|
| 1 | Provide all materials, labour, T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (2.5x1.8x3.0)m as per departmental type design and drawing (drawing no-D-2) and as per the specifications forcivilwork given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer-in - charge.charges etc complete |
| 2 | Construction of 1.3 m high and 115mm thick boundary wall with 230 mmx230 mm thick pillar made in Brick masonry in 1 cement and 4 sand mortar, the spacing between two pillar should not be more than 3.0 m c/c and the depth of foundation should not be less than 0.60m, at the site of water works as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour T&P etc.for proper completion of work as per instructions of Engineer -in - charge. (Drawing No.D-1) |
| 3 | Supply and fixing of 3.6 m x 1.20 m MS gate including fabrication and supply of steel and construction of bounary wall pillars of size 1.35mx0.23mx0.23m with ornamental brick work 115mm th. around RCC, as per departmental type design and drawing (Drawing No. D-1) and as per specifications laid down in the bid document, including supply of all material,labour,T&P etc.required for proper completion of work as per instructions of Engineer-in-charge. |
| 4 | ConstructionofInterlockingpavement forapproachtowater works, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all materials , labour, T&P etc.required for proper completion of work as per instructions of Engineer -in -charge. |
| 5 | Earth filling work for proper leveling of water work site, in accordance with the contour map and Grid map of existing site enclosed (Drawing no.D-1), including leveling, dressing, excavationandfilling of earth wherenecessaryandalso including all labour, materials, T&P etc.required for proper completion of works and also including carriage of earth from within a distance of about 8 km. from the site of works as per instructions of Engineer -in - charge. |
| 6 | Site clearence and removal of unwanted vegetations, herbs etc from the water works compound and making neat and clean the area withArboriculture works in water works campus complete as directed complete. |
| 7 | Replacement of damaged pipe up to 200mm dia to 63mm dia and cleanig of choacked pipe and required leakage repairing which before and after photographs to be submitted as per approved index plan,approved and executed works shall be 100% verify by AE incharge or all as directed. |
| 8 | Repairing of leakage of pipe line with excavation of earth work in muddy wet soil bailing out of water from tenches cutting of existing main line, repairing of leakage of pipe line with the piese of pipe and specials testing of line refilling of trenches etc. all work complete with labour, material T&P . |
| 9 | 63 mm diaPipe |
| 10 | 75 mm diaPipe |
| 11 | 90 mm diaPipe |
| 12 | 110 mm diaPipe |
| 13 | 140 mm diaPipe |
| 14 | 160 mm diaPipe |
| 15 | 200 mm diaPipe |
| 16 | Making House connection in New/ Existing pipe of indivisual house hold as per Depaertmental type design including supply and fixing of GI Pipe Medium class 15mm dia (1.0 Meter length) and HDPE pipe (Grade P 80) 20mm dia medium quality up to 20 meter length,PVC Saddle,Brass Ferrule,Nipple,Elbow,Socket,Tee and Brass Bib Cock and MTA fittings, connection etc.Complete including dismentling and permanent reinstatement of road surface with all material Labour T&P etc. required for proper completion of wok all as directed by Engineer in Charge |
| 17 | Supply and fixing including transporting of following sizes of sluice valve as per relevant I.S. specification with all specials, jointing and testing etc for completion of a work complete. |
| 18 | 200 mm dia |
| 19 | 150 mm dia |
| 20 | 100 mm dia |
| 21 | 80 mm dia |
| 22 | Construction of Sluice valve chamber (masonry Type) size- 1000 (L) x 1200 (W) x 1300 (H) mm chambers as per department type design and drawing including Heavy duty M.S. Manhole Cover and all materials, labour, T&P etc complete forproper completion of work as per instructions of Engineer -in-charge. |
| 23 | Dismentalling of old PCC surface and making good with 25 mm thick cement concrete floor in 1:1.5:3 (1 cement, 1.5 coarse sand and 3 coarse aggregate) and sub base 75 mm thick PCC with First class brick ballast, local sand and cement in proportion of 1:4:8 all as specified |
| 24 | Dismentalling of old PCC surface and making good 25mm thick 1:2:4 P.C.C. Apron (600mm wide) with cement, coarse sand and 20mm gauge approved stone ballast laid on panels finished with 3mm floating coat of neat cement and 7.5cm thick base concrete consisting of cement, local sand and 1st class brick ballast 4 cm gauge, in proportion of 1:6:12 and removing any over lapping of mortar in the joints of the panels if any and giving them uniform finish including supply of all materials, labour, T&P etc., required for proper completion of work. |
| 25 | Dismentalling of old plywooddoor and Supply and fixing of 32 mm thick plywood doorshutter including Aluminium drop tower bolt, handle, Hinges & stopper etc. including painting complete.All the accessaries should be heavey duty & approved make & quality. |
| 26 | Dismentalling of oldwindow panels Supply and fixing of new window panels including Aluminium drop, tower bolt, handle, hinges and stopper including repair of MS grill etc. including painting complete.All the accessaries should be heavey duty & approved make & quality. |
| 27 | Dismentalling of old plaster and making good 12 mm thick plaster with cement and coarse sand mortar in proportion of 1:4 over brick work including supply of all materials labour, T&P etc required for proper completion of work. |
