Tender For Lrrp-24-25-Elathur Lac-Sl No-1278--Madathil Mukku Edavanakandy Road-Nanminda Gp-Kozhikode District.-General Civil Work. - Road Work 2 Od448336/2024-2025:Dry Rubble Masonry _ Dry Rubble Without Concrete Levelling Course Masonry With Good Quali, nanminda-Kerala

Tender For LRRP-24-25-Elathur LAC-Sl No-1278--Madathil Mukku Edavanakandy Road-Nanminda GP-Kozhikode District.-General Civil Work. - ROAD WORK 2 OD448336/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 3 12.5.3:Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204<br> For height upto 5 m <br> III. R.C.C grade M 20 4 12.7:Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 5 3.15.2:Compacting Original Ground<br> (ii) Compacting original ground supporting subgrade<br> Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. 6 3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m <br> Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 7 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material 8 75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4) 9 OD455246/2024-2025:Providing and fixing of Direction and Place IdentificationRetro-reflectorised Signs with seven years warrantymanufacturedas per IRC:67 made oftype IV microprismatic grade sheetingfixed over aluminium sheeting, 2 mm thick /aluminium composite material sheet 4mm thick with area not exceeding 0.9 sqm , with suitable back supprting frame of MS angle 40x40x6 and supported onGI Pipe pole 50mm NB -2nos confirming to IS 1239firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concreteminimum size 4ocm x 40cm x 60 cm, 60 cm below ground level including painting all exposed surface with two coats epoxy painting over epoxy primer andas per approved drawing andclause 801 including lettering symbol etc . (Derived form MORD spec 10.3.A.2 )

INR 2760 /-

INR 31771.0 /-

INR 12.70 Lakhs /-