|
| 1 | AAAC Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.) |
| 2 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 3 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 4 | 11 KV D.O. Fuse Unit Polymer type |
| 5 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 6 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 7 | XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts |
| 8 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 9 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 10 | 11 KV Strain hardware (T&C type) fittings |
| 11 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 12 | 63 KVA Conventional Distribution Transformers,BIS Certified Level-II (Old)/Level-I(New). |
| 13 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 14 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 15 | Carpet guarding |
| 16 | Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor |
| 17 | M S Channel 100X50x6 mm |
| 18 | M S Angle 65X65X6 mm |
| 19 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 20 | Transformer mounting Channel (100X50x6 mm.) |
| 21 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 22 | D.O.Mounting Channel 75x40x6mm |
| 23 | Stay set 20 mm. complete without Stay wire (Painted) |
| 24 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 25 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 26 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 27 | Concreting of structures & foundation (1:3:6) |
| 28 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 29 | Red oxide paint |
| 30 | Aluminium paint |
| 31 | Danger Boards Enamelled 11 KV |
| 32 | Aluminium Binding wire and tape |
| 33 | M.S.Nuts with Bolts |
| 34 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 35 | Stay set complete without Stay wire 16 mm. (Painted) |
| 36 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 37 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 38 | Complete jumpering of DTR |
| 39 | Bi-metallic clamps Distribution Transformers Bushing |
| 40 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 41 | L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.) |
| 42 | G.I. STRIP 25X3 MM1 |
| 43 | G.I.Pipe 40 mm Dia C grade type |
| 44 | Bentonite compound powder |
| 45 | Galvanized nut & bolt with washer |
| 46 | Labour charge for company side material |
| 47 | Labourcharge for contractor side material |
| 48 | GST 18% |
