|
| 1 | Supply and Fix 18/19mm thick plywood grade BWR type BB, fixed with adhesive and nails as in cubicle cabin,working table,over head rack fixed to walls etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge. |
| 2 | Supply and Fix 12mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin,working table,over head rack fixed to walls etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge. |
| 3 | Supply and Fix 0.90mm thick decorative laminate type I of surface finish of approved colourand pattern consists of combination of twoor more colour, fixedwith approved adhesive as per manufacturers instruction finished to approved size for wall cladding/partition/cubicle cabin/working table of any shape of any pattern and design etc complete all as specified and asdirected by Engineer in Charge. |
| 4 | Supply and fix Cast brass powder coated automatic lock and release system box type butt hinges of size 100mm to 125mm long with decorative fancy typecomplete all as specified and as directed. |
| 5 | Supply and fix Cast brass powder coated Box type decorative door handle of size 100mm long desired as approved pattern complete all as specified and as directed. |
| 6 | Supply and fix IInd class hard wood plain fillets square or rectangular or triangular in section bull nosed, splayed chamfered or rounded on edge or face clean swan of sectional area exc. 6 sqcm and not exc. 13 Sqcm approved design fixed with nails or bradsincluding french polishing over a coat of sealer and wood filler, complete all as specified and as directed. |
| 7 | Supply and fix 19/18 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screwto timber or wooden frame work as approved pattern including taking out old fillets complete all as specified and directed. |
| 8 | Material and labourfor two or more coats ofFrench polishing onwooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete till the desired finish is as approved and obtainedall as specified and as directed. |
| 9 | Supply and fixfor 2 levers brass locks for cup board grade I size 50 mm completeall as specified and as directed. |
| 10 | Supply and fix telescopic channel of size450 mm (when closed) stainless steel pairs chromium plated roller type heavy duty as per sample complete all as specified and as directed. |
| 11 | Supply and fix telescopic channel of size600 mm (when closed) stainless steel pairs chromium plated roller type heavy duty as per sample complete all as specified and as directed. |
| 12 | Supply and fix magnetic door catch of approved pattern conforming to IS all as specified and as directed. |
| 13 | Supply and fix 50mm dia PVC cable manger suitable for working table/conference table of any pattern complete all as specified and as directed |
| 14 | Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 15 | Supply and fix 6mm thick toughened glass pane required colour and size including all necessary hardware fittings for partitions, doors / windows complete all as specified and as directed. Make : Saint gobin/Modiguard |
| 16 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remaining serviceable tiles to stores and rubish off the premises all as specified and as directed. |
| 17 | Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooringfinished rough to reiceve toping complete all as specified and as directed. |
| 18 | Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 19 | Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15 mm thick in CM 1:4 complete all as specified and as directed. |
| 20 | Material and labour for ceramic coloured tiles in vertical surface 600x100/150 mm size of 8 to 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4complete complete all as specified and as directed. |
| 21 | Material and Labour for glossy finish coloured vitrified ceramic tiles 8-10 mm thick of area of each tileexceeding 0.42 Sqm but not exceeding 1.0 Sqm of any shade of any pattern (pattern consists combination of two or more tiles ) as in floor surfaces etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. |
| 22 | Supply and Fix bevalled frameless wall mounted mirror, colour of silver B fixed with wall bolting arrangement of size 600mm x 900mm of good finishcomplete all as specified and directed. |
| 23 | Taking down chowkats or frame exc 1.50 sqm each but not exc 4 sqm each with shutters (without taking off shutters from the frame ) complete all as specified and directed. |
| 24 | Material and Labour for providing Dark colouredfinish UPVC profile casement Doors/ windowsprofile frame consist of high impact modified grade UPVC of 65mm x 73mm (outer frame) and sash of 65mmx105mm, wall thickness of profile must be minimum 1.8±0.3mm, which shall be manufactured from tropicalized blend with TiO2 and required additives, Profile shall be colorfast and conform to standard EN12608, profile sections shall have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber, the thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion and minimum steel reinforcement thickness of 1.2mm to 2.5mm, UPVC casement Doors/windows shall be fabricated with fusion welded corners andconform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted must be stainless steel except handles to be of zinc/Aluminium, alloy casted with powder coated. Glass shall be of laminated(6T+1.23pvb+5T )8mm clear toughened Glass with weather seal (EPDM/TPE). UPVC casementDoors/windows shall be installed by profile manufacturer only, Fame fastener 8x100mm type shall be used complete all specified and as directed by Engineer in Charge.Make: Fenesta or equivalent. |
| 25 | Supply and fix 10mm thick toughened glass crystal polishedin squares exceeding 0.5 Sqm in each pane as in cubile panel/working table top, fixed with suitable adhesive complete all as specified and as directed. |
| 26 | Providing and fixing Powder coated Aluminium work for doors and Partitions walls with extruded built up standard tubular sections/ appropriate & sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/ neoprene felt, etc. Aluminium sections shall be smooth, rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws all complete the direction of engineer-in-charge With powder coated aluminium frame section ofsize 100mm X68.5mm X 2.5 mm thick and shutter sections of size 100 mm X 38.10 mm X 2.5 mm thick ( sectional weight of the Aluminium section should not be less than 4 Kg. for the sectional length of 15) with 12 mm thick both side pre-laminated flat pressed three layer of graded wood particle board conforming to IS: 12823 grade I type II in panelling of partition walls or with float glass panes of 5 mm thickness ( Modi, saint Gobain or equivalent) panelling of required height complete in all respect including all hardware fittings as per the direction of Engineer -in charge |
| 27 | Supply and fix powder coated aluminium frame fordoor,windows,ventilators and partition using standard aluminiumsection one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Glass panel/particle board panel filling shall be measured and paid separately. |
| 28 | Supply and fix Aluminium Powder coated window/ventilator shutter using aluminium section weighing 0.55kg/m, 20mm thick using standard vertical handle section, interlocking section, top and bottom rails, U channels for all -around for gauge shutters. All sections are of medium weight series of approved makein three track sliding window in whichtwo shuttersof with and including of 4mm thick Modi guard or equivalent float glass and one shutter fixed with inclusive ofstainless steel wire mesh of size 0.30mm nominal dia and average with of aperture 1.40mm, including necessary jointing cleats, glazing clips , good quality bearing rollers, Neoprene rubber Gasket and rubber beadingof any type, screws , aluminium fitting such as Gasket, handle (01 Nos on each shutter), interlocking arrangements complete all as specified and asdirected by Engr in Charge. Note: The quoted rate shall be inclusive of 4mm thickfloat glass and Stainless steel wire cloth. |
| 29 | Material and Labour for Granite 18 to 20 mm thick of any type work (table rubbed and polished)in steps, treads jambs, pillars, window- cills, cooking platforms, and similar item of work over and including 15 mm thick backing coat in CM 1:4 complete all as specified. Including pointing in white cement or colour cement(1:2) using marble dust with admixture of pigment to match withshade of granite (including moulding of edges of stone as directed by EIC etc). |
| 30 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed. |
| 31 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 32 | Preparing newly plastered surfaces of internal wall and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and as directed. |
| 33 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces, complete all as specified and directed. |
| 34 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on ceiling surfaces, complete all as specified and directed. |
| 35 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillarsetc, complete all as specified. |
| 36 | Material and labour for precastPCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonryexceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 37 | Material and labour for precastPCC 1:3:6 using 16 mm graded aggregate solid block masonrynot exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 38 | Material and labour for seamless plaster of paris false ceiling comprising of Gl frame work with Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI adjustable strip suspenders up to 1200mm long fixed to roof slab(using concrete drill) by suitable GI fasten with and including panel for ceiling (12mm thick Plaster of Paris board seamless 1200mmx1800mm size) with self-tapping screw finishing covering the joints with fiber tape and ceiling compound 48 mm wide fibre tape to provide seam less finish and surface finish as specified (particular specification 18.2 ) completely all as specified and as directed.Note: The rate is inclusive of frame work, POP panel and surface finish nothing extra shall be paid on this account |
| 39 | Removing excavated material / debris to a distance exc 1.5Km andn.exc 5Km outside MD land, complete all as specified and as directed. |
| 40 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 41 | Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FR) upto and including working voltage 1100volts grade, drawn through and including non metallic rigidPVC conduit not less than 20mm drawn in concealed conduit in wall and open conduiton ceiling including all accessories ISI marked including factory made galvanised modular flush sheet metal enclosure having top bottom side and back wall knock out for conduit entry from any direction suitable to the approved make of switch/socket outlet conforming to IS 14772-2000 and suitable for for cover plates and unsheathed copper conductor stranded cable (FR) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-(a) onelight point controlled by one switch 5 Amps |
| 42 | (b) One 3pin socket outlet 6 Ampson Independent board |
| 43 | Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed. |
| 44 | Supply and fix Modular Switch socket combintation, 3pin, 5 Amps flush type 3 module complete all as specified and as directed. |
| 45 | Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make: Havells /Philips/Bajaj. |
| 46 | Earthing with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized ironsteel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1(using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completionincluding taking out old earthing all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete |
| 47 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. |
| 48 | Supply and fix MCB SPN, 240Volts, 40 to 63 Amps rating 240 V, breaking capacity of 10 KA, \"C\" Curve complete all specified and as directed. |
| 49 | Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommerDouble door, flush to wall complete all as specified and directed . |
| 50 | Raceways / cable duct made from galvanised sheet having height 75mm,width 100mm,3 compartments.Raceways combines with junction boxes,backboxes for wiring devices fixing and coupler accessories conforming to EN 50 085-2-2,compatible with cat 6 structured cabling system,IP-20-IK 08 distributing LV and ELV cabling. |
| 51 | Material and labour for sub main wiring with 2 runs of 6 sqmm FRLS single core multistranded copper conductor PVC insulated andunsheatheddrawn through and including PVC conduit not less than 25mm dia size with all accessories such as bends,Tee, junction boxes, elbow etc fixed to walls/ceiling including 1 run of 6 Sqmm copper (insulated) FRLS cable as earth continuity conductor including complete all as specified and as directed. Note : 3 runs of 6 Sqmm copper cable and one run of PVC casing and caping shall be measured one unit length. |
| 52 | Schedule of Credit (Minus) Rs.4900.00NOTE: Bidder shall insert credit amount of Rs. 4900.00 as ratein Green field under Col-13. |
