Tender For Construction Of Creche Room At Zonal Office -8, Pulla Avenue In Dn-101,Unit-23,Zone-8
Tender Value
17.34 Lakhs
Estimated cost
Bid Submission
20 Feb 2025
0 days left
EMD
17400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pulla → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Creche Room At Zonal Office -8, Pulla Avenue In Dn-101,Unit-23,Zone-8 => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing brick or stone masonry work in cement mortar under 3m high including carefully clearing the debris etc. complete. |
| 2 | Supplying, fabricating and placing in position Ribbed tor steel (RTS) for all RCC works as per design givenincluding cost of steel and GI binding wire (18 G) in all floors etc., complete complying with standard specification (contractor has to make his own arrangements for the supply of steel and binding wire) |
| 3 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase stepscritical stepscritical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete.. |
| 4 | Providing and laying in position,Standardised Concrete Mix M- 20 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) |
| 5 | Brick work with fly ash bricks of size 230mm x110mm x70mm in C.M.1:5 (1 cement and 5 Crushed Stone Sand (Commercially called M-Sand)) including curing,etc.,complete for 23cm thick walls upto basement .(upto 1m high above G.L.) |
| 6 | Plastering with cement mortar 1:4 (1 cement and 4 P sand)12mm thick including curing, etc., complete. |
| 7 | White washing two coats over new plastered surface.. |
| 8 | Painting the new plastered walls with two coats ofExterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc.whereverrequired.as per (ISI STD) (It must provide excellent resistance against the growth of algaeandfungi on the walls.And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.. |
| 9 | Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost of trusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red- oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins.For structures likeCYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS |
| 10 | Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD).. |
| 11 | FALSE CEILING WITHGYPSUM BOARDProviding and fixing suspended false ceilingusing SAINT -GOBAIN GYPROC or Equivalent make which includes providing and fixing GI perimeter channel of size 0.50mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brickwall / partition with the help of nylon sleeved and screws at 610mm centres. Then suspending GI intermediate channels of size 45mm, 0.9mm thick with two flange of 15mm each from the sofit at 1220mm centres with ceiling angle of width 25mm x 10mm X 0.55mm thick fixed to sofit with GI cleat and steel expansion fasteners. ceiling section 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lops of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 610mm centres. 12.5mm Gypboard is then screw fixed to ceiling section with 25mm dry wall screws at 230mm centres.Screws fixing is done mechanically suitable attachment, finally the joints are to be finished with joining compound and paper tape and including Painting with two coat of plastic emulsion paint over one coat of primer. |
| 12 | UPVC Window Specification:Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement withGI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and alsoit operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work. |
| 13 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of double leaves door with fully panelled with 12mm thick bothside prelaminated partile boardThe outer frame shall be with aluminium box section 101.60x44.45x3.18m at2.319kg/m and Shutter frame made of section with Vertical & Top rail: [email protected]/m, Bottom rail: 100x44.45x2.50mm@ 1.974kg/mLock rail : 50x44.45x2.5mm @ 1.292kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176kg/mAlu. Handle: 100x30mm @ 0.988 kg/mand necessary accessories such as Alu. clips rubber beading, full length of handles on both sides, lock, furniture fittings such as, Hinges, Automatic door closer, rubber bush, stopper including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and waking hole to the reuired extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc. complete. All the Alu. sectionare to be anodised with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. |
| 14 | Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilator s Grill of standard rectangular designusing 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm forfixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall includingone coat of primer etc.complete. (As per sketch enclosed) andalso as directed during execution.. |
| 15 | Painting new iron work two coats with ready mixed paint with relevent ISI STDof superior quality and approved colour.. |
