Tender For Construction Of Village Library Building At Ezhil Nagar In Krishnasamuthiram Panchayat Under Special Assistance For Construction Of Public Libraries 2023-24
Tender Value
22 Lakhs
Estimated cost
Bid Submission
25 Feb 2025
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruverumbur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Village Library Building At Ezhil Nagar In Krishnasamuthiram Panchayat Under Special Assistance For Construction Of Public Libraries 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Village Library building at Ezhil Nagar in Krishnasamuthiram Panchayat.Earthwork excavation and depositing on bank with initial lead and lift in hard gravelly soil for foundation etc. complete. |
| 2 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials to site and labour charges etc. complete. |
| 4 | Brick work with cement mortar 1:5 mix using country bricks of size 83/4\"x41/4\"x2\" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete. |
| 5 | Filling with Collected Gravel including all labour charges etc. |
| 6 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Below Ground level) |
| 7 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Above Ground level) |
| 8 | Supplying, fabricating and placing in position mild steel or ribbed to steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete. |
| 9 | RCC 1:1.5:3 using 20mm HBG metal including cost and conveyance of materials and labour charges etc. complete |
| 10 | Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and cons |
| 11 | Finishing the top of the roof with one course of Machine PressedTiles of size 23 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement us including all charges etc. |
| 12 | Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly compl |
| 13 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complete |
| 14 | Paving the floor with design antiskirt ceramic tiles (colour and shadeasdirected)ofsize 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand)20mm thick laidin situ and pointed with samecoloured cement. |
| 15 | Plastering with Cement Morter 1:3 mix 10 mm thick inculding cost and conveyanceof all materials to site and labour charges for curing etc |
| 16 | Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete. |
| 17 | Painting two coats with Interior Emulsion & Exterior Emulsion using best quality of Emulsion, Brushs, scaffolding charges etc. complete |
| 18 | Painting two coats over new iron work using synthetic enamel paint including cost and conveyace of all materials to site etc. complete. |
| 19 | UPVC VentilatorSpecification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethesizeofouterframe 60mm x 58mm and shutter profilesizeof60x78mmboth profilesarereinforcedwith |
| 20 | UPVCWindow Specification:Supplyingand fixing UPVC (Un-Plasticized PolyvinylChloride)Windowsof casementtype(open)fromthe profilethesizeofouterframe 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosionfree,theprofilesare multichamberedsectionswith wallthickof2mm.TheEPDM rubber (black colour) covered with over all the edges of frame andshuttertheshutterwillbe provided with Espag multi power point locksandalsoit operates as handle. The corners and joints should be welded and cleaned.Radiations freepin headedplainorbrowncolour glass 4mm thick should be providedtotheshutterandit should not allow leakage of water even at most ranging storms and should have key lockableaction,security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism betweensashandouterframe that enables opening of the window. Thewindowshould be fixed to the wall with 100% packing with screws and silicon packing allroundtheframes. Thewindowshouldbegot approved from the Executive Engineerbefore use on work (PWD SOR 2020-2021, P.No 65) |
| 21 | SupplyandfixingofM.SGrills withDoorsandWindowswith one coat of Red oxide with Primerincludingallcostssuch aswelding,grindingand fabrication charges, cost and conveyanceofallmaterialsto siteetc,completeasperstandard specification. |
| 22 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds,otherclamps, screwsnailsetc.,complete complyingwithstandard specification. The rateis inclusiveofcostofremovable iron gratings of appropriate size. ThesizeofTeakWoodplugs usedis150X25mminfront& 200x75mminrear(wallside)with a depth of 110mm. The pipe istobefixedbymeansof\"U\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 23 | SupplyandfixingofPVCSolid Doors using 19gauge 19mm MS Sq,tubesforstylesandframes, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mmthickSolidPVCsheets. Shutterusing5mmthicksolid PVCsheetsforpanellingshall rigidly fixed in positionincluding furniture and fittings. The over all sizeofstylesshallbe50mmX 30mm.Theoverallsizeoftop rail,Lockrailandbottomrail shallbe75mmX30mm.The overallsizeofframesshallbe 50mm X 45mm with suitable tabateforhousingtheshutter etc,completeasperstandard specification. PWD SOR Pg. No.49 Sl.No.122 a |
| 24 | SupplyandfixingofStainless steel (Salem stainless steel) Door frame (Box sectionusing stainlesssteelplateof1.6mm thick)ofsize100mmX60mm witharebateof30/35mmX 15mm on one side of the frame including supplying and fixingdovetailsplayedendstainless steel holdfast etc. |
| 25 | Supplying & fixingdoor shutters for MediunDensity FiberBoard of exterior grade 35 mm thick,single leaf conformingto IS:12406/1989with35x12mm T.W.Lippingonalledgeswith necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding costoffurniturefittings.suchas 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2Nos,and1No.Doorstopperetc complete. |
| 26 | Manufacturing, Supplying and Fixing of Stainless Steel Hand railsforstaircaseusing50mm dia304LGradeStainlessSteel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mmdiaintermediate horizontal stainless steel pipe of 1.60mmthickinbetween.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plateencasedinthebase concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding,polishing, conveyance,electricalcharges,etc. complete |
| 27 | Earthling as per ISI Specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than40mm andwith20mmdia copper earth flat of size 125mm x50mmx6mm,withfunneling arrangementusingcharcoal, common salt, G.I.reducer, check nuts etc.,and masonry work and providing RCC cover slab 38mm thick for the Brick masonry includingcostofsteeland fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (SD 233) |
| 28 | Supplyingandrunoff8SWG copperwireonwallsorbelow groundlevelwithnecessary\"U\" nails, earth work excavation and refilling & including the cost of all materials etc.,completeinall respects as directed by thedepartmental officers.(SD 75) |
| 29 | Supplying and Fixing of 3 Phase DBwithMCB12wayTPMCB sheetsteeldistributionboards (flush type/surface type) fitted withbusbarsandneutrallinks with three phase MCB outgoings and separate 4 way provision for accommodatingOneNo.4pile incoming MCB / Isolator and anotherseparate4way provisionforaccommodating OneNo.4poleELCB/RCD (totally 8 ways inone segment) (3x4waysineachsegment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with labelholderetc.completeinall respects as directed by the departmental officers |
| 30 | Supply and run off 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cableof1100VgradewithISI markconfirming to IS:694/1990 with continuousearth connection by means of 1.50 sqmPVCinsulatedsinglecore unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wallfor mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddlesandlabouretc., complete in all respects as directed by the departmentalofficers. (derived from SD 55) |
| 31 | Supplyandrunoff2of1.5 sqmm PVC insulated single coreunsheathedcopper conductor cable of 1100 V grade with ISI markconfirming to IS:694/1990 with continious earthconnectionbymeansof1.50sqmPVCinsulatedsingle coreunsheathedcopper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed inwall formainsincludingthe cost of PVC pipes and specials, cables,cement,brassscrews,T.Wplugs,saddlesandlabour etc., complete in all respects as directedby thedepartementalofficers. (derived from SD 54) |
| 32 | Supply and fixing of TNEB meterBoardsuitablefor32A Three phase service connection with 32A fuse unit(500V)32A neutrallinkandearthlink(1\"x 1/8\" Copper flat) on T.W plank of size600mmx450mmx19mm with supportingT.W.reepers of 1\" thick oneither sider with painting withsuitable bolt and nuts for fixingtheTWplankonwall withearth connection and interconnection with 7/20 PVCinsulatedcopperwirefromEBmeter to fuse unit. SD 127) |
| 33 | Supplyandrunof4core16 Sq.mm PVC Armoured cableof 1100VgradewithISI mark.(PWD SOR PG no 125) |
| 34 | Wiringwith2x1.5sqmm(22/0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall andceilingwithPVC accessories inflush with wall with 3mmthickhylumsheetcover with TW switch box and 5A F.T. switch with continuous earth wire connectionof 14 SWG TC wire for making good of the concealedportionwithsuitable colour for PVC Concelaed light point / Fan point (For Electronicregulator). SD 23 |
| 35 | 18WLED3000KRoundType Recessed Fitting with LED |
| 36 | Supplyandfixingof1200mm (48\")sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod |
| 37 | Supply and fixing of 400mm Sweep-wall mount fan |
| 38 | Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable colour for open PVC plug point.- SD -38. |
| 39 | Supplyingandfixinginposition bestqualityP.V.Csoil/ waste pipes(6KSC)ofvarioussizes havingISImarkandproviding leakproofjointsincludingfixing to the wall with P.V.C/ M.S clampsetc., andmaking connection to all sanitary fittings,dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the originalcondition,complyingwith standard specifications.(D) |
| 40 | Supplyingandfixinginposition white / colour glazed European WaterClosetofbestqualityand approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mmdia/PVCpipeof110mm dia, double flappedrigid PVC black seatandseatcoverwithCPbrass hingesincludingcostofwhite cement,cementforpacking,spun yarn, teak wood plugs, brass screws, etc.,includingsupplyingandfixing 10literscapacityPVC/12.5liters capacityporcelinlowlevel flushing tank with a pair of CI brackets, etc., completewithallfittingssuchas 15mm brass ball valve with polythenefloatwithbrasshandle, union, coupling connected by meansof40mmwhitePVCflush hand using Indian adopter jointincluding all internal fittings..... |
| 41 | Provision for Water Supply Specials (TWAD Rate) 1000 ltr PVC tank |
| 42 | Tap |
| 43 | Mirror |
| 44 | 4\" PVC Pipe |
| 45 | 4\" Elbow |
| 46 | 4\" Tee |
| 47 | Wash Basin Colour |
| 48 | 3/4\" PVC Pipes |
| 49 | 3/4\" Elbow |
| 50 | 3/4\" Tee |
| 51 | 1\" PVC Pipes |
| 52 | 1\" Elbow |
| 53 | 1\" Tee |
| 54 | 1\" Gate Valve |
| 55 | 2\" PVC Pipes |
| 56 | 2\" Elbow |
| 57 | 2\" Tee |
| 58 | 2\" Gate Valve |
| 59 | Providingrainwaterharvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a heightof30cmeachsupplying andfabricating16No.of6mm dia MS rod vertically and 3 No. of 6mmdiaMSrod circumferentially tied together with18guagebindingwirefor wellringsincludingnecessary earth work excavation 1m dia to adepthof1m,supplyingand filling 40mm HBG inside the erectedwellringtoadepthof 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cmspacingsonbothdirections and one 6mm M.S rod ties at the edgeoftheslab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth withallinitialleadsandliftsin places as shown by the Departmentalofficersetc., |
| 60 | Provision for Leachpit arrangements |
| 61 | Provision for Name Board |
| 62 | Provision for Photo Charges |
| 63 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Feb 18, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender