Tender For Improvement To Kopara Chatari Road Vr 88 Total Length 3.50Km In Part 1/00 To 2/850, Tq.- Umarkhed, Dist.- Yavatmal
Tender Value
55 Lakhs
Estimated cost
Bid Submission
05 Mar 2025
0 days left
EMD
55000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
umarkhed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Kopara Chatari Road Vr 88 Total Length 3.50Km In Part 1/00 To 2/850, Tq.- Umarkhed, Dist.- Yavatmal
BOQ
| Sl. No. | Item Description |
| 1 | Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete |
| 2 | DismantlingofexistingB.T.Surface(flexiblePavement)toadepthof50mm.manually including loading of dismantled material to transport vehicle at site excluding lead charges |
| 3 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff asdirected all sorts of soils. |
| 4 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders/Rubbleandstackingthebrokenmetaletc.complete.(Priorapprovalofsamplestackof brokenmetalbytheEx.Engineerisnecessarythedateofapprovalwillformpartofthe measurements)a)40 mm Metal, By breaking Boulders (Hand broken). KM 2 |
| 5 | KM 3 |
| 6 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. KM 2 |
| 7 | KM 3 |
| 8 | Supplying soft murum at the road site, including conveying and stacking complete. KM 2 |
| 9 | KM 3 |
| 10 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 11 | Spreading80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 12 | Compactingthesubgrade/gravel/sizemetal(100mm loose)layersforallwidthswith Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificialwatering complete. |
| 13 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewithvibratory roller including artificial watering etc. complete. |
| 14 | Providingandconstructing50mm.thickModified PenetrationMacadam(MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting)heatingandsprayingthe [email protected]/Square Metre, spreading 12mm.size chips compacting withstatic roller having weight 8 to 10 MT. to achivethedesireddegreeofcompactionasperTechnicalSpecificationClause506 etc. complete. IncludingpickingofexistingWBMsurface.(VG-30bulkbitumenratesare considered to arrive at rates) KM 2 |
| 15 | KM 3 |
| 16 | Providingandconstructing50mm.thick Modified PenetrationMacadam(MPM)road surfaceincluding allmaterials,preparingthe existingroadsurface,spreading 40mm.stone layersmetal30% crusherbrokenmetal+70%Handbrokenmetal(BybreakingRubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75Kilogram/ Square Metre, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compactionas per TechnicalSpecificationClause 506 etc.complete,includingapplyingtackcoatofbitumen0fspecifiedgradeattherateof 0.30KilogramSquare Metre.(on existing bitumen surface.) KM 2 |
| 17 | KM 3 |
| 18 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutexcludingprime/tackandSealcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) KM 2 |
| 19 | KM 3 |
| 20 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2Kilogram/Sq.m,preparing existing road surface by mechanical means, spreading chipsandrolling,bystaticrollerhavingweight8to10MT.etc.complete.(VG-30bulk bitumen rates are considered to arrive at rates) KM 2 |
| 21 | KM 3 |
| 22 | ProvidingandfixingRoadjunction/Informationsignboardofsize0.90mx0.60m. preparedon16gaugeM.S.sheetwithangleironframeofsize35x35x5mmincluding painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post inonepiecewithoutjointsincludingalltaxes,conveying,fixingingroundwithcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. |
AI Tender Summary
Tender Timeline
Feb 18, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 05, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender