Auction Sale Of Lot No: Ws/Ayma/66/02/24-25/Bg/Cond./4W/8W/Wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond/4W/8W/Wgn. Without Contents If Any. 1) Se 10079670806 Boxnm1 (Nlb) 2) Se 10079560787 Boxnm1 (Nlb) 3) Ne 30048960080 Bcnm1 (Nlb) 4) Cr, Kharagpur-West Bengal

Auction Sale Of Lot No: Ws/Ayma/66/02/24-25/Bg/Cond./4W/8W/Wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond/4W/8W/Wgn. Without Contents If Any. 1) Se 10079670806 Boxnm1 (Nlb) 2) Se 10079560787 Boxnm1 (Nlb) 3) Ne 30048960080 Bcnm1 (Nlb) 4) Cr 30018962595 Bcnm1 (Nlb) 5) Sc 25099460795 Boxnr (Nlb) Steel Body 6) Sc10099508097 Boxnm1 ( Nlb-01 & Wm- 01 ) 7) Se 10079560510 Boxnm1 (Wm) 8) Cr 30018962229 Bcnm1 (Wm) 9) Se 93077360009 Mboxn (Uic) 10) Cr 85019460311 Bvzc. Nb: (1): I) Wagons Are To Be Sold Without 11 Nos. Nlb Trolleys Against Srl. No. 01 To 06 -01. Ii) Wagon To Be Sold With 05 Nos. Wm Trolley Against Srl No. 06 -01 To 08 . Iii) Wagon To Be Sold With 02 Nos. Uic Trolley Against Srl No. 09. Iv) Wagon Serial No. 01 To 09 To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve,Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower Etc And Other Excluded Fitting As Per Latest Excluded Fitting List* V) Wagon Serial No. 10 To Be Sold Without 02 Nos. R/B Wheel Sets , Axle Box Cover Plate , Bg Spring And Brake Gear With Lever Pull Rod Etc . As Per Latest Fitting List . *( It Contains No Trolley )* *Excluded Fittings List Letter No. M2/C-19/E.Ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour,Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/Vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (B) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (Subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (C) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. ?Purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (D) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/Wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (E)The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/Fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (Railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /Cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Refer document

Refer document

Refer document