Tender For Road signage work at 07 black spots (Nabinagar, Kharaura, Kankari, Thangaon, Muratpur, Khamhariya, Reusa town) in Sitapur district. - Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (Rumble Strip)Kankari 2 Muratpur 3 Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. (Rumble Strip)Kankari 4 Muratpur 5 P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of suraface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streak and holes. Navinagar 6 Kharauha 7 Kankari 8 Thangaon 9 Muratpur 10 Khamhariya 11 Kasba Reusa 12 P/L of hot applied thermoplastic compound 5.00 mm thick i/c. reflectorising glass beads @ 500 gms per sqm area, thickness of 5.00 mm exclusive of surface applied glass beads as per IRC: 35 . The finished surface to be level , uniform and free from streaks and holes. ( Repeated Bar)Navinagar 13 Kharauha 14 Kankari 15 Thangaon 16 Muratpur 17 Khamhariya 18 Kasba Reusa 19 Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminum composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-07 2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure-sensitive adhesive of the aggressive tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS) Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4958-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Altematively, a certificate conforming to ASTM Specification (D) 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer/Client. if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation. installation and incidentals all complete as per direction of the Engineer-in-ChargeInformatry Boards (1200 mm X 900 mm Rectanguler Board)Navinagar 20 Kharauha 21 Kankari 22 Thangaon 23 Muratpur 24 Khamhariya 25 Kasba Reusa 26 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting type IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shal be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International Government Laboratory/ Institute by the manufacture of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends, letters. numerals and borders etc should be as per MORTH specification No-801.37. Proof of the same in form of government report shall be uploaded while quoting tenderCautionary Boards (900 mm Equilateral Triangle Board)Navinagar 27 Kharauha 28 Kankari 29 Thangaon 30 Muratpur 31 Khamhariya 32 Kasba Reusa 33 Intersection informationBoardNavinagar 34 Kharauha 35 Kankari 36 Thangaon 37 Muratpur 38 Kasba Reusa 39 Speed Limit BoardNavinagar 40 Kharauha 41 Kankari 42 Thangaon 43 Muratpur 44 Khamhariya 45 Kasba Reusa 46 Stop Boards (900 mm Octagonal Board)Navinagar 47 Kharauha 48 Kankari 49 Thangaon 50 Muratpur 51 Khamhariya 52 Kasba Reusa 53 Hazzard MarkerKasba Reusa 54 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM 1: 809 as recommended in BS: 873 part 4: 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.Navinagar 55 Kharauha 56 Kankari 57 Thangaon 58 Muratpur 59 Khamhariya 60 Kasba Reusa 61 Trapezoidal HumpProviding and applying tack coat with bitumen VG_10 using Bitumen pressure distributor at the rate of0.30kg per sqm on the prepared bituminous surface cleaned with mechanical broom.Navinagar 62 Kharauha 63 Thangaon 64 Kasba Reusa 65 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Grade-II)Navinagar 66 Kharauha 67 Thangaon 68 Kasba Reusa 69 Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Navinagar 70 Kharauha 71 Thangaon 72 Kasba Reusa 73 P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of suraface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streak and holes.Navinagar 74 Kharauha 75 Thangaon 76 Kasba Reusa
