Name of Work: ट्रेनिंग / मीटिंगरूम में पहुंचनेके लिए आईसीयू के बगल से रास्ता विकसित किये जाने वाले कार्य का प्राक्कलन
Sl. No.
Item Description
1
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2
With 40mm nominal size graded stone aggregate.
3
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm)
4
Dark shade pigment with ordinary cement.
5
Brick work with well burnt chimney bricks in bulls patent trench kiln ,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth
6
Cement Mortar 1:6 (1 cement : 6 sand).
7
12 mm cement plaster of mix :
8
1:6 (1 cement: 6 sand)
9
13.46 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
10
Providing and laying 60mm thick factory made cement concretenterlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints withsand etc. all complete as per the direction of Engineer-in-charge.
11
60 mm thick C.C. paver block of M-30 grade
12
providing and laying vitrified floor tiles in different size with water absorption less then 0.08% and conforming to IS : 15622 OF aproved make in all colours and shade in skirting riser of steps laid with cement based high polymer modified .quick sand tiles adhasive (water base)conforming to IS:15477 in average 6 mm thick including grouting of (payment for grouting of joint to be make sepratley..SOR Page no-206 I/11.56.2
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
