|
| 1 | CIVIL ITEMS: Providing & Fixing 70mm thick White Sand Stone Mural in Wall with 30-40mm thick deep CNC Cutting design as per drawings & approved by site incharge. |
| 2 | Providing & Fixing metal materials sclupture size 6.50m Length & 2.50m height as per drawings & approved by site incharge. |
| 3 | Providing and fixing in wall / frame structure lining medium 4 mm thick ACP Sheet all complete as per Site-in-Charge |
| 4 | ELECTRICAL ITEMS: Supply & fixing of 7mtr GI octagonal Pole having top dia 70mm, bottom dia 130mm and base plate thickness 16mm and having sheet thickness of 3mm with single arm bracket, base plate 220 x 220 x 16mm, 4Nos foundation bolt 750mm length, Dia 24mm RCC foundation including the cost of foundation, foundationbolts, as required, complete in all respect. |
| 5 | Supply of 28W to 30W AIO Solar streetlight. The streetlight should have minimum system efficacy of 200Lumens/watt and total system output > 5700lumens and made up of Aluminium Extrusion housing. The streetlight should have ingress and impact protections of IP65 & IK08, respectively. Streetlight should have specially designed PC optics with beam angle suitable for road lighting applications. Streetlight should have two indication lights – Green and red showing state of charge for battery i.e. Green light for Charging and red light in case the battery is discharged. Streetlight should also have CRI>70 and CCT of 4000K +/- 300K. The ambient temperature range for fixture should be 0 Degree Centigrade to 50 Degree Centigrade. The type of charge controller used should be MPPT type and must have following protections - Over-Charge protection, deep-discharge protection, Over current protection, Short circuit protection & Over voltage protection. The fixture should work as per dusk to dawn operation and should automatically Switch “ON” during duskand “OFF” on sensing the sunlight during Dawn. Manufacturer of the fixture should have in-house NABL approved testing lab at their manufacturing facility for testing photometry. Light fixture, charge controller, battery and Solar panel should be manufactured in India and Solar panel, MPPT controller and Light fixture should be of Same Make. System should have Solar panel made up of high efficiency Monocrystalline with minimum 60Wp capacity (BIS Approved) and PV modules used must qualify to the latest edition of BIS standards IS14286, IS/ IEC 61730 Part-1 &Part2. Battery should have minimum capacity of 24Ah – 12.8Vand should be made of maintenance free lithium Ferro Phosphate battery (LiFePO4) Battery and should be BIS approved. Battery should conform to the latest BIS/ International standards and IS 16046 part-2 and IS/IEC 16047 part-3 must be submitted. Complete system should be designed to provide 2 days (24 hours) backup in dimming mode by using Intelligent pre- programmed dimming.Following test reports/ certifications to be submitted for technical acceptance of products. |
| 6 | ITC & Operation & Maitainance of above |
| 7 | Supply and fixing of recess/ Surface/ Pendentmounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing |
| 8 | Supply of exterior rated Architectural LED RGB flood lighting luminaire; suitable for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 45W withsystem lumen output should be more than 2700 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing lightwith 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 68 mm±1% including surface mount base , Length of380 mm±1% and Width of 339mm±1% with constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only.. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. |
| 9 | ITC & Operation & Maitainance of above |
| 10 | Supply of exterior rated Architectural LED RGBW Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, Total System wattage not exceeding 24W with system lumen output should be more than 1350 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 81 mm ± 5% including surface mount basewidth 42.8 mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF > 0.90 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be > 80,000hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90°C. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. |
| 11 | ITC & Operation & Maitainance of above |
| 12 | Supply of exterior BIS registered RGBW Flexible LED Strip with 7-8 Watt per meter. LED Strip should have 30Nos LEDs per meter through out the length with the silicon cover with system lumens > 157lms/meter and System Lumen Efficacy > 20lm/w. Standard Length of LED Strip is 5 mtr and it shall be capable of producing dynamic color changing light for with 16 million colors and should be programmable using 8 bit control DMX512 protocol / Ethernet based control. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. DMX enabler circuit should be outside the Luminaire/LED Strip only. LED Strip shall be suitable to operate at an ambient temperature range of -20°C to 50°C. Life time shall be at least L70B50 @ 35000 burning hours at 50°C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF > 0.95 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be > 80,000hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90°C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports.Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. Suitable power supply, decoder etc as required. LED Strip Should be mount with Aluminium Channel for Better Support. |
| 13 | ITC & Operation & Maitainance of above |
| 14 | Supply of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe,2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universeshould be expandable from 2 to 4 DMX512 universes.It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet .Dmx controller should have network controllabilityfeature to control the scene remotely through LAN and triggered via UDP packets on port 2430.Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should haveIntuitive backlit keyboard with 10 presets and also have provision of kepad on devicefor changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. |
| 15 | ITC & Operation & Maitainance of above |
| 16 | Supply of DMX address writer to write automatically address of DMX fixtures. |
| 17 | ITC & Operation & Maitainance of above |
| 18 | Supply, of Instruction forwarder which dedicated to amplify, forward and insulate the signal that comes from the DMX controller When it is connected to the bus of DMX512. long-distance transmission, realize extending the signal transmission distance, Water proof IP65,compatible with various kinds of power range fixture. Seclusion type, total isolation withstand voltage>500v, suitable for long distance transfer or stronginterference environment.External Constant voltage 24V Power supply required to operate the device, DMX Signal is protected from Surge upto 4KV. |
| 19 | ITC & Operation & Maitanance of above |
| 20 | Supply of Instruction forwarder which dedicated to amplify, forward and insulate the signal that comes from the DMX controller When it is connected to the bus of DMX512. long-distance transmission, realize extending the signal transmission distance, Water proof IP65,compatible with various kinds of power range fixture. Seclusion type, total isolation withstand voltage>500v, suitable for long distance transfer or stronginterference environment.External Constant voltage 24V Power supply required to operate the device, DMX Signal is protected from Surge upto 4KV. |
| 21 | ITC & Operation & Maitainance of above |
| 22 | Supply, Installation, Testing and Commissioning of DMX Splitter with Input Voltage range : 190-240V AC, Power Consumption 5W max.Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input.Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per outputchannel. To be provided with IP enclosure if installed in external environment. |
| 23 | ITC & Operation & Maitainance |
| 24 | DMX Programing and Commissioning |
| 25 | ITC & Operation & Maitainance |
| 26 | Supplyof following sizes of power and data cable as mentioned: 3C x 4 sqmm Cu unarmored multistrand |
| 27 | Supplyof following sizes of power and data cable as mentioned: 4 x 16 sqmm Al armoured |
| 28 | Supplyof following sizes of power and data cable as mentioned: Cat 6 data cable |
| 29 | Installation commissioning of following sizes of power and data cable as mentioned: 3C x 4 sqmm Cu unarmored multistrand |
| 30 | Installation commissioning of following sizes of power and data cable as mentioned: 4 x 16 sqmm Al armoured |
| 31 | Installation commissioning of following sizes of power and data cable as mentioned: Cat 6 data cable |
| 32 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-in-charge. 16 Sqmm |
| 33 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In-charge. 16 Sqmm |
| 34 | Supply and burring of Safe Earthing Electrode T-19, (HotDip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFCcapable of reducing the soil resistivity with good mixtureof retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switchboard, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonryhousing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 35 | Supply, Installation, Testing and Commissioning of Feeder Panel - 2 KVA 3 Phase along with01 No. UPS to provide safety / good quality power supply to DMX Controller along with servo stabilizer. |
| 36 | ITC & Operation & Maitainance |