| 16 | Art work as per the direction of department official, over Oil Paintingwith first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster ofparis, putty, etc., wherever required (Relevent ISI STD), including putty works. |
| 17 | 18W LED 3000K Square Type Recessed Fitting with LED |
| 18 | Supply of 48\" ( 1200 mm ) sweep size 5 star rating Ceiling fan with out regulator |
| 19 | Wiring with 2 x 1.5 sq.mm.PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) |
| 20 | Supplying and fixing Hydraulic Door Closer of approved make.. |
| 21 | Providing and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe witProviding and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe with cement making holes in the walls screwsetc. complete as directed during execution.(ISI STD) |
| 22 | Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets15mm diaC.P.Pillar tap32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white leadteakwood plugscrews rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks). |
| 23 | Supplying and Jointing 20mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete.. |
| 24 | Supplying and fixing P.V.C. pipe 110mm dia rain water down fallpipe as per ISI standard (I.S.4985)including P.V.C.Bends withoutdoor arrangements shoesgratings with F.I.Clamps 40mmx20mm ofsuitable size fixed to wooden kplugs embeded in walls in cementmortar 1:3 (1 cement and 3 river sand including cutting holes inwalls and making good the same after fixing the plugs etc.complete as directed during execution.. |
| 25 | Providing of Rain Water Harvesting struture using precast well ring of size 1200 (inner dia) x 4500mm (Height) (300mm x 15Nos) x 80mm (thick) using 1:1.5:3 concrete necessary earth work excavation providing PCC 1:5:10 and RCC cover slab of 1680mm dia 180mm thick including cost, conveyance, cleaning the site and finishing etc., complete. |
| 26 | Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete. |
| 27 | Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for toplock and bottom rails.The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mmx30mm.The over all size of top raillock rail and bottom rail shall be 75mm x 30 mm.The over all size offrames shall be 50mmx45mmwith suitable rabate for housing the shutter.including labour charges etc.complete.as per ISI standard. |
| 28 | Supply & installation of Split type 1.5 TON Air conditioner ( 5 Star rating ) |
| 29 | 4kva stablizer of copper wound (Double Booster) |
| 30 | Out door angle for Split type Air Conditioner for all capacity ( if required ) |
| 31 | Additional copper Tube for Split type Air Conditioner for all capacity ( ifrequired ) |
| 32 | Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) |
| 33 | 5MP IP Bullet / Dome Camera with SD card Support. |
| 34 | PoE Switches for CCTV IP Camera - 8 Port |
| 35 | Network Video Recorder for CCTV - 8 Channel -1 SATA( 1No.Hard Disk) |
| 36 | Body tech Maxx 10mm thickness Rubber Floor mat for Gym and Home USE, 24x36inch, black pack of 4 pleces. |
| 37 | Slide and Swing combo for kids – playgro garden slider & swing combo for boys and girls perfect for home/indoor 162cm x 162cm x 110cm |
| 38 | Swing for kids indoor and outdoor swings and sliders along with basketball ring hoop |
| 39 | Shopster 55 inch trampoline with safety net kids indoor & outdoor anti rust frame,U ping trampolines, for kids or multicolour |
| 40 | Dawnwake 71\" x 59\" Playpen for Baby up to 4 Years Playards with Play Balls and Anti-Fall Grasp Rings, Kids Activity Center with Safety Lock & Storage Bag (No Mat/No Cushion, Non-Foldable) - Grey |
| 41 | Toy Park Baby Playpen Kids Activity Centre Safe & Spacious Play Yard Home Indoor Outdoor, Happy Game Enclosure Ball Pool Area for Toddlers (Multicolour, 12 Panel Set) |
| 42 | eHomeKart Kids Half-Moon Table – Front Round Shape, Perfect for Home Use (53 x 20 x 20 inches) – Color May Vary – Chairs NOT Included (1 Table Only |
| 43 | Toy Park Kids Stackable Bed for Ages 0 to 7 Years -Pack of 3 (Blue) |
| 44 | Toyshine 5 in 1 Wooden Activity Centre Triangle Toy | Alphabet, Blocks, Abacus, Clock, Writing | Toys for Babies Montessori Learning Toy for 1-5 Year Old - New |
| 45 | Toyshine 6 in 1 Educational Shape Sorter Baby Activity Cube Montessori Toy Gift for Babies 6-18 Months, Multicolor |
| 46 | Smartcraft Colorful and Attractive Funny Cottage Educational Toy, Learning House - Baby Birthday Gift for 2,3 Year Old Boy,Girl Child Multi Colour- (Battery Included) |
| 47 | Kids Drum Set for Toddlers 1-3 Musical Baby Toys for 1 Year Old Boy Gifts Montessori Baby Girl Toys with Microphone Light Up Learning Toys Birthday Gifts for Infants 6 9 12 18 MonthsToddler Age 1-2 |
| 48 | Jam & Honey Tusker Elephant Ride-On Rocker Toy for Kids | Ideal for Children from 12 to 36 Months | Capacity 25 kg | Blue Red & Green | Assorted |
| 49 | Multicolor sheets |
AI Tender Summary
Tender Timeline
Feb 17, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender