|
| 1 | Facility Management(for the service of service Engineers, Help Desk co-ordinators) Charges as per detailed specification mentioned in the tender document. |
| 2 | AMC Charges:Should be as per Clause No.-3.1 Devices to be included in AMC, of the tender Document.(Note: Price Breakup in this regard must be uploaded as per the provided PDF Format in the Financial Cover) |
| 3 | Devices to be covered under Rate for Bill of Materials (RFBOM) as per specification (Table 2T) of the tender document :CAT6A U/FTP 23 AWG solid, LSZH Sheath, 305 Mtr/Roll : Cat6 A UTP Cable 305Mtr (4 Pairs Individually Foiled Twisted Pair (U/FTP) Cable 23 AWG solid copper conductors with a frequency of 500 MHz) |
| 4 | CAT6 UTP cable, Roll of 305m : Cat6 UTP Cable 305 Mtr (4 Pairs Unshielded Twisted Pair (UTP) Cable Conductor Metal: Solid Bare Copper. 23 AWGcopper wires). |
| 5 | CAT6 UTP RJ 45 Jack box (100 no in a box) |
| 6 | 24-port CAT6 Patch Panel, loaded, 1U |
| 7 | 24-port CAT6 Patch Panel, Unloaded, 1U |
| 8 | 24-port CAT6A Patch panel – Unloaded |
| 9 | CAT6 I/O |
| 10 | CAT6A I/O |
| 11 | Face Plate – Single |
| 12 | Face Plate – Dual |
| 13 | Back Box For Single / Dual Face plate |
| 14 | CAT6 UTP Patch Cord : 1 M |
| 15 | CAT6 UTP Patch Cord : 2 M |
| 16 | CAT6 UTP Patch Cord : 5 M |
| 17 | CAT6A Patch Cord : 1 M |
| 18 | CAT6A Patch Cord : 2 M |
| 19 | CAT6A Patch Cord : 10 M |
| 20 | Layer 3 Stackable 10GbE Switch 24 x 10GbE SFP+ Ports2 x 100/40GbE QSFP28 PortsDual AC PSUs loaded |
| 21 | 8 x 100/1000/2.5GBASE-T PoE ports 2 x 10G SFP+ portsL2 Managed Switch |
| 22 | 24 x 100M/1G/2.5G/5G/10GBASE-T ports 4 x 10/25G SFP28 portsStackable Managed Switch |
| 23 | 24 x 10GBASE-T Ports,4 x 10G/25G SFP28L2 Managed Switch |
| 24 | 24 Port 10/100/1000 Mbps PoE + 4 x 10G Ports Managed switch |
| 25 | 24 Port 10/100/1000 Mbps + 4 x 10G Ports Managed switch |
| 26 | 48 Port 10/100/1000 Mbps PoE + 4 x 10G Ports Managed switch |
| 27 | 48 Port 10/100/1000 Mbps + 4 x 10G Ports Managed switch |
| 28 | 24 Port 10/100/1000 Mbps PoE + 4 x 10G Ports Stackable Managed switch |
| 29 | 24 Port 10/100/1000 Mbps + 4 x 10G Ports Stackable Managed switch |
| 30 | 48 Port 10/100/1000 Mbps PoE + 4 x 10G Ports Stackable Managed switch |
| 31 | 48 Port 10/100/1000 Mbps + 4 x 10G Ports Stackable Managed switch |
| 32 | Dual-band 802.11abgn/ac/axWireless Access Points, 2x2:2 streams (2.4GHz/5GHz) OFDMA, MU-MIMO, support for efficient beamforming,802.3af PoE support. Does not include power adapter or PoE injector. Must be compatible with the existing WiFi controller at NITK and with other controllers (if changed in future). OpenWiFi certified devices are preferred. |
| 33 | Dual-band 802.11abgn/ac/ax Wireless Access Point with Multi-Gigabit Ethernet backhaul and onboard BLE/ZIgbee, 2x2:2 streams (2.4GHz/5GHz) OFDMA, MU-MIMO, support for efficient beamforming, dual ports, 802.3at PoE support.Does not include power adapter or PoE injector.Must be compatible with the existing WiFi controller at NITK and with other controllers (if changed in future). OpenWiFi certified devices are preferred. |
| 34 | Dual-band 802.11abgn/ac/ax Wireless Access Point with Multi-Gigabit Ethernet backhaul, 4x4:4 + 2x2:2 streams, OFDMA, MU-MIMO, support for efficient beamforming, dual ports, PoH/uPoE/802.3at PoE support.Does not includepower adapter or PoE injector. Must be compatible with the existing WiFi controller at NITK and with other controllers (if changed in future). OpenWiFi certified devices are preferred. |
| 35 | Omni, outdoor access point, 802.11ax 2x2:2 streams, support for efficient beamforming, dual band concurrent. One Ethernet port, PoE input. -20ºC to 65ºC Operating Temperature. Includes mounting brackets. Does not include PoE injector.Must be compatible with the existing WiFi controller at NITK and with other controllers (if changed in future). OpenWiFi certified devices are preferred. |
| 36 | Advance Replacement for outdoor AP, 1 Yr |
| 37 | Associate Partner Support for AP Management License |
| 38 | End user support |
| 39 | Multipurpose Secure mounting bracket for Indoor Wireless Access Point. (Supports mounting to hard wall, ceiling, pole or truss, without pad-lock support) |
| 40 | Multipurpose Secure mounting bracket for Outdoor Wireless Access Point. (Supports mounting to hard wall, ceiling, pole or truss, without pad-locksupport ) |
| 41 | Virtual wireless controller license. |
| 42 | Virtual wireless controller Support license, 1 Yr. |
| 43 | AP management license for 1 wireless AP access point. |
| 44 | AP management support license, 1 Yr. |
| 45 | GPON OLT with 4 PON SFP Ports, fully loaded with modules |
| 46 | GPON OLT with 8 PON SFP Ports, 4 GIGA Ethernet Ports, 2 GIGA SFP Portsand 2 GIGA SFP+ Ports, Fully loaded with modules |
| 47 | GPON OLT with 16 PON SFP Ports, fully loaded with modules |
| 48 | XPON ONU Router with 1 PON and 1 Giga Port |
| 49 | XPON ONU Router with 1 PON and 1 Giga Port and 1 FXS port |
| 50 | GPON/GPON ONU 300Mbps WiFi Router with 1PON, 1GE & 1FE, 1FXSPort |
| 51 | GPON/GPON ONU 1200 Mbps WiFi Router with 1PON, 1GE & 1FE |
| 52 | 6U Wall mount Rack with standard internal size & external size with minimum of width:21“ & depth : 23“ with accessories (2 fan tray, cable managers-3 nos, 6 socket power strip, front glass with lock, hardwarepacket) |
| 53 | 9U Wall mount Rack with standard internal size &external size with minimum of width: 21“ & depth : 23“ with accessories (2 fan tray, cable managers-3 nos, 6 socket power strip, front glass with lock, hardware packet) |
| 54 | 12U Wall mount Rack with standard internal size &external size with minimum of width: 21“ & depth : 23“ with accessories (2 fan tray, cable managers-3 nos, 6 socket power strip, front glass with lock, hardware packet) |
| 55 | 15U Wall mount Rack with standard internal size &external size with minimum of width:21“ & depth : 23“ with accessories (2 fan tray, cable managers-3 nos, 6 socket power strip, front glass with lock, hardware packet) |
| 56 | 17U Floor mount rack : 17U Network Enclosure Frame, 600X800 -STEEL, Casters Set of 4, Adjustable Levellers set of 4, Glass Door-600-17U, Metal Door- 600-17U-Vented - Rear, Quantity Side Panels-800-17U-Vented, Horizontal Power Distribution Unit with 6 x 5/15A sockets Round Pin, 230 Volts AC, 32 Amp with Plug, Horz. Cable Manager-1U-Loop, Mounting Hardware-(Pack of 20), Fan-90CFM. |
| 57 | 22U Floor mount rack : 22U Network Enclosure Frame, 600X800 -STEEL, Casters Set of 4, Adjustable Levellers set of 4, Glass Door-600-22U, Metal Door-600-22U-Vented, Side Panels-800-22U-Vented, Mounting Hardware- (Pack of 20), FHU with 2 FAN 180CFM, Horizontal Power Distribution Unit with 6 x 5/15A sockets Round Pin, 230 Volts AC, 32 Amp with Plug. |
| 58 | 42U Floor Mount Rack: Front Glass and Steel Perforated Door Options, Rear Steel Doors With Perforation, Side Panels With Key Locks and Slam Latch, Heavy Duty Caster Wheels With Front BreakOptions, Keyboard Tray Sliding and Rotary, 4 Cooling Fan For Heat dissipation, 100mm vertical cable management in all Corner. |
| 59 | 6 Socket PDU, 5 Amps |
| 60 | Horz. Cable Organiser |
| 61 | Rack mount 19“ 1U 12 Fiber LC type LIU with loaded adapter panel with plates |
| 62 | Rack mount 19“ 1U 12 Fiber SC type LIU with loaded adapter panel with plates |
| 63 | Rack mount 19“ 1U 24 Fiber LC type LIU with loaded adapter panel with plates |
| 64 | 1“ Pvc Conduit Pipe & coupler & clamp ( for open conducting ) |
| 65 | 1.5 “Pvc Conduit pipe & coupler & clamp ( for open conducting) |
| 66 | 2 “ Pvc Conduit Pipe & coupler & clamp ( for open conducting ) |
| 67 | 0.5“ Pvc Casing - Box type |
| 68 | 1“ Pvc Casing – Box type |
| 69 | 1.5“ Pvc Casing – Box type |
| 70 | 2“ Pvc Casing -Box type |
| 71 | 1“ Pvc Flexible Pipe |
| 72 | 1.5“ Pvc Flexible Pipe |
| 73 | 2“ Pvc Flexible Pipe |
| 74 | Grey Channel 3“ -75/75 |
| 75 | Grey Channel 4“ -100/100 |
| 76 | G I PIPE 2“ |
| 77 | Stay Wire ( G I WIRE ) |
| 78 | SC-SC Style Singlemode Duplex patch cord, 3 Mtr. |
| 79 | SC-LC Style Singlemode Duplex patch cord, 3 Mtr. |
| 80 | LC-LC Style Singlemode Duplex patch cord, 3 Mtr. |
| 81 | 1Gbps SFP module, LC Connector, SM |
| 82 | 10Gbps SFP+ module, LC Connector, SM |
| 83 | 1Gbps SFP module, RJ-45 |
| 84 | 10Gbps SFP+ module, RJ-45 |
| 85 | 25GBASE-LR SM SFP+ Transceiver, 10KM |
| 86 | 2 core outdoor armoured OFC, SM |
| 87 | 6 core outdoor armoured OFC, SM |
| 88 | 12 core outdoor armoured OFC, SM |
| 89 | 24 core outdoor armoured OFC, SM |
| 90 | SC pigtails, SM, Simplex, 1 Mtr. |
| 91 | SC pigtails, SM, Simplex, 1.5 Mtr. |
| 92 | LC pigtails, SM, Simplex, 1.5 Mtr. |
| 93 | SC connectors, SM |
| 94 | 1:2 Splitter |
| 95 | 1:4 Splitter |
| 96 | 1:8 Splitter |
| 97 | 1:16 Splitter |
| 98 | 1:32 Splitter |
| 99 | Fiber Distribution Box - small |
| 100 | Fiber Distribution Box - medium |
| 101 | Fiber Distribution Box - large |
| 102 | Fiber termination box |
| 103 | 32mm HDPE pipe (High grade) |
| 104 | Outdoor OFC Joint Kit: support min of 24 core fiber, 2 cable entry ports, each with multi cable capability, vertical type of fiber optic splice clousures.Fiber optic splice closure kit usually includes: end plate, splice tray organiser, fiber splice tray, cover, cable grommets, grommet retainer, mounting bracket, closure mounting & misc.hardware. |
| 105 | Supply of outdoor OFC Joint kit (rectangular) |
| 106 | Supply of OFC cable route marker |
| 107 | Cable dressing both end for marking for UTP cable inividual point wise |
| 108 | 6U - Rack dressing |
| 109 | 9U - Rack dressing |
| 110 | 12U - Rack dressing |
| 111 | 15U - Rack dressing |
| 112 | 17U - Rack dressing |
| 113 | 22U - Rack dressing |
| 114 | 42U - Rack dressing |
| 115 | 42U – Open Rack dressing |
| 116 | 45U - Rack dressing |
| 117 | 6U - Rack Re-dressing |
| 118 | 9U - Rack Re-dressing |
| 119 | 12U - Rack Re-dressing |
| 120 | 15U - Rack Re-dressing |
| 121 | 17U - Rack Re-dressing |
| 122 | 22U - Rack Re-dressing |
| 123 | 42U - Rack Re-dressing |
| 124 | 42U – Open Rack Re-dressing |
| 125 | 45U - Rack Re-dressing |
| 126 | OFC Cable removing |
| 127 | Switch removing |
| 128 | Network rack removing |
| 129 | Jack / Patch panel removing |
| 130 | Laying of 4-Pair, CAT6 / CAT6A UTP Cable, roll of 305 Mtr. |
| 131 | Termination of CAT6 UTP I/O |
| 132 | Termination of CAT6A UTP I/O |
| 133 | Fixing of Face Plate & Back Box |
| 134 | Termination of CAT6 24-port loaded, Jack / Patch Panel, 1U |
| 135 | Termination of CAT6A 24-port loaded, Jack / Patch Panel, 1U |
| 136 | Fixing of Ethernet switch |
| 137 | Configuration of Ethernet switch |
| 138 | Fixing & configuration of OLT |
| 139 | Fixing & configuration of ONU |
| 140 | Fixing & Configuration of Dome camera |
| 141 | Fixing & Configuration of Bullet camera |
| 142 | Fixing & Configuration of NVR |
| 143 | Fixing of indoor wireless access point |
| 144 | Configuration of indoor wireless access point |
| 145 | Fixing of outdoor wireless access point |
| 146 | Configuration of outdoor wireless access point |
| 147 | Crimping of RJ45 Connector |
| 148 | Removing of existing CAT6 cable |
| 149 | Removing of existing PVC Pipe/Cassing |
| 150 | Fixing of 6U Rack with Accessories |
| 151 | Fixing of 9U Rack with Accessories |
| 152 | Fixing of 12U Rack with Accessories |
| 153 | Fixing of 15U Rack with Accessories |
| 154 | Fixing of 17U Rack with Accessories |
| 155 | Fixing of 19U Rack with Accessories |
| 156 | Fixing of 22U Rack with Accessories |
| 157 | Fixing of 42U Rack with Accessories |
| 158 | Label & Test of UTP cable, individual point wise |
| 159 | Laying of OFC |
| 160 | Laying of fiber cables in cable trays, Trenches, plant structures & building walls irrespective of the height. Optical fibre cable with cores up to 48 cores. Supply of cable is not included |
| 161 | Laying of HDPE pipe |
| 162 | Fixing & Mounting of LIU including fixing of adapter panel, dressing, marking |
| 163 | Laying of Conduit Pipe / Casing / Flexible Pipe on trench / false ceiling / tray / wall |
| 164 | Fixing of distribution box - small |
| 165 | Fixing of distribution box - Medium |
| 166 | Fixing of distribution box - Large |
| 167 | Excavation of soft soil for laying of OFC cable |
| 168 | Excavation of hard soil for laying of OFC cable |
| 169 | Excavation of road for laying G I pipe to pass OFC cable (Road cutting for laying of G I Pipe) |
| 170 | Termination / Splicing of OFC cable per core |
| 171 | Installation of OFC cable route marker |
| 172 | OTDR Testing & soft documentation reports of OFC per core |
| 173 | Laying of 40 mm GI pipe, backfilling & finishing after laying (supply of pipe is not included) |
| 174 | Laying of G I Wire with necessary accessories |
| 175 | Marker Tie (Nylon) 20 cm (packet of 100) |
| 176 | Marker Tie (Nylon) 10 cm (packet of 100) |
| 177 | Cable Tie ( Nylon) 15 cm ( packet of 100 ) |
| 178 | Ferrules |
| 179 | TAG 250 MM |
| 180 | Electrical Gum Tape |
| 181 | Roll Plug 6 mm |
| 182 | Screw 1.5” |
| 183 | Anchor Bolt 8 mm |
| 184 | Coupler 1“ |
| 185 | Coupler 1.5“ |
| 186 | Coupler 2“ |
| 187 | Bend 1” |
| 188 | Bend 1.5“ |
| 189 | Bend 2“ |
| 190 | Saddle 1“ |
| 191 | Saddle 1.5“ |
| 192 | Saddle 2“ |
| 193 | T 1\" |
| 194 | T 1.5\" |
| 195 | T 2\" |
| 196 | Elbow 1\" |
| 197 | Elbow 1.5\" |
| 198 | Elbow 2\" Coach Bolt |
| 199 | Numbering of OFC cables Dressing of OFC cables |
| 200 | 1“ Velcro for dressing |
