Tender For Construction Of 100000 Litre Capacity Sump With Motor At Vengur In Vengur Panchayat Under Assistant Director (Panchayat) Office Fund 2024-25
Tender Value
21.50 Lakhs
Estimated cost
Bid Submission
26 Feb 2025
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruverumbur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 100000 Litre Capacity Sump With Motor At Vengur In Vengur Panchayat Under Assistant Director (Panchayat) Office Fund 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 100000 Litre Capacity Sump with Motor at Vengur in Vengur Panchayat.Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification. |
| 2 | Supplying and filling in basement with filling M-Sand in layer of not more than 15 cm thick well rammed etc., complete |
| 3 | Cement concrete 1:4:8 mix ( one cement four m-sand and eight aggregate)using 40mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying withstandard specfication |
| 4 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X \"3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.(Curved Surface) |
| 5 | Plain Surface |
| 6 | For Circular Column |
| 7 | Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel andbinding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods andbinding wire) |
| 8 | Reinforced CementConcreteofmix1:11/2:3 (Onecement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using20mmsizemachine crushedgranitestone jelly etc., complete. For Below GL |
| 9 | Supply and Fixing of CI Manhole Cover with Frame of Size 0.60m x 0.60m (Heavy duty) with Locking Arrangements as directedby TWAD Board Officers |
| 10 | Supply and fixing ofP.V.C ventilators with wire mesh. |
| 11 | Supplying and fixing RCC ladderinside the sump |
| 12 | Supplying and fixingMSladderout sidethe sump |
| 13 | Providing cut stone set in C.M 1:3 for inlet pipe. |
| 14 | Painting with Plastic Emulsion paint two coats over one coat of priming coat for approved quality including cost and labour charges etc.,complete. For Outside of tank |
| 15 | 80mm GI Elbow |
| 16 | 80mm GM Gate Valve |
| 17 | 80mm GI Coupling |
| 18 | 80mm Flange Set |
| 19 | 80mm GI Pipe |
| 20 | 80mm GI Tee |
| 21 | 80mm MS Clampset |
| 22 | 80mm x 50mm GI Reducer |
| 23 | 50mm GI Pipe |
| 24 | MS Kiosk Box |
| 25 | Pedestal for KIOSK Box |
| 26 | 7.50 HP Open Well Motor |
| 27 | Control Panel Board |
| 28 | 6 Sqmm Sub flat cable |
| 29 | 7/20 Copper wire |
| 30 | 600 x 600 mm Plywood |
| 31 | 63amps fuse unit |
| 32 | 63amps fuse carrier |
| 33 | 32mm GI Pipe |
| 34 | Erection of Motor & Wiring |
| 35 | Solvent Cement |
| 36 | 90mm OD PVC 6KSC PIPE |
| 37 | Provision For Name Board Charges |
| 38 | Provision For Photographic Charges |
| 39 | Provision For MS Hand Rails |
| 40 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Feb 20, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 26, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender