Tender For Civil Maintenance Work In Annex Building, Driver Block And H-1 Hall At Awas No.5, Kalidas Marg - Providing And Fixing G.I. Pipe Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc Etc Inernal Work - Exposed On Wall, lucknow-Uttar Pradesh

Tender For Civil Maintenance Work In Annex Building, Driver Block And H-1 Hall At Awas No.5, Kalidas Marg - Providing and fixing G.I. Pipe complete with G.I. fittings and clamps, i/c cutting and making good the walls etc etc inernal work - exposed on wall. ( 20 mm nominal bore ) 18.10.2 , 2 Providing and fixing G.I. Pipe complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. inernal work - exposed on wall. ( 25 mm nominal bore ) 18.10.3, 3 Providing and fixing G.I. Pipe complete with G.I. fittings and clamps, including making good the walls etc. Concealed Pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 15 mm nominal bore ) 18.11.1 4 Providing and fixing G.I. Pipe complete with G.I. fittings and clamps, including making good the walls etc. Concealed Pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 20 mm nominal bore ) 18.11.2 5 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and incluldingthreading the pipe and making long screws, including excavation, refilling the earth or cuttingof wall and making good the same complete wherever required ( 15 mm nominal bore ) 18.47.1, 6 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and incluldingthreading the pipe and making long screws, including excavation, refilling the earth or cuttingof wall and making good the same complete wherever required( 20 mm nominal bore ) 18.47.2, 7 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and incluldingthreading the pipe and making long screws, including excavation, refilling the earth or cuttingof wall and making good the same complete wherever required( 25 mm nominal bore ) 18.47.3, 8 Providing and fixing C.P.Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) 9 Providing and fixing C.P.Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) 10 Providing and fixing C.P.Brass long body bib cock of approved quality conforming to IS Standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1) 11 Dismantling Old Plaster or SkirtingRacking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, 12 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1, 13 Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.DSR-13.88, 14 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), 15 Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), 16 Wall Painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. Two Coat, DSR.N0-13.82.2),

INR 770 /-

INR 30000.0 /-

INR 3 Lakhs /-