Tender For Construction Work Of Community Toilet In Nagar Panchayat Rabupura Ward No. 11 Girls School.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Mar 2025
0 days left
EMD
5380
Bank guarantee accepted
Document Fee
354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rabupura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of community toilet in Nagar Panchayat Rabupura Ward No. 11 Girls School.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation foundation in ordinary soil loam,clay or sand including lift upto 1.5 m. & lead upto 30m including filling watering & ramming of excavated earth into the trenches or in to th plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. ( S.I No-251a) |
| 2 | Concrete with 40 mm gauge Brick ballast fine sand of 1.25 fineness modulous& Cement in proporation of 8:4:1 in foundation and under floor, includingsupply of all material labour and T&P etc. required for proper completition of the work.(S.I. No. 275) |
| 3 | M-150 class Brick work in 1:4 Cement & Fine sandof 1.25 F.M. mortorin foundation & plinth including supply of all materials, labour and T&P etc. Required for proper completion of the work. (S.I No.305) |
| 4 | 12 mm thick plaster with cement and Coarse sand in 1:3 over brick work minimum thickness not be less then 1 cm including supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No.583 |
| 5 | E/W embankment cutting or inembankment inordinary soil,excavation to be in the form regular pits not exceeding 0.50M in depth and earth work in embankment to be in 20cm Layers including remming and dressing the surface to required level and slope and also including 1.5M lift and 10 km lead . The earth from cutting to be use in making embamkment or to be deposite as spoil banks with in5 km distance as directed by the Engineer incharge.Including Royallity as S.I. No. 253(a)+261(b) |
| 6 | R.C.C. Work with cement, approved coarse sand & 2 CM gauge approved stone grit in proportions of 1:1.5:3 in Lighter beam having span Upto 6 M excluding supply of reinforcement and its bending, but i/c its fixing and binding the same with 24 B.W.G.G.I. binding wire and i/c necessary centering and shuttering etc and supply of all materials,labour , T & Petc. required for proper completion of the work i/c cost of binding wire. The rate excludes making of drip course which shall be paid extra.S.I.N.O.285 |
| 7 | M -150 Brick Work with 1:4 (one cement & six fine sand of 1.25 F.M) mortar in super structureincluding supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No.305+309+310. |
| 8 | M.S or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. S.i no-502 |
| 9 | R.C.C. Work with cement, approved coarse sand & 2 CM gauge approved stone grit in proportions of 1:1.5:3 for slab excluding supply of reinforcement and its bending, but i/c its fixing and binding the same with 24 B.W.G.G.I. binding wire and i/c necessary centering and shuttering etc and supply of all materials,labour , T & Petc. required for proper completion of the work i/c cost of binding wire. The rate excludes making of drip course which shall be paid extra. S.I 5.17 NEW ITEM. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. DSR NO. 5.22.1 |
| 11 | Cementconcrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 includingsupply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No. 279(a). |
| 12 | 12 mm thick plaster with cement and Fine sandmortar in 1:6 over brick work minimum thickness not be less then 1 cm including supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No.586. |
| 13 | Add for Extra labour and material for plaster over rough face of one brick wall completion of the work as per S.I. No.596 |
| 14 | Add for extra labour and material for plaster if done celling , T & Petc. required for proper completion of the work as per S.I. No.587 |
| 15 | Making drip coarse in sun shade 1:3 cement and fine sand mortar . NEW ITEM S.I 13.20 |
| 16 | Supply and fixingof6 to 8 mm thick ivory or light shades vitrefied tiles 600*600 mm size in flooring andskirtinglaid with 1:3 cement andApproved Coarse sand mortar finished with white cement slurry, jointing, and polishing complete, including supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No.New item S.I 14.26 |
| 17 | Chequrred precast cement concret tilles 22 mm thick |
| 18 | Supply and fixing 6 mm China white glaged tiles in flooring or in skirting or dado laid with 1:3 cement andApproved Coarse sand mortar finished with white cement slurry, jointing, and polishing complete, including supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I. No.628 |
| 19 | Providing wall putty on New surface with approvl quality material of Berjer J.K, Birla or similar make 02 coatincluding supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I.N.O new item |
| 20 | Finishing wall with water proof cement paint(Weather coat) of approved make and quality on new work with three coat to give an even shade including supply of all materials,labour , T & Petc. required for proper completion of the work as per S.I.N.O. 660+661+662 new item |
| 21 | Supply and fixing of 10 cm internal dia P.V.C. down pipe Everest or charminar make complete with bends with at top and plain at bottom and grantings & supply of necessary M.S. clamp 2.5 cm × 30mm fixed to wall cement mortar 1:2 & i/c supply of 15 cm long 6 mm dia nail all materials, labour , T & Petc. required for proper completion of the work and also i/c repair of lplaster pointing etc. if damaged during fixed of the pipes. as per S.I.N.O. 730. |
| 22 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including paintingof fittings and brackets, cutting and making good the walls and floorswherever requiredW.C. pan with ISI marked white solid plastic seat and lid DSR NO. 17.3.1 |
| 23 | Providing and fixing white vitreous china pedestalwash basin |
| 24 | Providing and fixing white vitreous china water closet |
| 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete. DSR NO. 17.31 |
| 26 | Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizesrespectively with automatic flushing cistern with standard flush pipe andC.P. brass spreaders with brass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and making good the walls andfloors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern DSR NO. 17.4.1 |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank DSR NO. 18.48 |
| 28 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PEComposite Pressure Pipes conforming to IS : 15450, U.V. stabilized withcarbon black having thermal stability for hot & cold water supply, capableto withstand temperature up to 80°C, including all special fittings ofcomposite material (engineering plastic blend and brass inserts whereverrequired) e.g. elbows, tees, reducers, couplers & connectors etc., withclamps at 1.00 metre spacing. This includes testing of joints complete asper direction of the Engineer-in-charge. 1620 (20 mm OD) pipe DSR NO. 18.1.2 |
| 29 | Providing and fixing bress bib cock of approved quality for 15 mm ominal bore as per DSR 18.15.1 |
| 30 | Wiring point with 1.5 Sq mm pvc insulated Single core copper wire in PVC concealed conduit |
| 31 | Supply and Fixixng of Tube light with batten suitable for upto 1x22 watt tube light. |
| 32 | S/Wiring of submain with P.V.C in Sulated copper in P.V.C cancealed conduet. |
AI Tender Summary
Tender Timeline
Feb 21, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 05, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender