Housing Urban and Rular Development Government Departments Closing in 0 days TDR #47940852

Special Repairs To Ots Portion, Public Toilet And Other Connected Civil Works In Nonformal And Adult Education Building In Dpi Campus, Nungambakkam, Chennai-6.

Issued by Government Departments · nungambakkam, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Feb 2025
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
nungambakkam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Special Repairs To Ots Portion, Public Toilet And Other Connected Civil Works In Nonformal And Adult Education Building In Dpi Campus, Nungambakkam, Chennai-6.

BOQ

Name of Work : Special Repairs to OTS portion, Public Toilet and other connected Civil works in Nonformal and Adult Education building in DPI campus, Nungambakkam, Chennai-6.
Sl. No. Item Description
1Providing two legged pipe scaffolding using 40mm first class M.S. pipe including fixing cross bracings, couplings, EJP couplers for cross bracing and base plates including erection of scaffolding, conveyance charges, loading and unloading charges and dismantling after completion of the work and removing from the site etc., as directed by the departmental officers.
2Dismantling , removing and carefully stacking RCC etc., complete complying with standard specification and as directed by the departmental officers at site of work.
3Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc.,complete complying with standard specification and as directed by the Departmental officers.
4Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
5Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specification.
6In Ground floor
7In Second floor
8Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
9Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. etc., complete complying with standard specification and as directed by the departmental officers.
10Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
11Flooring with followingDesignedceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
12Dadooing walls with following best approved quality, Designed colour ceramic tilesof size 450x300x6mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
13Supplying and fixing fine polished cuddapah slab of 20/30mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
14Renewing the damagedpaver block with new one of paving and layingthe rubber moulded hydraulic presses paver block inter locked blocks with new one of 63mm thick inter locked blocks of approved quality and make over a sand cushion and laying the paver blocks in true and straight alignment with gradient and pointing neatly using quarry dust of fly ash and pointing neatly hire charges for vibrator machine including diesel consumption charges etc., completecomplying with standard specifications and as directed by the departmentalofficers.
15Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thick in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
16Renewing WPC Door shutter with frame using 100mm x 75mm outer frame and shutter thickness of 35mm with best quality and approved colour and design etc., The Rate inclusive of cost of WPC frame and shutter, labour charges for required size cutting and fixing, furniture fittings such as hinges, tower bolt, aldrop and handle etc., including cost of conveyance, two coat of painting etc., complete and as directed by the departmental officers.
17Renewing and refixing Solid PVC door shutter with frameusing 19 gauge 19mm MS Square tubes for styles and outer frames, 15mm MS Square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture fittings.The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall by 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter.
18Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
19Renewing and fixing Mild Steel Grills for windows and ventilators etc., including the cost of mild steel angles, plates, rods, cost of welding charges and one coat of priming coat etc., complete.(The design should be got approved by the departmental officers.)
20Renewing and refixing the damaged in position of (Powder coated)Aluminium grill of 6mm thick of standard pattern (diamond shape) including \"F\" and \"H\" section using aluminium rectangular section of size 63.50 x 38.10 x 1.28mm @ 0.759 Kg/m for alround and intermediate vertical frame with necessary aluminum clips, rubber beedings etc, including dismantling masonry with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868 / 1962 of anodic film thickness of not less 15 microns (fifteen) for all section etc complete complying with standard specification and as directed by the departmental officers at site of work.
21Renewing and refixing the aluminium door 1/2 glazed and 1/2 panelled using anodized Powder coated matt finish aluminium door with frame made out of 47.62 x 44.45 x 1.18mm for vertical, top, horizontal and middle. Bottom, horizontal made out of frame size 101.60 x 44.45 x 1.20mm and the door panel top 1/2 portion is fixed with 5mm thick plain / glass and bottom half portion fixed with 9mm thick novapan board includng necessary accessories like alumnium clips, rubber beedings, door handle, door closer, furniture fittings, screws etc and also inclusive of labour charges for dismantling the exisitng masonryor RCC works and making holes required with power drill, power consumption charges fixing the door frame and shutter frame in position redoing the dismantled portion to the original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.
22Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works).
23Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mmwithout pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
24Renewing Refixing in position of CP Two way Bib cock with Health faucet with new one ofHealth faucet 15mm dia of approved quality and make including labour charges for fixing in position etccomplete complying with standard specification and as directed by the departmental officers.
25Renewing and refixing in position of SS heavy duty Long body tap of approved quality make to IS Specification(Gross weight shall not be less than 400grams) and quality including cost of shellac, thread etc., complete complying with standard specification and as directed by the departmental officers.
26Renewing and refixing in position of CP Angle Cock Tap of approved quality make conforming to IS Specification(Gross weight shall not be less than 400grams) and quality including cost of shellac, thread etc., complete complying with standard specification and as directed by the departmental officers.
27Renewing and refixing in position18 inch long HDPE connection hose is approved qualityincluding cost of materials etc., complete and as directed by the departmental officers.
28Renewing and refixing in position of32mm dia waste hose is approved quality including cost of materials etc., complete and as directed by the departmental officers.
29Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
30160mm dia PVC pipe
31110mm dia PVC pipe
32Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
33160mm dia PVC Elbow
34160mm dia PVC Bend
35110mm dia PVC Elbow
36110mm dia PVC Bend
37Renewing andlaying and jointingUPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original conditionetc complete complying with standard specification and as directed by the departmental officers at site of work.
3825mm dia UPVC Pipe
3920mm dia UPVC Pipe
40Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
4125 mm Dia Coupler
4220 mm Dia Coupler
4325 mm Dia Elbow
4420 mm Dia Elbow
4525mm to 20mm Reducer
46Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
47Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
48160mm dia PVC pipe
49Supplying and fixing in position Indian make Special Type Mirror of size 1000 x 780mm with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
50Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
51Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works).
52Supplying and applying with one coat Putty over plastered wall surface of first class approved quality including thorough scrapping, clean removal of dirt wherever required etc., complete complying with standard specification.
53Painting two coats of old plastered wall surface with ready mixed interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
54Painting the walls with two coats with first class quality Exterior emulsion paint of approved colour over a priming coat one coat puttyincluding thorough scrapping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries,putty whever required and neat finishing etc. complete complying with std. specification.
55Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
56Collecting the scattered debries from the campus and conveying away the same to ouside by lorry to a lead of 3km (Entirely within city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers.
57Total in Figures

AI Tender Summary

OUR REF NO 47940852
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 27-02-2025
Authority
Authority Name Public Works Department
Work Description Special Repairs To Ots Portion, Public Toilet And Other Connected Civil Works In Nonformal And Adult Education Building In Dpi Campus, Nungambakkam, Chennai-6.
Basic Detail
Tender No TNPWD/53-13/44 M/2024-2025
Bidding Type Tender
Location
City nungambakkam
State Tamil Nadu
Key Dates
Publish Date 25 Feb 2025
Submission Date 27 Feb 2025
Open Date 27 Feb 2025
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 9900
Exemption Not Available
Document List
Tendernotice_1.pdf
BOQ_628585.xls
CONDITION13.pdf
4e012c1e-08d9-4469-a4a7-827ebd40a1cd.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 25, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 27, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 27, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_628585.xls

pdf

CONDITION13.pdf

html

4e012c1e-08d9-4469-a4a7-827ebd40a1cd.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender