Tender For Construction Of Toilet From Nokua Puliya - Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar And Including Stacking Of Materials As Directed Be The Engineer In Charge Within A Distance Of 60Meter (200Feet) 2 Dedut The Cost Of Old , Shamli-Uttar Pradesh

Tender For Construction Of Toilet From Nokua Puliya - Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer in charge within a distance of 60meter (200feet) 2 Dedut the cost of old bricks 3 Ded the cost of old bricks/batts 4 Dismentling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60metre (200feet) 5 Cartage of Ballast kankar coal grit or sand etc including loading and unloading but excluding stackings on pucca roads. Upto 8km 6 RCC work with cement approved coarse sand and 2cm gauge stone grit in proportions of 1:1.5:3 in slab wall etc excluding supply of reinforcement and its bending but including its fixing and binding the same with 24BWG GI binding wire and including neccessary centering and shuttering etc and supply of all materials labour and tool & plants etc required for proper completion of the work including cost of binding wire the rate excludes makings of drip course wihch shall be paid extra. 7 MS (tor or plain) plain work such as rcc or rb work including bending for proper shape and including supply of steel and its wastage bend. Hooks and authorised overlapping shall be measured and including cost of binding wire wastage including supply of all labour material t&p etc required for proper completion of the work 8 M-150 Brick work in 1:3 one cement and four course sand mortar in foundation and plinth including supply of all materials labour t&p etc required for proper completion of the work 9 Cement concrete with 4cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc required for proper completion of the work. 10 4cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (I) graded apprved stone grit laid in panels finished with 3mm (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over but without base concrete. 11 P/L of 12mm thick cement plasterin 1:3 cement & C/sand mortar 12 providing wall putty on new surface with approve quiality material of berger/jk birla or similar mak 2coats 13 Finishing walls with superior quality water proof cement paint/snowcem of approved make and quality of new work with three coats to give even shade including preparing surface by the throughly cleaining and sand preparing and supply of all materials labour and t&p etc. required for proper complete of the work 14 Painting two coat over primer and first coat on new Iron work and other metal surface after paint including preparing the surface with superior synthetic enamel paint all complete 15 steel work welded in built up sections/framed work. Including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings frames guard bar ladder railings brackets gates and similar work 16 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600mm size in flooring and skirting with 1:3 apprved cement and coarse sand morter finished with in its cement clour slurry jointing and polished of approved quiality complete including including supply of all materials labour tools and plants etc required for proper completion of the work as per direction of Engineer in charge. 17 Supply and fixing 6mm ¼ china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools and plants. 18 chequered terrazo tiles 22mm thick with graded marble chips of size up to 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20mm thick bed of cement mortar 1:4 cemen 19 Supplying and fixing rollings SHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull oeration complete but excluding the cost of top cover and 20 Providing and fixing 27.5cm long wire spring grade 2for rolling shutters. 21 Providing and fixing top cover for rolling shutters 2.50 meter wide. 22 Providing and fixing ball bearinf for rolling shutters. 23 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stabilit for hot & cold water supply including all CPVC plaint & brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes 24 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stabilit for hot & cold water supply including all CPVC plaint & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes 25 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stabilit for hot & cold water supply including all CPVC plaint & brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of e 26 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer in charge 27 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer in charge 28 Providing and fixing brass stop bib cock ISI marked approved quiality complete high & low pressure with plastic floats complite as per direction of Engineer in charge High or low pressure with plastic floats. 29 Providing and fixing C.P. brass bib cock of approved quiality confirming to IS 8931 (a) 15mm nominal bore) 30 Providing and fixing C.P. brass long nose bib cock of approved quiality confirming to ISI standards and weighing not less than 810gms (a) 15mm nominal bore 31 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 32 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS 8931 33 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked (sintex or equivalent) with cover and suitable locking arrangement and making neccssary holes for inlet outlet and overflow pipes but without fitting and the base support for tank complete as per direction of Engineer in charge. 34 Providing and fixing water closet squatting pan (indian type W.C. pan) with 100mm sand cast Iron P or S trap 10litre low level white PVC flushing cistern including flush pipe manually controlled device (handle lever) conforming to IS 7231 with all fitting 35 Providing and fixing white vereous cmna back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern with fittings standard size C.P. hrass flush pipe spreaders with unions and clamps (all in C.P. brass) with waste fitting as per 36 Providing and fixing one piece construction white ltreous fhicna squatting plate with an integral longitudinal flushing pipe white pvc automatic flushing cistern with fittings standard size GI pvc flush pipe for back and front flush with standard spreader pipes with fittings GI clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. 37 Providing and fixing wash basin with GI brackets 15mm C.P. brass pillar taps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require vitreous china wash basin size 630x450mm with a pair 15mm c.p brass pillar taps 38 Providing and fixing while vitreus china pedestal for wash basing completely at the back for the reception of pipes and fittings 39 Providing and fixing 8nm dia CP SS Jet with flexible tube upto I metre long with SS triangular plate to european type WC of quiality and make as approved by Engineer in charge 40 Providing and fixing pvc waste pipe for sink or wash including pvc waste fittings complete 32mm dia 40mm dia 41 Providing and fixing 600x450mm beveled edge mirror of superio glass (of approved quiality) complete with 6mm thick hard board ground fexed to wooden cleats with c.p. brass screws and washers complete. 42 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or european type water closet (Anglo indian WC pan) with seat & lid fixed with CP brass hinges and rubber buffers 10 litre low level flushing cistern with fitting and brackets 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good 43 Providing and fixing square mouth S.W gully trap class SP-I complete with gratting brick masonry chamber with water tight CI cover with frame of 300x300mm size (inside) the weight of not less than 2.70kg as per standard design 150x100mm size p type with common burnt clay (non modular) bricks of class-150 44 Supplying and fixing CI cover without frame for manholes 455x610mm rectangular CI cover Light duty the weight of the cover to be not less than 23kg 45 500mm diameter CI cover medium duty the the weight of the cover to be not less than 58kg 46 Providing and fixing toilet paper holder standrad size ISI marked CP brass as per directin Engineer in charge. 47 Sanitary Fitting work…… etc. with AC 48 Electrician fitting work……. Etc. with AC

INR 590 /-

INR 14991.0 /-

INR 4.99 Lakhs /-