|
| 1 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 2 | Portland Cement (OPC-43 Grade) |
| 3 | White Cement |
| 4 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 5 | Anodised Aluminium tower bolt (barrel type) 150x10 mm |
| 6 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 7 | Anodised Aluminium handles 100 mm with plate 150 x 32 mm |
| 8 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 9 | Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5 |
| 10 | Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 |
| 11 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 12 | Circular shape 500 mm dia precast R.C.C. manhole cover with frame- M.D.-10 |
| 13 | White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings |
| 14 | 15 mm PTMT bib cock long body with flange |
| 15 | PTMT pillar cock |
| 16 | PTMT grating 100 mm dia |
| 17 | PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 18 | PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 19 | 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 20 | Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked |
| 21 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 22 | Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked |
| 23 | Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia |
| 24 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia |
| 25 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia |
| 26 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia |
| 27 | Coarse sand (zone III) |
| 28 | Fine sand (zone IV) |
| 29 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 30 | Mirror of superior make glass 60x45 cm |
| 31 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 32 | C.P. Brass bibcock 15 mm |
| 33 | C.P. Brass long body bibcock 15 mm |
| 34 | C.P. Brass angle valve 15 mm |
| 35 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 36 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm |
| 37 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm |
| 38 | PTMT - Waste Coupling 38/40 mm |
| 39 | 1 mm thick 35 mm wide bright finished stainless steel piano hinges |
| 40 | Vitreous china pedestal type water closet |
| 41 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 42 | Vitreous china Indian type W.C. pan of size 580 mm |
| 43 | 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size |
| 44 | PTMT - Towel Rail (600 mm long) |
| 45 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm |
| 46 | Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia |
| 47 | Vitreous china flat back wash basin 630x450 mm |
| 48 | 15 mm C.P. brass tap |
