}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 48005414

    • Tender For For Purchase Of Materials Used In Works In Electricity Distribution Circle, Unnao. - Supply Of Holding Clamp For Pcc Pole 8.5 Mtr. The Clamps Shall Be Fabricated Out Of Tested Quality M.S. Flat Of Size 50 Mm. X 6 Mm By Forging The Clamp Shall B, unnao-Uttar Pradesh

    Madhyanchal Vidut Vitran Nigam Limited has published Tender For For Purchase Of Materials Used In Works In Electricity Distribution Circle, Unnao. - Supply Of Holding Clamp For Pcc Pole 8.5 Mtr. The Clamps Shall Be Fabricated Out Of Tested Quality M.S. Flat Of Size 50 Mm. X 6 Mm By Forging The Clamp Shall B. Submission Date for this Tender is 10-03-2025. Power Distribution Work Tenders in unnao Uttar Pradesh. Bidders can get complete Tender details and download the document.




    Tender Notice

    48005414
    Tender For For Purchase Of Materials Used In Works In Electricity Distribution Circle, Unnao. - Supply Of Holding Clamp For Pcc Pole 8.5 Mtr. The Clamps Shall Be Fabricated Out Of Tested Quality M.S. Flat Of Size 50 Mm. X 6 Mm By Forging The Clamp Shall B
    Tender
    Indian
    Uttar Pradesh
    Unnao
    10-03-2025

    Tender Details

    Tender For For Purchase Of Materials Used In Works In Electricity Distribution Circle, Unnao. - Supply of Holding Clamp for PCC pole 8.5 mtr. The Clamps shall be fabricated out of tested quality M.S. Flat of size 50 mm. x 6 mm by forging The clamp shall be with nuts, bolts and washers. Each clamp must be painted with good quality of red oxide primer. 2 Supply of 11 KV Stay Clamp For 8.5 Mtr Long PCC Pole. The Clamps shall be fabricated out of tested quality M.S. Flat of size 50 mm. x 6 mm by forging. Mild steel used for the clamp shall conform to the IS: 226: 1975. The clamp shall be free from any cracks, joints and burrs. The holes shall be made by punching and these shall be circular and regular and suitable for 16×65 mm.dia bolts. The clamp shall be with nuts, bolts and washers. Each clamp must be painted with good quality of red oxide primer. 3 Supply of 11 KV F-Clamp For 8.5 Mtr Long PCC Pole. The ‘F’ Bracket shall be fabricated out of tested quality M.S. Flat of 50 mm. x 8 mm. size by forging. The second leg shall be properly welded Mild steel used for the clamp shall conform to the IS: 226: 1975. The ‘F’ clamp (Bracket) shall be free from any cracks, joints and burrs. The holes shall be made by punching as shown in the drawing and these shall be circular & regular. Electrodes used for welding shall confirm to IS: 814 (Part-1) 1984 & IS: 815-1974. It shall be ensured that welded joints have the same strength, uniform ribbed surface & absence of external defects such as under cuts, blow holes, surface cracks etc. The ‘F’ Bracket shall be with Nut, Bolts & Washers. Each clamp must be painted with good quality of red oxide primer.

    Key Value

    Document Fees
    INR 1180 /-
    EMD
    INR 10000.0 /-
    Need a Bussiness Loan? Apply Now!
    Tender Value
    INR 10 Lakhs /-
    RBbranding
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    RBTendersdetails2
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail