Tender For Construction Work Of Pump Room, Boundary Wall And Gate For Operation Of Newly Constructed Tubewell In Composite Pre-Secondary School In Nagar Panchayat Budhana.
Tender Value
9.27 Lakhs
Estimated cost
Bid Submission
07 Mar 2025
0 days left
EMD
92790
Bank guarantee accepted
Document Fee
2190
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
budhana → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of pump room, boundary wall and gate for operation of newly constructed tubewell in Composite Pre-Secondary School in Nagar Panchayat Budhana.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation including water and liquied mud and underfoul condition As Si 251 |
| 2 | Earth work in filling including 10 KM lead |
| 3 | Concrete with 4 cm. stone bakast in 1:4:8.in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work . As SI 281 |
| 4 | M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the workS.I No.305 a |
| 5 | 2 cm thick Damp proof course with Cement and approved coarse sand 1:2 with and including water proofing as ordered by the Engineer incharge in the proportion as spefifiled by the manufacturer including supply of all materials, labour, Tools & plants ptc. required for proper completion of the work and including proper curing & shutterings as necessary. (S.I. 360) |
| 6 | M-150 brick work in 1:4 one cement and four course sand . mortar in super structure including supply of all materials labour, T & P etc required for proper complition of the workS.I No.305 a +309+310 |
| 7 | M-150 brick work in 1:4 one cement and four course sand . mortar , As in item 305ato 309 above but in superstructure including necessary cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add ectra labour to above items. As in Add as si no 305a+309+310a |
| 8 | 12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A) |
| 9 | Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a) |
| 10 | providing and fixing 1mm thick M.S sheet sliding shutters with frams and diagonal braces of 40x40x6mm(1½\"x1x½\"x1¼\") angle iron 3.15 mm (1/8*) gussel plates at the junction and corners hooks at top 25mm (1*) dia pulleys at bottom 40x40x6mm(1½\"x1x½\"x1¼\") angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. complete and applying one priming coat of approved lead paint (N0 material shall be issued by deptt.) |
| 11 | As in item 283 but in R.C.C. Raft foundation and footing with 4 cm. Gauge stone ballast. (S.I. 287) |
| 12 | As in item 283 above but in R.C.C. column in 1:1½:3 (S.I. 289) |
| 13 | As in item 5 above but in R.C.C. T-beam & slab roof and R.C.C. column. In 1:1.5:3 (S.I. 284) |
| 14 | R.C.C. in 1:1½:3 but in plinth beam and lighter beam having spans upto 6 M. (S.I. 286) |
| 15 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorized overlapping shall be measured and including cost of binding wire. |
| 16 | M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. (S.I. 502a) |
| 17 | paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644+645 ) |
| 18 | S/F 2.5 cm thick fully glazed window shutter with all complition..(S.I. New item) |
| 19 | Providing wall putty on oldsurface with approved material of Berger/J.K Birlaa or similar make 2 coats. |
| 20 | Providing cement primer on new surfaces |
| 21 | Distempering three coat with weather coat of approved brand and manufacture and of required shade on including all completion. As SI No new item |
| 22 | 2 cm thick cement plaster in 1:2 with neat finisinghS.I. 597 |
| 23 | 4.0 cm (1”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm (1”) graded approved stone grit,but without base As SI No 605 |
| 24 | Supply and fixing of 10cm (4”) internal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S clamp 2.5 cm × 3mm (1” × 1/8”) fixed to walls with and including supply of 15 cm (6”) long 6mm (1/4”) dia nail all materials, labour and T&P etc required for proper complection of the work and also including repair of plaster pointing etc if damaged during fixing of the pipes. (S.I. 730 a) |
| 25 | providing laying spreading and compacted 22.40-53 mm graded stone aggregatewithfine sand , laying in uniform compacted layers of 100 mm thick with hand roller in sub base/base course on well prepared surface and compactingincluding all T&P taxes & labour cess etc as directed by engineer in charges etc all. complete as per technical specification clarse 406. |
| 26 | Supplying & fixing 80 mm thick Precast cement concreteI shapeinter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than40MPa and weight 4.5 kg per no.including cost of meterial, with blanket layer of 4.00cm thick fine sandincluding labour T& P etc required for proper completion of the work as directed by Engineer-in-charge. as new item 14 +11(ii) = 820+35x1.8=883 |
| 27 | S/F sign boardwith all complition. |
| 28 | Wiring point for Plug with 1.5 Sqmm PVC insulated single core cable including pvc conduit pipe (S.I No 134C) |
| 29 | S/F switch box made up of 16 swg250x200x65 thick As SI No 162 |
| 30 | S/Wiring of submain with two number 4 sq.mm. pvc insulatd 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number2.5 sq mm PVCearthing wirecontinuity wire etc complite in all respect.As SI No 211( B) |
| 31 | S/F of 6 Amp to 32 Amp. SPMCBof As SI No 1003( B)categri B |
| 32 | S/F of 63 Amp 4 pole Isolator of As SI No 1007( B) categri B |
| 33 | S/F of63A 240 volts IC cut out of approved make on the metre board or polished MDFEG/Teak liy board complete in all respect As SI No 1112 (A) |
| 34 | P/F of hexagonal fan box with hexagonal side of 80 mm dia of 16 swg sheet (S.I.No.1149 ) |
| 35 | S/F of ceiling fan with 1.2 m leaf dia with regulater aproved make as per E/I and all completion of the work (Market. Rate) |
| 36 | Wiring point for Fan with 1.5 Sqmm PVC insulated single core cable including pvc conduit pipe (S.I No 133C) |
| 37 | S/F 25 bat LED with approved quality as per direction of E/I (Market. Rate) |
| 38 | Add 18%gst |
AI Tender Summary
Tender Timeline
Feb 16, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 07, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender