|
| 1 | Detail of Work |
| 2 | Safely cartage of PCC/ ST poles(up to13 Mtr.) from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends . |
| 3 | Safely cartage of other complete line material(Except PCC /ST Poles) from ESC, SRE/ JE store to site of work at various sitesincluding loading, unloading at both ends. |
| 4 | Safely cartage of 25 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. |
| 5 | Erection of single support on PCC/ ST poles (up to13 Mtr.)Long with complete fitting of all accessories of11 KV/LT line. complete. |
| 6 | Erection of double Pole on PCC/ ST poles (up to13 Mtr.)Longwith complete fitting with all accessories . |
| 7 | Fixingof 11 KV stay rods by digging of pits in block of 600X600X300 mm. &with new brick and nozzling of stay wire 7/10 SWG and fitting the same on the pole |
| 8 | Concreting of stay rod inratio 1:4:8 with Ist class with brick ballst with cement, sand |
| 9 | Providing and fixingof stone ped 300x300x75 |
| 10 | Earthing of poles by earthing rod. |
| 11 | Providing All TypeMS Clamp for PCC/ST Poles with nuts bolts made of new MS falt 50x5 mm best quality. |
| 12 | Providing ofnuts & bolts of size. |
| 13 | Removel of old weasel/ Rabbit condutor from the Existing 11 KV/LT lines with making roll of condutor and shifting the same to ESC, SRE/JE store including loading and unloading at both ends. |
| 14 | Laying, lifting, Stringing, sagging jumpring & binding ofACSR Weasel Conductor for 11KV/LT Lineincluding complete. |
| 15 | Laying, lifting, Stringing, sagging jumpring & binding ofACSR Rabbit Conductor for 11KV/LT Line including complete. |
| 16 | Laying, lifting, Stringing, sagging jumpring & binding ofACSR Dog Conductor for 11KV/LT Line including complete. |
| 17 | Safe installation of 25 KVA T/F on the double pole with complete fittings including making connections and commissioning. |
| 18 | Fabrication Charges of Angel & Channal. |
| 19 | Concreting ofPCC/STPoleup to 13 Mtr. with cement concreting in block of 600x600x1500 mm in ration 1:4:8 with cement sand and Brick ballast size 1x1.5\" |
| 20 | Fixing of TPMO set complete all accessories. |
| 21 | Chemical Earthing of T/F connecting With G.I Stirp of size 35x4 mm to the complete properly. |
| 22 | Dismantling of exiting PCC/ST Pole after opening of comlete accessories |
| 23 | Off shooting of tree branches touching the 11 KV/LT line. |
