Tender For General Fund-2024-2025-Repair And Maintenance Work Of Public Toilet At Ward No.24 Anna Bus Stand Back Side In Karamadai Municipality.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Feb 2025
0 days left
EMD
4950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karamadai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For General Fund-2024-2025-Repair And Maintenance Work Of Public Toilet At Ward No.24 Anna Bus Stand Back Side In Karamadai Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B the site etc.,complete |
| 2 | Removing of existing old indian make water closet including all cost and convenyace of materials and labour charges etc .. |
| 3 | Dismandlingthe existingold floor tilesincluding all cost and convenyace of materials and labour charges etc .. |
| 4 | Dismandlingthe existingold plaincement concrete including all cost and convenyace of materials and labour charges etc .. |
| 5 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 6 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 7 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement including all cost and conveyance of materials and labour charges etc .. |
| 8 | Fly Ash Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification |
| 9 | Plastering with CM 1:5 mix using 12mm thick including cost and conveyance of materials and labour charges etc., complete as per Standard Specification |
| 10 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed |
| 11 | Supply and fabrication of steel rod required for all RCC items of works involved in the schedule cost of steel at site fabrication, labour charges for cleaning the roads straightening, cutting, bending, tying, including over lapping to the required length whereever necessary and placing the reinforcement in position as specified in thedrawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete as per standard specification. |
| 12 | Reinforced cementconcrete 1:1 1/2 :3 mix (One cement, one and a half sand and three aggregate) mix for all reinfoced cement concrete works using 20 mm ISS gauge hard broken grainte machine crushed metal including cost and conveyance of all materials at site including all labour charges for concrete mixing, laying, watering, curing properly but excluding cost of steel and centering etc., complete complying with standard specifications. |
| 13 | Supply and fixing RCC Pre Cast slab 75mm thick in CC 1:2:4 (one cement, two sand and four aggregates) using 20mm HBGS metal excluding cost of Reinforcement grill in position including moulding curing and finishing etc, complete as per standard specification. |
| 14 | Painting two coats of Oldplastered wall surface with ready mixed interior / exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 15 | Manufacturing, Supplying and fixing inposition of Mild Steel Door using outer frames of size 40x40 x6mm and shutters with 18G CRC sheet in center portion and finishing with necessary locking arrangements, painting with primary coat as directed by size 1.20x2.10M = 2.52M2 departmental officer etc. complete. |
| 16 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications- 11/4\"\" PVC PIPE |
| 17 | 11/4\"\" PVC Coupling |
| 18 | 11/4\"\" PVCElbow |
| 19 | 11/4\"\" PVC MTA |
| 20 | 11/4\"\" PVCBALL VALVE |
| 21 | 3/4\"\" COUPLING |
| 22 | 3/4\"\" GI TAP |
| 23 | 4\"\" PVC PIPE |
| 24 | 4\"\" PVC TEE |
| 25 | 4\"\" PVC ELBOW |
| 26 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylumsheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour forPVCOpenlight / fan Point (for electronic regulator) (5 points per coil) SD22 |
| 27 | Supplying andfixing of 18w LED Tub light fittingapproved qulityincluding cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 28 | Supplying andfixing of 48W LED Street Light Fitting with LEDapproved qulityincluding cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 29 | Painting the oldiron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. |
AI Tender Summary
Tender Timeline
Feb 21, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender