|
| 1 | Drilling of 150 mm dia T/W bore suitable for 110mm dia pipe/200mm dia T/W bore suitable for 140 mm dia pipe all complete with labour T/P as per direction of engineer incharge (Jal Nigam) |
| 2 | Supply and lowering of 110 mm dia 6kg/cm2 PVC pipe/140mm dia 10kg/cm2 with plastic net cover slots of pvc pipe by UPIN(phenolex or apb by E/I) all complete (ISI mark only) SOR 2017-18 (Jal Nigam) |
| 3 | Supply and pouring of pee gravels suitable for T/W bore all complete as per direction of engineer incharge (Jal Nigam) |
| 4 | S/F of 110mm PVC pipe adopter suitable for item no. 2 (Jal Nigam) |
| 5 | Supply of 2 HP submersible pump set with starter UPIN 65m head ( Pluga/Crompton Greeves/KSB) (GEM) |
| 6 | Supply and fitting of 4sqmm 3 core copper wired submirsible cable (ISI mark) complete in all respect (Jal Nigam) |
| 7 | Supply and lowering of 40 mm dia ribbed screen Ashirvad PVC pipe (ISI marked)/ 32 mm dia G.I. Pipe by UPIN and fixed with boat site threaded SS nipple all complete.(Jal Nigam) |
| 8 | Transportation of all material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material with the diging the pit of boring work including supply all labour T&P with with arrangement of water required etc all complete.(Jal Nigam) |
| 9 | Installation of 2.00HP submersible motor pump with 32mm G.I. Lowering, submersible cable 4sqmm & installation of starter including supply of labpur, T&P etc complete in all respect(Jal Nigam) |
| 10 | Devlopment of bore hole till the discharges of water become free from sand and turbidity by compression and disinfection of bore including supply of all labour T&P(Jal Nigam) |
| 11 | Chemical & bacteriological testing of water sample(Jal Nigam) |
| 12 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (SI No. 725(A)) |
| 13 | Supply and fixing of one number 8 to 6 SWG G.I.Wire in 15 mm dia G.I. pipe for ear thing ,laid in ground or in wall duly concealed including the cost of cement ,sand .lab our , T&P other material required for proper completion of the work as directed at site. (SI No. 721) |
| 14 | S/F of 25mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects. (DSR 1547) |
| 15 | S/F of 32mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects. (DSR 11.6.1) |
| 16 | Providing, laying and fixing 50mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc (DSR 18.8.4) |
| 17 | Supply of 150 LTR. capacity Usha model No. SS 150150 with refrigerator R-22 having cooling capacity 150 Ltr. with extra large stainless steel body with water tap 2 no. complete in all respects. (S.I. No. N.S.) |
| 18 | Supply of 4 KVA Copper Wound stabilizer range 140-280 with plug top complete in all respects.(S.I. No. N.S.) |
| 19 | Supply and fixing of 63 Amp. 415 volts TPN metal clad rewirable type switch fuse unit on angle iron bracket complete in all respects. (S.I. No. 316) |
| 20 | Installation and commissioning of water cooler including comnnection complete in all respects. (S.I. No. N.S.) |
| 21 | Construction of 2MX1.5MX2.10M water cooler cage made out of 50X50X5mm MS angle iron with 10 SWG welded wire mesh of size 1”X2” galvanized GI sheet of 24 SWG on roof top and side to protect the cooler from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concrete base and brick work in 1:6:12 and 4mm thick and plaster 1:2:4 plainincluding Painting with Aluminium paint.The job include supply of all materials, labour T& P required for proper completion of work. (Appd.) |
| 22 | Supply and fixing of wash out pipe of 40 mm dia G.I. pipe for wastage water drain from water cooler.(S.I. No. Civil DSR 1554) |
| 23 | Supply and fixing of brass stop cock of approved make complete in all respects.(S.I. No. Civil DSR 7260) |
| 24 | Supply and fixing of 15 mm dia G.I.Pipe complete with G.I. fitting including all materials labour etc.(S.I. No. Civil DSR 1545) |
| 25 | Supply and Fixing of brass ferrule with C.I. mouth cover including 15 mm dianorminalboring and tapping the mains complete in all respects.(S.I. No. Civil DSR 225) |
| 26 | Supply and fixing of power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box includingsupply of all material, labour T&P etc. required for proper completion of work. (S.I. No. 1139 A) |
| 27 | S/F of 6 Amp to 32 Amp.DPMCB (10 KA) C curve Cat A (SI No. 1002) |
| 28 | S/F of 6 Amp to 32 Amp.DPMCB (10 KA) C curve Cat A (SI No. 1009) |
| 29 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat A (SI No. 1022A) |
| 30 | Supply and laying of G.I. pipe including labour T&P etc complete in all respect.(a) 65 mm dia (Civil DSR 18.12.7) |
| 31 | Supply and laying of G.I. pipe including labour T&P etc complete in all respect. (a) 100 mm dia (S.I. No. DSR 14.13.3) |
| 32 | Supply and hosting of sintax or equivalent high density polythylene seamless of piece mould tank complete in all respect |
| 33 | Dismentling of S.T. Pole 9.5 mtr Long (S.I. No. 616 LR) |
| 34 | S/F steel tubular pole 9.5 meter long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in al respects. (S.I. No. 616) |
| 35 | S/F of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator(S.I. No. 621) |
| 36 | Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. (S.I. No. 622) |
| 37 | Supply and erection of \"D\" clamps of 50 mm × 6 mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (S.I. No. 623) |
| 38 | Tightening of O/H lines with ACSR conductor on poles including binding &jumpering complete in all respects(S.I. No. 627 LR) |
| 39 | S/E of O/H lines with ACSR conductor on poles including binding &jumpering complete in all respects(S.I. No. 627) |
| 40 | S/E of O/H lines with G.I. Wireon poles including binding &jumpering complete in all respects(S.I. No. 628) |
| 41 | S/E of hexagonal / cradle type gaurd of G.I. wire no. 8 to 4 SWG including binding etc./ five line spacer between ACSR conductor complete in all respects.(S.I. No. 629) |
| 42 | S/E of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects.(S.I. No. 631) |
| 43 | Painting of pole with 2 coats of Aluminum paint over Red Oxide primer complete in all respects. (S.I. No. 634) |
| 44 | Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110 to 130 watt. Confirming to IP 65 and above protection complete in all respect. CAT.AAA(S.I. No. 23.17) |
| 45 | S/F of 500 Amp. 415 Volt heavy Duty Double Break HRC Fuse type metal clad TPN complete with HRC Fuse etc. on angle iron frame complete in all respect. (S.I. No. 350) |
| 46 | Labour charge for dismentling / fixing of LED street light 110 to 130 Watt (S.I. No. 1424 LR) |
| 47 | S/F of Potted driver set for LED s suitable for LED light(S.I. No. N.S.) |
| 48 | S/F of single protected device (SPD) for LED light (S.I. No. N.S.) |
| 49 | S/f of 100 Amp metal clad TPN type switch fuse unit complete with rewirable type fuse on angle iron bracket complete in all respects CAT.B (S.I. No. 328 ) |
| 50 | Supply and fixing of Copper Cable 4.0 sq. mm. 5 core (S.I. No. 289 C) |
| 51 | Supply and fixing of automatic street light cubicalcontrol panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect 25 A TPN(S.I. No. 807 e ii) |
| 52 | Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110 to 130 watt. Confirming to IP 65 and above protection complete in all respect. CAT.AAA(S.I. No. 13.26) |
| 53 | Labour charge for raising lowering and other rectification of High Mast (S.I. No. 652 LR) |
| 54 | Supply and fixing of palm or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.(i) 16 sqmm(SI No. 504 d) |
| 55 | (ii) 50 sqmm (SI No. 504 g) |
| 56 | (iii) 95 sqmm (SI No. 504 i) |
| 57 | (iv) 150 sqmm (SI No. 504 l) |
| 58 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.(i) 16 sqmm 4 core (SI No. 503 c) |
| 59 | (ii) 50 sqmm 31/2 core (SI No. 503 l) |
| 60 | (iii) 95 sqmm 31/2 core (SI No. 503 p) |
| 61 | (iv) 150 sqmm 31/2 core (SI No. 503 q) |
| 62 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16sqmm 2 core (SI No. 20 a.1.3) |
| 63 | (ii) 16sqmm 4 core (SI No. 20 a.1.9) |
| 64 | (iii) 50 sqmm 31/2 core (SI No. 20 a.1.12) |
| 65 | (iv) 95 sqmm 31/2 core (SI No. 20 a.1.14) |
| 66 | (v) 150 sqmm 31/2 core (SI No. 20 a.1.16) |
