Housing Urban and Rular Development Government Departments Closing in 0 days TDR #47937717

Tender For Repair And Maintenance Work In District Commission Building, Jalore - 1 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 2

Issued by Government Departments · jalore, Rajasthan
Tender Value
5 Lakhs
Estimated cost
Bid Submission
27 Feb 2025
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
jalore → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair And Maintenance Work In District Commission Building, Jalore - 1 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 2 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand 3 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 4 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complet Size 600mm x 600mm 5 SS wire gauge 14 mesh x 24 gaug 6 5mm float glas 7 Providing and laying water proofing treatment in sunkenportion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying 8 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). 9 Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding 10 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work 11 Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-char 12 Grading roof for water proofing treatment with water proffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 13 Providing and fixing 12.5 mm thick tapered edge gypsumboard conforming to IS 2095- Part I at all height false ceilingincluding providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised inaccordance with zinc coating of grade 350 as per IS : 277 andconsisting of angle cleats of size 25mm wide x 1.6mm thickwith flanges of 22mm and 37mm at 1200mm centre to centreone flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of anglehanger being fixed with nut and bolts to G.I. channels45x15x0.9mm running at the rate of 1200mm centre to centreto which the ceiling section 0.5mm thick bottom wedge of80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre shall be fixed in adirectionperpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long 14 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 15 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix. 16 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.Thermo-mechanically Treated bars (Conforming of relevent IS code) 17 Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 18 P&FWhiteVitreous ChinaDouble SyphonicEuropean W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556Mark) of 10 litre capacity complete with all necessaryinternal fittings includingcuttingandmakinggood the wall and floor. 19 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 lit 20 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A Decorative teak veneer One side35 MM 21 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors 25 mm dia nominal bore.: 22 15 mm dia nominal bore.: 23 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110 mm 24 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Bend 87 .5 110mm dia 25 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Plain Tee 110mm dia 26 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm 27 P & F Bib Cock (IS:8931 Mark) Superior quality of approved make C.P. Brass bib cock, 15 mm nominal bore.: 28 P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : 29 Gun-metal 15 mm nominal bore. 30 Gun-metal 25 mm nominal bore. 31 & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. 32 C.P. Inlet connection 15 mm Brass (IS:8931 marked). 33 Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 34 Nahni Trap with Jali 4 35 Gully Trap 160mm

BOQ

Name of Work: Repair and maintenance work in District Commission Building, Jalore
Sl. No. Item Description
1Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
2Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand
3Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed
4P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complet Size 600mm x 600mm
5SS wire gauge 14 mesh x 24 gaug
65mm float glas
7Providing and laying water proofing treatment in sunkenportion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying
8Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm).
9Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding
10Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
11Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-char
12Grading roof for water proofing treatment with water proffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13Providing and fixing 12.5 mm thick tapered edge gypsumboard conforming to IS 2095- Part I at all height false ceilingincluding providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised inaccordance with zinc coating of grade 350 as per IS : 277 andconsisting of angle cleats of size 25mm wide x 1.6mm thickwith flanges of 22mm and 37mm at 1200mm centre to centreone flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of anglehanger being fixed with nut and bolts to G.I. channels45x15x0.9mm running at the rate of 1200mm centre to centreto which the ceiling section 0.5mm thick bottom wedge of80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre shall be fixed in adirectionperpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long
14Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats)
15Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix.
16Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.Thermo-mechanically Treated bars (Conforming of relevent IS code)
17Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
18P&FWhiteVitreous ChinaDouble SyphonicEuropean W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556Mark) of 10 litre capacity complete with all necessaryinternal fittings includingcuttingandmakinggood the wall and floor.
19P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 lit
20Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A \"Decorative teak veneer One side35 MM
21P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors 25 mm dia nominal bore.:
2215 mm dia nominal bore.:
23P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110 mm
24P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Bend 87 .5 110mm dia
25P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Plain Tee 110mm dia
26P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm
27P & F Bib Cock (IS:8931 Mark) Superior quality of approved make C.P. Brass bib cock, 15 mm nominal bore.:
28P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :
29Gun-metal 15 mm nominal bore.
30Gun-metal 25 mm nominal bore.
31& F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.
32C.P. Inlet connection 15 mm Brass (IS:8931 marked).
33Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B\" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.
34Nahni Trap with Jali 4\"
35Gully Trap 160mm

AI Tender Summary

OUR REF NO 47937717
AUTHORITY Government Departments
TENDER VALUE 5 Lakhs
LAST DATE 27-02-2025
Authority
Authority Name Public Works Department
Work Description Tender For Repair And Maintenance Work In District Commission Building, Jalore - 1 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 2 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand 3 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 4 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complet Size 600mm x 600mm 5 SS wire gauge 14 mesh x 24 gaug 6 5mm float glas 7 Providing and laying water proofing treatment in sunkenportion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying 8 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). 9 Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding 10 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work 11 Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-char 12 Grading roof for water proofing treatment with water proffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 13 Providing and fixing 12.5 mm thick tapered edge gypsumboard conforming to IS 2095- Part I at all height false ceilingincluding providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised inaccordance with zinc coating of grade 350 as per IS : 277 andconsisting of angle cleats of size 25mm wide x 1.6mm thickwith flanges of 22mm and 37mm at 1200mm centre to centreone flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of anglehanger being fixed with nut and bolts to G.I. channels45x15x0.9mm running at the rate of 1200mm centre to centreto which the ceiling section 0.5mm thick bottom wedge of80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre shall be fixed in adirectionperpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long 14 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 15 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix. 16 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.Thermo-mechanically Treated bars (Conforming of relevent IS code) 17 Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 18 P&FWhiteVitreous ChinaDouble SyphonicEuropean W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556Mark) of 10 litre capacity complete with all necessaryinternal fittings includingcuttingandmakinggood the wall and floor. 19 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 lit 20 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A Decorative teak veneer One side35 MM 21 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors 25 mm dia nominal bore.: 22 15 mm dia nominal bore.: 23 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110 mm 24 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Bend 87 .5 110mm dia 25 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant Plain Tee 110mm dia 26 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm 27 P & F Bib Cock (IS:8931 Mark) Superior quality of approved make C.P. Brass bib cock, 15 mm nominal bore.: 28 P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : 29 Gun-metal 15 mm nominal bore. 30 Gun-metal 25 mm nominal bore. 31 & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. 32 C.P. Inlet connection 15 mm Brass (IS:8931 marked). 33 Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 34 Nahni Trap with Jali 4 35 Gully Trap 160mm
Basic Detail
Tender No NIT No 18 2024-25 Division Jalore
Bidding Type Tender
Location
City jalore
State Rajasthan
Key Dates
Publish Date 24 Feb 2025
Submission Date 27 Feb 2025
Open Date 28 Feb 2025
Finance
Tender Value 5 Lakhs
Tender Fee 500
EMD 10000
Exemption Available
Document List
Tendernotice_2.pdf
Tendernotice_6.pdf
2272f204-49eb-4738-9d90-513cb2f7fb5d.html
Tendernotice_3.pdf
BOQ_807217.xls
Tendernotice_4.pdf
Tendernotice_1.pdf
Tendernotice_5.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 24, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 27, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 28, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_2.pdf

pdf

Tendernotice_6.pdf

html

2272f204-49eb-4738-9d90-513cb2f7fb5d.html

pdf

Tendernotice_3.pdf

xls

BOQ_807217.xls

pdf

Tendernotice_4.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_5.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender