|
| 1 | Supply ofSolarAIO SinglepieceHighpressureDiecast (LM6Alloy)17WAluminiumhousingappearanceofSolar AIOshallbetraditionalStreetLight, IP65&IK08,suitable for OD 50/60mm bracket, having Min 3000 lumens, suitable for24hrs(2Nights)Autonomyanditsbackupcalculation sheet shall be approved by Consultant Dimming Profile :•From Dusk– First05hourssensorenabled with30% brightness level• Next 05Hours sensor disabled and fixed at 30% Brightness level•Next2hours/dawn-Sensorenabledwith30%brightness levelLithiumpherrophosphate Battery capacity min [email protected] or 256watthour&shallbeoffreshmanufacturedbattery (Not re-used cells) Battery Temp range -20-+60℃and panel capacitymin35Wp,CRI>=70,EfficacyMin>175lm/Wis MUST, system wattage should not be more than 17W ± 5%, ifwattagesincreasesthenthesizeofbattery &panelshall alsobeincreasedinsimilarpercentagetomaintainequal autonomy of the system. Life class of LED System 50000hrs@L70,LEDMake- CREE/ NICHIA/ LUMILEDS /OSRAM. CE Certified, charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15,IEC62093,IEC61347-2-13, IEC62133-02-13, IEC 61000-4-5,EN50530,IEC62384 ThePVmoduleshouldbemadeupof crystallinesilicon solar cells \"Mono-Crystalline\"and musthave acertificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2IEC60598,Operatingtemp0DegreeCto50 Degree C, certifying above givenprameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory, Complete luminaire /battery/panel/charge controllermustbe BIS accredited (If applicable)and asperUPPWDApproved Make as per dierction of E/I.. With five yeart warrenty |
| 2 | Supply & fixing of 7mGI Octagonal Pole of approved make (topdia70mm,bottomdia130mmandbaseplate12mm thick)having3mmthicknesswithsinglearmbracket(1m length) onRCC foundationincludingthecostof foundation, foundation bolts, excavation & back filling and required T&P complete in all respect. |
| 3 | 6 Mtr. Nelson Mandela Pole: - Decorativecasting aluminum pole having cast Aluminiumbase height 1340mm and Minimum bottom size504mm is reducing to top 153mm. The entire base is casted in gravity casting weight not less than 40Kgs. The bottom section of the pole 3000mmx140mmx3.0mm thick and top ribbed section of the pole 3000x114mm dia with base plated 300x300x12mm welded at the bottom of the pole. Pole is having a service window atbottom comprising four way connector andMCB for loop-in & loop-out arrangement. Pole isprimer coating and polyurethane painted in dual shape antique paint with Humidity, IK protection scope of NABL final coat of PU clear. DFT not less than 90 micron. Suitable for mounting single drop down fixture. Design as approved by MVDA |
| 4 | Supply and Fixing of DECORATIVE DROP DOWN FIXTURE FLORENCE DD : Decorative 120 WattLED Drop Down Fixture, made out of aluminium body with mcpcb having LED’s directly mounted on cast aluminium heat sinks. A PC/PMMA Clear / Frosted diffuser is provided for glare free lighting.Fixture isPU/Polysterpainted as approved by Engineer in charge.Fixture efficiency >90%,Efficacy>90 lumen/watt, CRI<80,THD<10%,PF>95%,CCT-CW/WW Humidity, IK protection against electric shock scope of NABLFixture is suitable for hanging/suspension on bracket. equvilant to 120W CW/WW,as approved by MVDA |
| 5 | Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.PWD SOR 2014 S.I. No. 501-I (Havells/ polycab/ grandlay, KEI, Finolax Make). |
| 6 | Supply and fixing of 4 sqmm 2 core flat twin \"AL\" cable complete with labour T&P an dall taxes as per direction by E/I. |
| 7 | S/L of 63 mm DiaDWCHDPEPipe Completewith laying under ground with cartage labour complete in all respect.(Approved Rate) |
| 8 | Double Arm Bracket: - 1000mm long double arm bracket, 900mm over-hang (both Sides)bracket is provided for suspension of decorative lorence Drop Down Fixture. Bracket is made ofMild steel pipe with decorative embellishment. Design as approved by MVDA |
| 9 | Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of theE/Ic.PWD SOR 2017-18 S.I. No. 501-F16 Sq. mm. |
| 10 | Supply and burring of safe earthing electrode T-19 Zn-Zinc coated, length up to 2000 mm., outer pipe 48.4 mm. x 3.2 mm., inner pipe 26.9mm.x2.6 mm., terminal dia. 12 mm., coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of25x3 G.I. strip will be extra). Make : As approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B |
| 11 | S/F of 40Amp. T P N capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contractors HRC fuses, is olating switch Metreing instrument and instrument box with CTS etc in case of TPN compelete in all respect. S.I. no. 807-F PWD SOR 2016 |
| 12 | S/F of MDSI standard and equivalent make 4 amp MCB in J. box as per approved and direction by E/I PWD SOR 2016 S.I. No. 1002 CAT-B |
| 13 | Numbring of Pole with 6\" circule Yellow paint base and number with black paint. |
| 14 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2017-18 S.I. No. 717 |
| 15 | Less 5% as per Govt. Approoval |
