|
| 1 | Construction of Poly house at Fish Farm Alsu Distt. Mandi (H.P) (SH:- Repair & maintenance of Office building at Fish Farm Alsu)(Civil Work.) |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 3 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with adjustable lugs with split end tail to each jambas per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 4 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 5 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws. Second class deodar wood 40 mm thick as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 6 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. Second class deodar wood 40 mm thick as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 7 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete12 mm dia as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 12 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 13 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete 250 mm weighing not less than 280 gms as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completesize of tile 600x600 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 16 | Chequerred precast cement concrete tiles 22 mm {twenty two millimetre}thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm {twenty millimetre}thick bed of cement mortar 1:4 (one cement isto four coarse sand Ordinary cement without any pigment including carriage of material with in allleads and lifts and other incidentals in all heights as directed by the Engineer-in-Charge. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 18 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 19 | Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 20 | Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 21 | Providing and fixing m.s.holder bat clamps of approved design to C.I.or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate20 mm nominal size) and cost of cutting holes and making good the wall etc.100 mm diametre as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 22 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.. |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 26 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 27 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacementn of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 28 | Providing and placing on terrace(at all floor levels ) polyethylene water storage tank, IS : 12701 marked, 1000 ltr capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 29 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete. 110mmx90mm as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 30 | Providing and fixing100 mm diachromium plated grating of superior qualityfor floor,gully/Nahini trap as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 31 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15 mm dia nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 32 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 33 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 34 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipeand making long screws etc. complete (New work) 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat including providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 39 | Providing and fixing600x450 mm beveled edge mirror of superiorglass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 40 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
| 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. |
