjectorApproved Makes: Custom/Chief/B-tech |
| 892 | Supply Install Testing and Commissioning of Supply Install Testing and Commissioning of Motorised Screen with High Gain reflection. Diagonal Size 150\" or better Tab Tensioned Screen, Surface :- Matt White, Height :- 74\" , Width :- 131\" Diagonal :- 150\", Black Drop :- 12\" (or as needed on site), Ratio :- 16:9 Approved Makes: Milan/Draper/DALite |
| 893 | Supply Install Testing and Commissioning of Cable Cubby with 2 x Universal Power, 1 x USB-A Mobile Charger, 1 x USB-C Mobile Charger, 1 x HDMI 2.0v, 1 x Type A USB 3.2 Gen 1, 1 x Type C USB 3.2 Gen 1, 2 x CAT 6 Network/RJ-45Approved Makes: Crestron/Ampere Link/Extron |
| 894 | Supply Install Testing and Commissioning of Active wall plate set with 18G Uncompressed HDMI 2.0 / USB-C Auto Switching 4K60 and USB 2.0 High speed Wall Plate extender over HDBaseT 3.0 with client hub on both ends. HDBaseT3.0 Uncompressed 4K60 or better & USB Transmitter & Receiver set with accessories Uncompressed HDMI 2.0 extension over HDBaseT 3.0 resolution support up to 4K60 4:4:4 or better, control, and USB2.0 with isochronous data support for cameras and other USB peripherals is a must. HDMI / USB-C auto switching based on video sense or 5V detection USB-C full featured passes AV via ALT-DP, acts as a USB host, and provides charging power up to 40w or higher to the host computer over USB-C when the optional & included 2nd power supply is used. HDMI 2.0b, HDCP 2.2 18Gbps 4K60 4:4:4 support or better Supports HDR, HDR10+, Dolby Vision LLM, HLG or better Supports 4K60 4:4:4 up to 40m and 4K30 or below up to 70m using Cat6A U/FTP or above Supports Isochronous USB data for maximum camera compatibility Audio de-embed on RX Auto 4K to 1080P downscaling will automatically scale 4K signals to 1080P when connected to a 1080P display EDID Management Approved Makes: Liberty AV/Lightware/Extron |
| 895 | Supply Install Testing and Commissioning of Wireless Collaboration wireless presentation device which can enable wirelessly connects users to displays. Device must provide app-free agnostic support for Windows, Apple and Chromebook devices for wireless presentations. Video H.264 compression or better, Audio LPCM 2.0 or better, Resolution Up to 4K@30Hz or higher, Ethernet 10/100/1000-BASE-T RJ-45 LAN or better, Wireless Miracast and Local Wi-Fi Mode: 802.11ac dual-band 3x3 MIMO or better Network Bridge: 802.11ac dual-band 2x2 MIMO or better, Interfaces 1 x HDMI® Input 1 x HDMI® Output 1 x Analog 3.5mm audio Output 2 x USB 2.0 Host Type-A, 1 x USB 3.0 Host Type-A, 1 x DC Power Jack Content Protection is a must with HDCP 2.x or higher. Approved Makes: Screenbeam/Extron/Barco |
| 896 | Supply, Installation, Testing & Commissioningof AI based Full HD 1080p @ 60fps or better Presenter PTZ Tracking Camera with Dual Camera-onePTZCameraforPresenterTrackingandsecondfixed lensPanoramicCamera. PTZ Presenter Camera should support min 12x Optical Zoom and 12x Digital Zoom or better with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees or better, Field of View for PTZ Camera should be min 72 Degree or higher and for Panoramic Camera min. 100 Degree or better, camera should support simultaneous outputs through HDMI, USB 3.0 andIP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE and Virtual USB Driver. Quoted model should be BIS, CE,Clickshare,FCC & RoHS Certified with TestLab Reports. Approved Makes: Lumens/PTZ Optics/Panasonic |
| 897 | Supply Install Testing and Commissioning of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 2x HDMI or better & IP Inputs with 4x Line Inputs or better, 2x HDMI Outputs or better. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB or higher inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 or more unicast streams.The recorded files should have the option of time and date stamp. Quoted model should be CE, FCC & RoHS Certified with TestLab Reports. Must supply compatible and reputed capture card along with the recording and Streaming DeviceApproved Makes: Epiphan/Newtek/Lumens |
| 898 | Supply,Installation,TestingandCommissioningofVideo SoundbarUSB conferencingdevicewitharraymicrophone havingStaticandadaptive dynamic beam-forming, 3 exclusion zones or higher, Stereoacoustic echo cancellation, digital noisesuppression, single cable operation, Video over USB. Supportedresolutions:UHD2160p (4K); 1080p, 720p, 960x480, 848x480, 640x480, 640x360, 432x240 (30 fps) or better, 2 x 20 Watt Stereo loudspeakers or better, Input/Output ports: 1 x USB-C 3.0, 1 x USB-A 3.0, 1 x HDMI 1.4 out, 1 xAnalog audio input (stereo, 3.5 mm) or better, 1 x Gbps Ethernet or better,RJ-45,Built-in camera with 120° FOVdiagonal,110° FOV horizontal, 80° FOV vertical, 8 megapixel sensor, 4K resolution or better, Auto white balance,Auto brightness,Digital noise reduction, Easily connecta smartphoneviaBluetooth connectivity touseas astandalone speakerphone or stream music.Approved Makes: Bose/Cisco/Vaddio |
| 899 | Supply Install Testing and Commissioning of four or more input by four or more output HDMI 2.0b matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with HDR output support for each channel. The matrix shall feature advanced independent EDID management control for each HDMI.The switcher shall have individual scaler control on each output port. The digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. The 4x4 or higher confuguration switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. Approved Makes: Liberty AV/Lightware/Extron |
| 900 | Supply Install Testing and Commissioning of 4x2 or higher (Matrixed HDMI / HDBT Outputs)Switcher with 2 or more HDMI, 1 pr more DP, 1 or more USB-C inputs and 1 or more HDMI and 1 or more HDBaseT output up to 70 meters or higher which can be mirrored or matrixed. Complete Plug and Play, USB switching hub must be built in. Switchable 2 x USB-B host ports or higher and 2 x USB-A 3.0client/peripheral ports or higher. USB-C should acts as a 3rd host port. USB Host ports can be set to switch manually, automatically, or set to follow a video input automatically. The switcher supports resolutions up to HDMI 2.0 or better, 4K/60Hz/4:4:4 8bit deep color, HDBaseT outputs supports resolutions up to HDMI 2.0b, 4K/60Hz/4:2:0 8bit deep color or better, Auto Switching with selectable signal sense or 5v sense modes or manual switching via front panel, WebGUI, or API/3rd party control, HDCP2.2 Compliant is a must, Fully function USB-C port provides up to 40w charging power or better when device is locally powered. EDID management per input, Auto Display control to power on/off display, change input when source is detected using stored RS232 commands or CEC.Approved Makes: Liberty AV/Lightware/Extron |
| 901 | Supply Install Testing and Commissioning of HDMI 2.0 18G or higher distribution amplifier with 2 or more switchable HDMI 2.0 inputs and 8 or more HDMI 2.0 outputs Front panel button, RS232, or TCP/IP control for input selectionSupports 4K60 8-bit 4:4:4 color & HDR Analog and Digital audio de-embedding HDCP2.2 compliant is a must Auto down scaling for maximum compatibility with mixed resolution displays Approved Makes: Liberty AV/Lightware/Extron |
| 902 | Supply Install Testing and Commissioning of HDMI 2.0 or higher HDBaseT Extension Set w/ Control, & Ethernet. Complete set includes Transmitters, Receivers, power supply, and IR flasher/emitter Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 or better up to 100m (4K 70m / 1080P 100m) or higher Extends bi-directional IR, RS232 and ethernet pass through. Flexible PoC (Power on either end) Supports HDR10 HDCP 2.2 compliant is a must Flexible power design (use power supply at TX or RX) Includes re-clocking circuitry for maximum device compatibility Locking power connector (power supply included) Approved Makes: Liberty AV/Lightware/Extron |
| 903 | Supply Install Testing and Commissioning of2 gang Wallplate type POE powered AVOIP transmitter, 4K @60 Hz 4:4:4, HDMI/USB-C Auto switching or better, Encode audio / video, USB, IR, RS232, and power over IP network up to 100m or higher, The\"USB-C\" is a shall be a full featured input supporting video via ALT-DP, USB data, and power when optional power supply is used. The system shall support resolutions up to 4K with 7.1 audio, HDR10, and HDCP 2.2 compliant, PoE or DC power input,1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 650 Mbps up to 850Mbps , analog audio input port for audio embedding, RS232 port as pass through to control a third party device, USB KVM inbuilt. The plate shallhave host port connection for connecting USB host devices such as a computer supporting USB 2.0High Speed up to 150Mbps or better and can communicate with client side devices connected to a decoder. The USB-C port is also a host port for USB. Th plate shall support Dante audio as well. The wall plate shall be TAA complaint.Approved Makes: Liberty AV/Lightware/Extron |
| 904 | Supply Install Testing and Commissioning of box type POE powered AVOIP encoder that supports HDMI video up to 4K60 4:4:4 10 bit deep color for HDR10 support or higher specifications, HDCP 2.2 and multichannel audio support over a 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 650 Mbps with peak values up to 900Mbps or better. The encoder shall support RJ45 for copper or SFP for Fiber connections to the network. The encoder shall suport encoder supports control of 3rd party devices via RS232 and IR. USB KVM inbuilt is a must. The encoder shallhave host port connection for connecting USB host devices such as a computer supporting USB 2.0 High Speed or higher up to 150Mbps or better and can communicate with client side devices connected to a decoder. The encoder shall also support 2 channel output by 2 channel input via Dante audio or better. The encoder shall be TAA comnpliant and shall support ARC and CEC as well.Approved Makes: Liberty AV/Lightware/Extron |
| 905 | Supply Install Testing and Commissioning of box type POE powered scaler decoder that supportsvideo signals natively from source or can be scaled to 1080p or 4K60 at 4:4:4 with HDR10 or better, HDCP 2.2 and multichannel audio support or better. The decoder shall supportmultiple devices configuration to make a video wall. The decoder shall support control of 3rd party devices via RS232 and IR. The decoder shall have USB client port connections for peripherals connection that is USB 2.0 High Speed up to 190Mbps or bette that can communicate with a host side device connected to an encoder. The decoder shall also support 2 or more channel output by 2 or more channel input via Dante audio.The decoder shall be TAA comnpliant and shall support ARC and CEC as well.Approved Makes: Liberty AV/Lightware/Extron |
| 906 | Supply Install Testing and Commissioning of AVOIP system Controller which comes pre loaded with required software which configures, manages and controls AVOIP devices on a Network. Auto ON feature, server powers on automatically when power is present. Optional managed services and analytics license allows gather data about how the system is used and to receive system error notifications by email, Optional UI Creator control system license allows to build unlimited user interfaces to control the IP video system as well as other components via Ethernet, IR and Serial. Processor Intel® Pentium® J4125 or higher,GPU Intel® UHD 605 or higher, Graphics Memory 8GB DDR4 SO-DIMM or better, Internal Storage, eMMC 5.1, Video Output HDMI 1.4 , Mini Display Port or betterApproved Makes: Liberty AV/Lightware/Extron |
| 907 | Supply Install Testing and Commissioning of Flush Mount Deleagte Discussion Unit with removable microphone capability. Delegate Discussion Unit with built-in Digital Signal Processing Unit with Microphone On / Off Button is a must. User Button with Feedback, High-quality integrated loudspeaker, minimum 4W or better. Audio quality : 16 bit digital or better. Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment.Connectivity: Concealed conference bus connections. 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). Certification: CE; BIS Manufacturer must have office in India and Service Center. OEM must submit the Certificate of Incorporation. Approved Makes: Brahler/Audio Technica/Televic |
| 908 | Supply Install Testing and Commissioning of Flush Mount Chairman Discussion Unit with removable microphone capability. Chairman Discussion Unit with built-in Digital Signal Processing. Unit with Priority and Next-in-Line Configuration. Priority button silences all delegate microphones and allows only the chairperson to speak. Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak. Audio quality : 16 bit digital or better. Frequency response: 25 Hz-15,000 Hz or better. Connectivity:Concealed conference bus connections.2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). Compatible screw lock microphone connectivity. Certification: CE; BIS Manufacturer must have office in India and Service Center. and shall submit the Certificate of Incorporation. Approved Makes: Brahler/Audio Technica/Televic |
| 909 | Supply Install Testing and Commissioning of Central Conference Controller with Recording & Web Server. Conference Controller with built-in Digital Signal Processing. Controller unit with 4 Bus Connections (4 branches or 2 closed loops) for redundancy mechanism. The controller should support total cable length of a branch / loop are upto 400M or more . The maximam cable length between units or between units and central unit is 80M or more. Control & Configure the Controller via the Integrated Web Server. 2 x USB Connections to connect USB storage device for direct recording of the meeting. Recording in mp3 or wav format, seamless takeover of recording between 2 USB devices,playback through units loudspeakers. Maximun number of open microphones at a time- upto 8 or better. Camera Control (look at me) Integration Capability. Controller with LCD display to implement several conference mode: Direct access, Request, Push to talk, FIFO, Vox control, Selectable Voice Activation. Volume control 0 dB to -46 dB + “OFF”, Digital Acoustic , Feedback Reduction, With Audio Input & Output for connectivity with external system like amplifier, wireless microphone & audio/video conference system OEM must have office in India and Service Center. OEM must submit the Certificate of Incorporation. CE and BIS Certified Approved Makes: Brahler/Audio Technica/Televic |
| 910 | Supply, Installation, Testing & Commissioning Digital wireless Lapel Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz or better Bandwidth shall allow for up to 90 or more channels Up to 2,240 or more selectable frequencies with Mobile App streamlines setup and operation and eliminates complicated menus and Automated setup creates reliable connections with minimal time and effort Preserves every detail of even the most dynamic performances with 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 12 or more hours of operation (up to 8 or more hours of operation with AA batteries Transducer principle pre-polarized condensor microphonePick-up pattern omni-directional, Max. SPL at 1 kHz 130 dB or better, Frequency response 50 to 18,000 Hz or better,Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRPApproved Makes: Sennheiser/Clearone/Televic |
| 911 | Supply, Installation, Testing & Commissioning of Digital wireless handheld Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz or better Bandwidth will allow for up to 90 or more channels Up to 2,240 or more selectable frequencies with Mobile App streamlines setup and operation and eliminates complicated menus and Automated setup creates reliable connections with minimal time and effort Preserves every detail of even the most dynamic performances with 134 dB or better transmitter dynamic range Lithium Ion battery pack delivers up to 12 hours or more of operation (up to 8 hours or more of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL or better, Transmit power (radiated) Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRPApproved Makes: Sennheiser/Clearone/Televic |
| 912 | Supply, Installation, Testing & Commissioning of multi-channel receiver shall be for use with up to four companion transmitters as part of a wireless RF transmission system. The receiver shall operate in the license-free 1.9GHz band (frequency ranges shall be from 1,880 to 1,930MHz or better, depending on country-specific regulations) and shall use automatic frequency management to find and select the best available frequency in the spectrum and to automatically start the transmission.The receiver shall be 4-channel or more version. The receiver shall have a discreet design with fully integrated antennas. With the supplied mounting adapter it shall be mountable to a wall, a ceiling, a tripod or a VESA 100 mount. The receiver shall have two RJ-45 network sockets for power supply (Power over Ethernet: PoE IEEE 802.3af Class 3 or better and remote control via a control software or a media control system. The two or more RJ-45 network sockets shall also output digital audio signals to a Dante™ audio network. The receiver’s AF frequency response shall range from 20 – 20,000 Hz or better. The dynamic range shall be >120dB(A) or better. Total harmonic distortion (THD) at 1kHz shall be typical 0.1% or better. Signal-to-noise ratio shall be >90dB(A) or better. The receiver’s RF sensitivity shall be -90dBm or better. RF output power of the receiver’s back channel shall be adaptive and up to 250 mW. mW EIRPApproved Makes: Sennheiser/Clearone/Televic |
| 913 | Supply, Installation, Testing & Commissioning of wireless microphone charging dock station from the same make as the microphones.Approved Makes: Sennheiser/Clearone/Televic |
| 914 | Supply Install Testing and Commissioning of ceiling mounted microphone array withcoverage area around 35 - 40 sq m or higher, with automatic dynamic beamforming ; with voice lift facilities, exclusion zones, priority zone for fitting into ceiling panel / mountable / flush within ceiling, having 14 or more electret condenser microphone capsules within the same unit or can be mounted separately, with Dante interface 1x RJ 45 socket and 1 x RJ-45 Ethernet Port for PoE and control, sensitivity shall be 0 dBV/Pa (890 mV/Pa) or better andmaximum SPL shall be 97 dB SPL or more, dynamic range shall be 83 dB(A) or better, shall be tested according to UL 2043 rating or better.Approved Makes: Sennheiser/Clearone/Televic |
| 915 | Supply Install Testing and Commissioning of Digital Signal Processor with eight user-configured card slots or higher configuartion. Built-in 4x4 I/O of Dante network audio or better. Integrated license-activated AEC. Dual core processing 40-bit floating or higher. Powered using PoE or included external power supply. Surface mount bracket included. 2ch Mic/Line input or higher with selectable mic, line, mic gain, and phantom power per input. 32-bit or better analog to digital converters. 2ch Line output or better. 32-bit digital to analog converters or better. 2ch input or higher + 2ch output USB audio or better. Software license activated Acoustic Echo Cancellation.8ch of AEC @ 250ms delay / 16ch @ 100ms or better.Approved Makes: Xilica/Bose/Symetrix |
| 916 | Supply Install Testing and Commissioning of Digital SIgnal Processor mainframe with sixteen or higher user-configured card slots . Selectable 48 & 96kHz sampling rates or better. Integrated license-activated AEC. Dual core processing 40-bit floating DSP or better. Front panel OLED display with jog wheel. Rear panel includes an Ethernet module with RJ45 connector and internal power supply connection. 14ch Mic/Line input or higher with selectable mic, line, mic gain, and phantom power per input. 32-bit analog to digital converters. 4ch Line output or higher. 32-bit or better digital to analog converters. 2ch input + 2ch output USB audio or better. Software license activated AEC.8ch of AEC @ 250ms delay / 16ch @ 100ms or better. Approved Makes: Xilica/Bose/Symetrix |
| 917 | Supply Install Testing and Commissioning of Zone with volume controller which shall feature a 1.5-inch OLED display or better with recessed rotary encoder, and should support up to 32 or higher DSP parameters or presets on a single control layer with password protection and any set of levels, toggles, selectors, presets, and/or commands. The display should be capable of displaying icons, symbols, and non-Western character sets, and feature capacitive touch buttons for prompt selection and confirmation. The product should be DHCP-enabled and connect to a network with a standard RJ45 connector over CatX cable. Power should be sourced from an IEEE 802.3af PoE-compliant network switch. The product shall be wall mountable single-gang boxes and fit into a single-module Decora faceplate. The wall control shall be CE marked, and compliant with FCC Part 15:B, RoHS and WEEE regulations.Approved Makes: Xilica/Bose/Symetrix |
| 918 | Supply Install Testing and Commissioning of USB-to-Dante endpoint device shall be capable of up to 2x2 USB audio and provide signal transport over a standard Ethernet network or better. It shall offer Power-over-Ethernet (PoE) to IEEE 802.3af Class 0 standard and support Dante networking using standard CatX cable. The device\"s name shall be configurable to allow for clear identification when selecting a USB device from the host computer. The unit shall provide Bi-directional Device Enumeration as a telephony device and support the Speakerphone profile with and without echo-cancellation, enable two-way volume and mute syncronization with both PC and Mac platforms, and Mute Synchronization with the Microsoft Teams application. The device shall provide a single RGB LED for status reporting, and a tactile button for networkdiscovery and factory reset. The device shall be compliant with CE and FCC Class 15 B regulatory requirements. Approved Makes: Xilica/Clearone/Symetrix |
| 919 | Supply Install Testing and Commissioning of AV Line 24x1G PoE+ 300W 2x1G and 4xSFP or higher Managed SwitchApproved Makes: Netgear/HP/Cisco |
| 920 | Supply Install Testing and Commissioning of 8x1G PoE+ 110W 1x1G and 1xSFP or better Managed Switch Approved Makes: Netgear/HP/Cisco |
| 921 | Supply Install Testing and Commissioning of full range ceiling mounted music and PA loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10 dB) of 85Hz to 19kHz or better; Power handling of 64 Watt peak or higher; Nominal dispersion of 165° Conical or better; Sensitivity of 84 dB SPL or higher and Max SPL of 102 dB SPL peak or better; Nominal impedence of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V or better.The loudspeaker system shall be comprised of a 2.25-inch woofer or better; enclosed in engineered-plastics with integrated steel backcan and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. Shall be packed in pairsApproved Makes: Bose/Tannoy/Martin Audio |
| 922 | Supply Install Testing and Commissioning offull range IP55 rated indoor/outdoor ceiling mounted music loudspeaker. The loudspeaker shall meet the following performance criteria: frequency range (-10dB) of 70Hz to 17kHz or better; Power handling of 160Watt peak or more; Nominal dispersion of >=100° Conical or better; Sensitivity of 88 dB SPL or better and Peak SPL of 110 dB SPL or better; Nominal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V or better. The loudspeaker shall be enclosed in engineered-plastics with integrated steel backcan and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons.Approved Makes: Bose/Tannoy/Martin Audio |
| 923 | Supply Install Testing and Commissioning offull range IP55 rated indoor/outdoor surface mountedloudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 70Hz to 19kHz or better; Power handling of 160 Watt peak or better; Nominal dispersion of 100°(H) × 100°(V) or better; Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better;Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V or better.The loudspeaker system shall be comprised of a 4.5-inch or higher woofer; UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. Shall be packed in pairs with Brackets. Approved Makes: Bose/Tannoy/Martin Audio |
| 924 | Supply Install Testing and Commissioning of integrated high impedence Class D, with Amplifier Poweras 1 x 90 W @ 70/100 V or higher; Frequency Response - 60 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) or better ; THD+N - ≤1 % (at full rated power) or better; Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters- 24-bit / 48 kHz or better; Audio Latency - 10.4 ms - (any input to speaker output or aux output) or better ; Maximum Input Level : +10 dBV or better. 1 balanced page input, I balanced mic/line input, 2 unbalanced line or better; built in loudspaker EQs. Shall include output for expansion amplifier and remote controller (Wired) for source as well as volume control. Approved Makes: Bose/LabGruppen/Powersoft |
| 925 | Supply Install Testing and Commissioning ofintregrated high impedence Class D Dual Zone Amplifier with output power of 2 x 120 W @ 70/100 V or better configuration; Frequency Response - 55 Hz - 20 kHz (+0/-3 dB or better, @ 1 W reference 1 kHz) ; THD+N - ≤1 % (at full rated power); Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters- 24-bit / 48 kHz; Audio Latency - 10.4 ms or better - (any input to speaker output or aux output); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB or better.Maximum Input Level : +10 dBV or better. 1 balanced page/priority input, 3 unbalanced line inputs; built in loudspaker EQs. Shall include output for expansion amplifier and remote controller (Wired) for source as well as volume control. Approved Makes: Bose/LabGruppen/Powersoft |
| 926 | Supply Install Testing and Commissioning of class D amplifier with2x600 W or higher; Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging or better .Amplifier shall havefrequency response of 20 Hz to 20 kHz (+/- 1 dB) or better for LZ mode,with THD+N at rated power less than 0.04% or better.The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz or better.The amplifier shall have2 line-level inputs or better with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) or better for balanced line-level inputs (6-pin Euroblock connector) andpossiblity of4or more no .ofdigital Audio channels. The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier.Approved Makes: Bose/LabGruppen/Powersoft |
| 927 | Supply Install Testing and Commissioning of A 19U Rack with FAN Tray and suffiecient Power SuppliesApproved Makes: Valrack/Dlink/Netrack |
| 928 | Supply Install Testing and Commissioning of A 9U Rack with FAN Tray and suffiecient Power SuppliesApproved Makes: Valrack/Dlink/Netrack |
| 929 | Supply Install Testing and Commissioning of wall plate with 4 or more XLR Ports Approved Makes: RTS/Neutrik/Audac |
| 930 | Supply Install Testing and Commissioning of 2 core 16 AWG/1.5 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliantApproved Makes: Liberty AV/Beldon/Sommer |
| 931 | Supply Install Testing and Commissioningof 2 core Twisted, shielded balanced Audio and control cable with 22AWG or better 7 strand annealed bare copper conductors, Semi-Rigid PVC insulation, Riser rated PVC jacket. UL 444, UL 13 CMR rated Approved Makes: Liberty AV/Aten/Kramer |
| 932 | Supply Install Testing and Commissioning of 2mtr cables to loop discussion microphones and chairman microphones Approved Makes: Brahler/Audio Technica/Televic |
| 933 | Supply Install Testing and Commissioning of 3\" High Speed HDMI with Ethernet cable for 3D, 4K, Deep Color applications and installations, 18.0Gbps Bandwidth to support 4K60 4:4:4, shall Support ARC,and all HDCP levels, HDR Certified by HDMI ATC,RoHS, REACH, and TAA Compliant, Approved Makes: Liberty AV/Lightware/Extro |
| 934 | Supply Install Testing and Commissioning of 6\" High Speed HDMI with Ethernet cable for 3D, 4K, Deep Color applications and installations, 18.0Gbps Bandwidth to support 4K60 4:4:4, shall Support ARC,and all HDCP levels, HDR Certified by HDMI ATC,RoHS, REACH, and TAA Compliant, Approved Makes: Liberty AV/Lightware/Extron |
| 935 | Supply Install Testing and Commissioning of SITC of 25\" High Speed HDMI with Ethernet cable for 3D, 4K, Deep Color applications and installations, 18.0Gbps Bandwidth to support 4K60 4:4:4, shall Support ARC,and all HDCP levels, HDR Certified by HDMI ATC,RoHS, REACH, and TAA Compliant, Approved Makes: Liberty AV/Lightware/Extron |
| 936 | Supply Install Testing and Commissioning of USB 3.1 C to C 6 foot cable that shall support data speed upto 5 Gbps. The cable shall be capable of providing 5A(100W) power output for charging. The cable shall be backward compatible with earlier USB genrations. The cable shall support all USB-C and thunderbolt devices.Approved Makes: Liberty AV/Lightware/Extron |
| 937 | Supply Install Testing and Commissioning of 10\" USB\"A\" Plug (Male) to \"B\" Plug (Male) cable. The cable shall be 3.0 compatable but shall also suport USB 1.1 and 2.0 Approved Makes: Liberty AV/Lightware/Extron |
| 938 | Supply Install Testing and Commissioning of CAT6 CablesApproved Makes: Dlink/Commscope/Molex |
| 939 | Supply Install Testing and Commissioning of required connectors setApproved Makes: Neutrik/Beldon/Sommer |
| 940 | Supplying, fixing, and configuring manageable wireless router with 2.4/5Ghz indoor access point, dual-band 802.11 n/ac, 1750mbps unified wireless access point complete as per specification no. WG-NAS/LAP1 |
| 941 | Supplying, fixing and configuring hardware wireless controller supporting minimum 100 Indoor/Outdoor AP complete as per specification WGNAS/APWC |
| 942 | Supplying, fixing, and configuring 24 ports managed gigabit switch 10/ 100/ 1000 Mbps + 4SFP+ ports & 2X10G RJ-45 ports compliant with IEEE 802.3 af/at standards & supports OSPF/policy based routing/Stacking erected in provided rack complete. |
| 943 | Supplying, fixing, and configuring 48 Ports + 4 SFP combo, layer 2, GB managed ethernet switch, with web view compliant with IEEE 802.3 standards erected in provided rack complete |
| 944 | Supplying, fixing, and configuring 24G PoE ports with 2X10G RJ-45 & 4X10G SFP+ & support stacking, VRRP, OSPF, policy based routing managed layer 2+ PoE switch compliant with IEEE 802.3 standards erected in provided rack complete. |
| 945 | Supplying, fixing, and configuring 20 GE SFP ports + 4 combo 1G ports + 4 10G (SFP+) ports, layer 3 switch, 6kV surge protection on ethernet port and console port for management & support OSPF, BGP, MPLS, policy based routing compliant with IEEE 802.3 standards erected in provided rack complete. |
| 946 | Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP |
| 947 | Supplying and fixing tool-less IO (ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 948 | Supplying and fixing Cat 6, keystone jack RJ-45 information outlet compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 (ethernet) as per specification no. WG-NAS/KJ |
| 949 | Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable with rodent proof and anti termite jacket suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-ncapping as per specification no. WG-ELVC/NC |
| 950 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 951 | Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 μm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC |
| 952 | Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU |
| 953 | Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU |
| 954 | Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & fiber switch/fiber module as per specification no. WG-NAS/MMA |
| 955 | Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification no. WG-NAS/LIU2 |
| 956 | Supplying and plugging 3 m fiber patch cord LC-SC MM (50) OM3 LSZH duplex compliant to IEC 60793/IEC 60794 standards complete as per specification no. WG-ELVC/FPC |
| 957 | Supplying and fixing 1 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of Cat 6 type, compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC |
| 958 | Supplying, fixing, and configuring 10G Base -SR (SFP+) MM transceivercompliant with IEEE 802.3 standards erected in provided rack complete. |
| 959 | Supplying and fixing 22U floor mount rack (Dimension-DxWxH – 800x600x1153 mm) as per specification no. WG NAS/RAK |
| 960 | Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification no. WG-NAS/RAK |
| 961 | Supplying, erecting, testing & commissioning of 2 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. APUPS(Without batteries) |
| 962 | Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries) |
| 963 | Supplying and erecting 12 V/80Ah to 88 Ah Tubular battery with batteryterminal wire, duly charged complete with 36 months warranty complete |
| 964 | 100 Mbps Internet lease line : Highly reliable leased line connectivity to keep your business always online. Our services go beyond just offering high-speed internet. With 100% dedicated bandwidth, we ensure you receive the highest level of performance for your operations.(1 year) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
