|
| 1 | Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 meter (200 feet). S.I. No. 694 Including all labour, material, T&P etc complete but excluding GST. |
| 2 | Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and Technical Specification. Including all labour, material, T&P etc complete but excluding GST. |
| 3 | Plain/Reinforced Cement Concrete, M 35 Grade in Well Foundation in well curb complete as per Drawing and Technical Specification.Including all labour, material, T&P etc complete but excluding GST. |
| 4 | Plain/Reinforced Cement Concrete M 30 Grade, in Well Foundation in well Steining complete as per Drawing and Technical Specification. Including all labour, material, T&P etc complete but excluding GST. |
| 5 | Providing sleeves nuts of approved design and length in well steining bars including threading of bars and nuts and their fixing as directed by E.I.C. Including all labour, material, T&P etc complete but excluding GST. |
| 6 | Sinking of 4 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. (1) 0.00 meter to 3.00 meter. Including all labour, material, T&P etc complete but excluding GST. |
| 7 | Sinking of 4 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. (2) 3.0 meter to 10.00 meter. Including all labour, material, T&P etc complete but excluding GST. |
| 8 | Sinking of 4 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. (3) 10.00 meter to 20.00 meter. Including all labour, material, T&P etc complete but excluding GST. |
| 9 | Plain/Reinforced Cement Concrete,M 25 Grade in Well Foundation in Plugging the Bottom of well complete as per Drawing and Technical Specification. Including all labour, material, T&P etc complete but excluding GST. |
| 10 | Sand Filling in Wells complete as per Drawing and Technical Specifications.Including all labour, material, T&P etc complete but excluding GST. |
| 11 | Plain/Reinforced Cement Concrete M 25 Grade , in Well Foundation in Plugging the Top of well complete as per Drawing and Technical Specification.Including all labour, material, T&P etc complete but excluding GST. |
| 12 | Plain/Reinforced Cement Concrete M 30 Grade , in Well Foundation in Well Caps complete as per Drawing and Technical Specification.Including all labour, material, T&P etc complete but excluding GST. |
| 13 | Reinforced Cement Concrete M 30 Grade , in Substructure of bridge complete as per Drawing and Technical Specification.Including all labour, material, T&P etc complete but excluding GST. |
| 14 | Furnishing and Placing Reinforced Cement concrete M 35 in RCC slab super-structure including staging and formwork as per drawing and Technical Specification Including all labour, material, T&P etc complete but excluding GST. |
| 15 | Supplying, fitting and placing un-coated Mild steel reinforcement in complete in foundation as per drawing and technical specification. Including all labour, material, T&P etc complete but excluding GST. |
| 16 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical SpecificationsIncluding all labour, material, T&P etc complete but excluding GST. |
| 17 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specificationsIncluding all labour, material, T&P etc complete but excluding GST. |
| 18 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer\"s instructions for installation. Including all labour, material, T&P etc complete but excluding GST. |
| 19 | Supply and fixing of 10 cm internal dia P.V.C. down pipe everest or charminar make or any standard company complete with bands with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls with and including supply of 10 cm long 6 mm dia Nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe. S.I. No. 730(a) Including all labour, material, T&P etc complete but excluding GST. |
| 20 | Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. Including all labour, material, T&P etc complete but excluding GST. |
| 21 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Including all labour, material, T&P etc complete but excluding GST. |
| 22 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Including all labour, material, T&P etc complete but excluding GST. (Labour Only) |
| 23 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including all labour, material, T&P etc complete but excluding GST. |
| 24 | Providing and applying Tack coat with VG-10 Bitumen over Bituminous surface at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic ar per Technical Specification Clause 503. Including all labour, material, T&P etc complete but excluding GST. |
| 25 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including all labour, material, T&P etc complete but excluding GST. |
| 26 | Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Including all labour, material, T&P etc complete but excluding GST. |
| 27 | Bricks (S.O.B) on edge pavement on patries laid and dry, joints filled with local sand including preparation of base to proper slope & its ramming. Spreading layer of 1 cm (3/8\") depth of local sand over the sub-grade and including supply of all materials labour and T&P etc. required for proper completion of the work. Including all labour, material, T&P etc complete but excluding GST. |
| 28 | M-150 brick work in 1:3 cement and coarse sandmortar in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of work but excluding GST.S.I. No. 307 |
| 29 | Supply and fixing of 1000 mm dia Np-3 Hume pipe. Including all labour, material, T&P etc complete but excluding GST. |
| 30 | Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation Including all labour, material, T&P etc complete but excluding GST. |
| 31 | Providing & laying of inverted filter of sand gravel placed under neath boulder pitching including all material labourT&P, etc. required for proper complation of workas per direction of Engineer-in-charge.Including all labour, material, T&P etc complete but excluding GST. |
| 32 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Including all labour, material, T&P etc complete but excluding GST. |
| 33 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification Including all labour, material, T&P etc complete but excluding GST. |
| 34 | Providing and laying of wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per centextra for laps and joints laid with stone boulders weighing not less than 40 kg each Including all labour, material, T&P etc complete but excluding GST. |