| 28 | Finishing wall with water proof Apex(oil bound)paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &b supply of all matrials labour T&P etc. required for proper completion of the work. |
| 29 | Repair of stilling chamber |
| 30 | Construction of 100mm wide PCC drain in proportion of 1:2:4 cement, coarse sand and 12 to 20mm stone grit over base concrete in proportion of 1:4:8 cement, local sand and 40mm gauge brick ballast including supply of all materials, labour, T&P etc. required for proper completion of work. |
| 31 | Supply and fixing including dismentalling of old pipe of rain water 110 mm PVC pipe with bend and clamp etc., all complete. |
| 32 | Supply and fixing including dismentalling of cement Jali 30x45 cm at the floor level in the chloronome for proper ventilation. |
| 33 | First class brick work in 1:6 cement, coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc., required for proper completion of the work. |
| 34 | Repair of Bleaching dozer by replacement of electrostatic Pump,PVC Tank, Inlet/outlet piping etc complete |
| 35 | Provide All materials , labour T&P etc. Required for proper completion of work and construct Interlocking Tiles approach road including dismantelling of existing approach road. |
| 36 | Site development by levelling, dressing and campus cleaning, Plantation of flowers, small trees,grouting of bricks on edge as soil protection and developmnt of green grass etc all as directed. |
| 37 | Providing and informatory sign boards in square of rectangular shape of any size 1.50 x 0.90 m. made out 16 gauge (1.6mm) thick mild steel sheet painted with one coat of zinc chromate- stoving primer and to coats green back ground white border/messages, symbols etc.and back side in grey stove enamel paint including M.S. angle frame of 35 mm x 35 mm x 3 mm and two M.S. angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long properly cross braced with angle iron of size 50 mm x 50 mm x 5 mm duly painted with alternate black and white bands of 25 cm width including G.I. fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x60 cm x75 cm including transportation etc. complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. |
| 38 | E&M Work |
| 39 | Drillingof Borehole for Tube well construction by DC/RC/DTH Rig Machine including transportation, erection, dismantling of Rig and associated T&P complete in all respect including required all material labor etc. |
| 40 | DC/RC Drilling up to 100Mtr. |
| 41 | 450 MMØ |
| 42 | 600 MMØ |
| 43 | DC/RC Drilling from 101 MT. To 200 Mtr.Deep |
| 44 | 450 MMØ |
| 45 | DC/RC Drilling from 201 Mtr. To 300 Mtr.Deep |
| 46 | 450 MMØ |
| 47 | DC/RC Drilling from 301 Mtr. To 400 Mtr.Deep& above |
| 48 | 450 MMØ |
| 49 | Tubwell Assembly: |
| 50 | MSERW plain pipe of 7.1 mm thickness ,As per IS 4270(Supply) |
| 51 | 150 MMØ |
| 52 | 300 MMØ |
| 53 | MSERW Pipeslotted pipe of 7.1 mm thicknessasper IS 8110(Supply) |
| 54 | 150 MMØ |
| 55 | Ms Bail Plug 150mm dia as per IS :2800 |
| 56 | 150 mm dia MS ring made by 150mm x 12mm flat |
| 57 | 300 mm dia MS ring made by 175mm x 16mm flat |
| 58 | MS Reducer 300 x150mm |
| 59 | MS SI Clamp 300mm |
| 60 | Tube well Assembly support 300mm |
| 61 | MS Well cap 300 mm dia |
| 62 | MS centre guide for 150mm dia TW Assy |
| 63 | Lowering of above assembly with welding of parts complete in all respect with all requiredmaterial, T&P, labour, etc. |
| 64 | Lowering up to 100 Mtr. Deep |
| 65 | 150 MMØ MSERW Plane/Slotted Pipe |
| 66 | 300 MMØ MSERW Plane/Slotted Pipe |
| 67 | Lowering from 101 Mtr. To 200 Mtr. Deep |
| 68 | 150 MMØ MSERW Plane/Slotted Pipe |
| 69 | Lowering from 201 Mtr. To 300 Mtr. Deep |
| 70 | 150 MMØ MSERW Plane/Slotted Pipe |
| 71 | Lowering from 301 Mtr. To 400 Mtr. Deep &above |
| 72 | 150 MMØ MSERW Plane/Slotted Pipe |
| 73 | Supplying and unconsolidated packing of gravelwith suitable size |
| 74 | Charges for development by 600 PSICompressor including transportation of Air Compressor and T&P up to site with loading/ un loading, Installation and dismantelling etc. |
| 75 | Charges for development of Tube Well by 1 CuSec OP Unit including transportation of Air Compressor and T&P up to site with loading/unloading installation and dismentalling etc. |
| 76 | SITC of Energy efficient AC submersible pumping plant including starter with submersible flat cable of suitable length, main pipe and valves with (08 Nos) Column pipe, distance piece for rising main and by pass side, NRV cum pump and column pipe jointer, Power wiring, chemical earthing, painting wiring of pump house ( Internal & External ) and installation job of pumping plant complete in all respect with all required material T&P, Labour etc. for following duties in grid powered applications. (20 HP 150 mm dia size main piping and valves) |
| 77 | 150 mm Diasize ‐ MS column pipe 3 mtr long as per IS :1239 with necessary packing and Nuts & bolts etc |
| 78 | SITC of Chain Pulley Blocks( Lifting Tackle) 2.0 MT (4.5 M lift) |
| 79 | Tools & Spanners |
| 80 | Electronic dozer of capacity 0 to 6 liters per hour complete with 100 liters dozing capacity plastic tank etc. suitable for proper chlorination up to 0.5ppm and suitable for 600 lpm to 3000 lpm discharge is proposed. Sodium Hypochloride liquid is used in this type of Chlorinator which contains 100 gms of Chlorine in 1000 ml quantityconforming quantity management system standered NSEN ISO 9001-2000. |
| 81 | Supply and fixing of Solar Street light complete with pole in permises. |
