Tender For Under 02% Stamp Duty/Infrastructure Development- Work-11- Renovation Of Toilet And Construction Of Interlocking Tiles Behind The Bar Room Located In Tehsil Jewar. - Earth Work In Filling Or In Embankment In Ordinary Soil, Including Remming And , jewar-Uttar Pradesh

Tender For Under 02% stamp duty/infrastructure development- Work-11- Renovation of toilet and construction of interlocking tiles behind the bar room located in Tehsil Jewar. - Earth work in Filling or in embankment in ordinary soil, including remming and dressing the surface to required lev vels including 1.50M. Lift and 5.00 K.M Cartage as directed by the Engineer- incharge. SOR-253(A) 2 Construction of granular sub base by proiding wel graded material, spreding in uniform layours with motor grader on prepared surface, mixing by mix in place method complete as per Specification clause 401 Rate Analysis enclosed 3 S/F of 80 mm thick Interlocking tiles including all complete work 4 Concrete with cement, coarse sand & 40 mm nominal size40 mm Brickballast in proportion of 1:4:8 in foundations including supply of all materials, labour, T&P etc. required for proper completion of the work. 5 R.C.C. work with cement, coarse sand and 20 mm gauge stone ballast in proportion of (1:1.5:3) in Column SOR PWD-283a 6 Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured (@ 10% of Concrete) DSR 5.22.6-20% 7 Painting or varnishingh work in small areas new iran works as si no 8 First Class brick work in 1:4cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of materials, labour, T&P etc. required for proper completion of the work thickness of wall not be less than one brick. SOR PWD-303a+309+310+310a 9 12mm thick plaster with cement mortar in proportion of 1:4 consisting of cement and coursesand (F.M. not less than 2.25 mm) over brick work including supply of all materials, labour, T&P etc. required for proper completion of the work. Pwd 10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. PWD-new item 11 Finishing wall with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied a 1.43 Itri 10 sqm over and including priming coat of exterior primer applied a 2.20 10 sqm) PWD-new item 12 M.S. iron Gate work in heavy sizes such as i/c all complete work. SINO-503 13 Supply and fixing 6mm China white glazed wall tiles laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry joiting and polishing complete including supply of all materials labour and Tools and Plants As per DSR 11.41.2 14 Supply & and fixing vitrifeid tiles (Kajaria, Bell, J&J Somani) in flooring or in skirting or dado laid with 1:3 cement and approved c sand mortar finished with white cement slurry jointing and polishing including supply of all materials Labour T&P etc as per sino DSR 11.41.2 15 Providing and placing on terrace polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrengement and marking necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as per si no21.11 16 Providing and fixing C.PVC complete with fittings and clamps i/c cutting and making good the wall etc for 20mm dia nominal bore.SI no DSR NO-18.21.1.1 17 Same above but for 15mm dia nominal bore Sl no. 18.21.1.2 18 Providing and fixing brass bib cock of approved quality for 15mm nominal bore. Si no 21.10b 19 Providing and fixing 15mm nominal bore c p brass angle valve for wash basin points of appr. si no 21.05.b 20 Providing and fixing 20mm nominal bore brass stop cock ISI marked approved quality as per direction as per si no 21.05.b 21 Providing and fixing 20mm nominal bore brass stop cock ISI marked approved quality as per direction as per si no 21.05.b 22 Providing and fixing White vitereous china wash basin Hundustanware or Equilent including making all connections but excluding the cost of fittings compete as per direction engineer incharge flat back wash basin size 630x450 mm as per si no 21b.16 23 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete 40mm Flexible pipe.as per si no 21b.24 24 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 580x380x350mm with White PVC automatic flushing cistern with fitting standard Size C.P brass Flush Pipe. spreaders with union and clamps (all in CP Brass) with waste fitting as per is 2556, CI trap with outlet gratings and other couplings in CP brass i/c painting of fittings and cutting and makings good the walls and floors where ever required single half stall urinal with 5 liter P.V.C automatic flushing cistern 25 Wiring points with 1.5 sq.mm. p.v.c. insula- copper wire p.v.c. concealed conduit with earth continuity wire inside the conduit using modular switches and socket on modu-lar boards complete in all respect for the following SINO-121B 26 S/F surface / flush mounting 4 ways SPN distribution board (legand lexic) with additonal metal door without MCB complete in all respect as directed at site by engineer as per si no 10220 27 S/F of 15 A/240V power plug with 15A/240V Modular type switches complete as per si no.1139A 28 S/wiring of submain with p.v.c. insulated copper wire in25mm p.v.c. concealed conduit for the fillowing 29 Supply and Fixing LED. Light etc. complete work. 30 P/F 110mm dia P.V.C pipe (6Kg/cm 2 .pressure) of ISI marked approved quality as per direction of engineer in charge asper si no 33iii 31 P/F 75mm dia P.V.C pipe (6Kg/cm 2.pressure) of ISI marked approved quality as per direction of engineer in charge asper si no 33i 32 Add @ 18% GST

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-03-2025	Corrigendum for change in Date and Time	Date	20-03-2025

INR 630 /-

INR 53400.0 /-

INR 5.34 Lakhs /-