|
| 1 | CIVIL WORK Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . |
| 2 | DismantlingofexistingB.T.Surface(flexiblePavement)toadepthof50mm.manually including loading of dismantled material to transport vehicle at site excluding lead charges |
| 3 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff asdirected all sorts of soils. |
| 4 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. KM 5 |
| 5 | KM 6 |
| 6 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 7 | Construction of granular sub-base by providing close graded material, spreading in uniform layers withmotor grader / Paver on preparedsurface, mixing by mix in place methodwith rotavatoratOMC,andcompactingwithvibratoryrollertoachievethedesireddensity, complete as per clause 401 -- By Mix in Place Method and Grading - II Material |
| 8 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadamspecificationincludingspreadinginuniformthickness,handpackingtoproper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the requireddensity.ByMechanicalMeans-GradingI(UsingScreening TypeA(13.2)mm Aggregate) KM 5 |
| 9 | KM 6 |
| 10 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadamspecificationincludingspreadinginuniformthickness,handpackingtoproper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill upthe intersticesof coarse aggregate, watering andcompacting withvibratoryroller tothe requireddensity. By Mechanical Means - Grading II(Using Screening Type B (11.2mm) Aggregate) KM 5 |
| 11 | KM 6 |
| 12 | Providingandconstructing50mm.thickModified PenetrationMacadam(MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting)heatingandsprayingthe [email protected]/Square Metre, spreading 12mm.size chips compacting withstatic roller having weight 8 to 10 MT. to achivethedesireddegreeofcompactionasperTechnicalSpecificationClause506 etc. complete. IncludingpickingofexistingWBMsurface.(VG-30bulkbitumenratesare considered to arrive at rates) KM 5 |
| 13 | KM 6 |
| 14 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutexcludingprime/tackandSealcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) KM 5 |
| 15 | KM 6 |
| 16 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2Kilogram/Sq.m,preparing existing road surface by mechanical means, spreading chipsandrolling,bystaticrollerhavingweight8to10MT.etc.complete.(VG-30bulk bitumen rates are considered to arrive at rates) KM 5 |
| 17 | KM 6 |
| 18 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm.Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 daysand sustained reflectivity RL of 100 mcd/sqm/lux and Qd of 100 mcd/sqm/lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performancefor IRC 35:2015). |
| 19 | SupplyingandFixingofMoldedShankRaisedPavementMarkers/Cat\"sEye madeof polycarbonateandABSmouldedbodyandreflectivepanelswithmicroprismaticlens capableofprovidingtotalinternalreflectionofthelightenteringthelensfaceandshall supportaloadof16000KilogramtestedinaccordancetoASTMD4280TypeHand complying to Specifications of Category A of MORTHCircular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 20 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 750 mm made out of 2 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( TypeIVHighintensitymicro-prismaticgradesheeting-HIP)havingpressuresensitive/heat activatedadhesiveretoreflectivespecifiedbackground,borderandbacksideretoreflctive symbols,letters,numerals,arrowasperIRC:67-2012TableNo8.3Supportedwithback support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one Number ofM. S. angle iron post of size65 mm X 65 mm X 6 mm,3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75cmincludingtransportationetc;complete.ClassB(TypeIVHigh intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warrantycertificate inoriginalshouldbesubmittedtotheEngineerinchargebythe contractor/supplier. |
| 21 | ProvidingandfixingRoadjunction/Informationsignboardofsize0.90mx0.60m. preparedon16gaugeM.S.sheetwithangleironframeofsize35x35x5mmincluding painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post inonepiecewithoutjointsincludingalltaxes,conveying,fixingingroundwithcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. |
| 22 | Providingandfixingboarddisplayinginformation,suchas\"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 23 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 800mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 andcuring etc. complete. |
| 24 | CD WORK Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 25 | Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto1.50m)ByMechanical Means |
| 26 | Providing & laying in situ cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. With crushed sand . |
| 27 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retainingwallsetc.includingnecessaryformwork,compaction,finishingandcuringetc. complete.(withreversibledrumtypemixer/concretebatchmixplant(panmixer) withSCADA |
| 28 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 andcuring etc. complete. |
| 29 | Providing cast in situ / ready mix block of M10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing andcuring etc. complete.(withreversibledrumtypemixer/concretebatchmixplant(panmixer) with SCADAwithfineagreegatesofrequiredspecifications ( Natural sand / VSIsandfinelywashedetc), cement 4.40 bags/cumt) |
| 30 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. |
| 31 | Providing andlaying insitu/ready mixM-25controlledcementconcrete oftrap/granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing,formwork,centeringandfinishingincementplasterexcludingreinforcement etc. complete. (with fully automatic micro processor based PLC withSCADA enabledconcrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra.iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. |
| 32 | Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 33 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
