|
| 1 | Design, Manufacturing and Supply of 2500 A Main LT Panel. fabricated of 2 mm thick powder coated pre painted steel sheet. The bus bar of panel shall be made of high conductive aluminum alloy. The calculation of continuous rating of but bar shall be submitted. The bus bar shall be supported on non hygroscopic SMC/DMC bus bar support on regular intervals. The panel shall be completed in all respect and shall consists of followings. Incomer : 2500A four pole, 50 kA EDO ACB with microprocessor based Over load , short circuit and earth fault protection along with incomer 3 phase metering, lightings, CT. CF etc-1SetOutgoing :1000A Four pole, SOLA EDO ACB with microprocessor based Over load, short circuit and earth fault protection along with lncomer 3 phase metering, lightings, CT. CF etc-1SetOutgoing :800A Four pole, SOLA EDO ACB with microprocessor based Over load, short circuit and earth fault protection along with lncomer 3 phase metering, lightings, CT. CF etc-1SetOutgoing- 250A Four pole 35A MCCB with Over Load, Short Circuit protection, spreaders and extended rotary handle along with outgoing 3 phase metering, lightings, CT, CF etc.- 2SetOutgoing-160A Four pole 25A MCCB with Over Load, Short Circuit protection, spreaders and extended rotary handle along with outgoing 3 phase metering, lightings, CT, CF etc.- 2 SetOutgoing- 63A Four pole 25A MCCB with Over Load, Short Circuit protection, spreaders and extended rotary handle along with outgoing 3 phase metering, lightings, CT, CF etc.- 1Set |
| 2 | Design manufacturing, Supply Installation testing and commissioning of 1000A LT Panel. The Panel shall be fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with Powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus bar of Panel shall be of High grade Electrical grade High Conductive Aluminum alloy of appropriate cross section as per rating. The calculation of continuous rating of Bus Bar shall be submitted. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure bear the jerks of short Circuit as fault level require. The Fault level of Panel shall be 35kA for 1sec. All Indicating Lights shall be LED type and all wiring shall be done from PVC Insulated copper flexible wire. The Panel shall be completed in all respect and shall consist of following material. Incomer : 1000A FP 50ka ACB MDO type with Microprocessor Based O/L, S/C &E/F Protection Release– 1 SetMetering (Incoming ) : Meter Showing all Voltmeter/Ampere & along with, PhaseIndicating Lights, Control MCB etc.- 01 Sets Outgoing : 250A FP, 25kA MCCB with O/L & S/C Protection release along with Extended Rotary Handle &Spreaders– 06 SetOutgoing : 160A FP, 25kA MCCB with O/L & S/C Protection release along with Extended Rotary Handle &Spreaders– 04 Set |
| 3 | supply and making and termination with brass compression gland and sluminium lugs for following size of PVC insulated and PVCsheathed / XLPE Aluminium conductor cable of 1.1 KV grade as required.3.5 core 400sq. Mm |
| 4 | Supply and making outdoor and termination with cast resin compound including lugs and other joining materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kv grade as required. |
| 5 | Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc. as required but excluding sand cushioning and protective covering.185sq.mm and upto 400sq.mm |
| 6 | Earthing with G.I. Earth plate 600mmx600mmx6mm thick including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe of 2.7mtr. long etc. with charcol / coke and salt as required etc. |
| 7 | Providing and fixing 25mmx5mm G.I. Strip on surface or in recess for connections etc. as required. |
| 8 | Supply of 400sq.mm 3.5 core Aluminium conductor PVC insulated armoured cable |
| 9 | S/F of Fire extinguisher ABC type, 6.00 kgs capacity |
| 10 | GST @ 18% |
