Tender For Lathe Fabrication Ms Specials Work In Urban Area Lathe Fabrication And Ms Specials Work In Urban Area Section Jen Bandikui Under Sub Division Bandikui (Dausa) - 1 Turning Of Various Sizes Of Cid Joints Class- 10/ 15 Complete Set (Labour Charg, Bandikui-Rajasthan
TDR : 47786344
Tender Notice
Corrigendum Details
BOQ
Expired
Bandikui
Rajasthan
Corrigendum : Tender For Lathe Fabrication Ms Specials Work In Urban Area Lathe Fabrication And Ms Specials Work In Urban Area Section Jen Bandikui Under Sub Division Bandikui (Dausa) - 1 Turning Of Various Sizes Of Cid Joints Class- 10/ 15 Complete Set (Labour Charg
Name of Work: Lathe, Fabrication & MS Specials Work in Urban Area Section JEn Bandikui under Sub Division Bandikui (DAUSA)
Sl. No.
Item Description
1
Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
2
80 mm dia
3
100 mm dia
4
125 mm dia
5
150 mm dia
6
200 mm dia
7
250 mm dia
8
300 mm dia
9
Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
10
32 mm
11
50 mm
12
Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department
13
32 mm
14
40 mm
15
50 mm
16
65 mm
17
80 mm
18
100 mm
19
150 mm
20
Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job.
21
At Workshop
22
On Site
23
Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
24
Supplying and fixing of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes.
25
Sluice Valve Size 80mm
26
Sluice Valve Size 100mm
27
Sluice Valve Size 125mm
28
Sluice Valve Size 150mm
29
Sluice Valve Size 200mm
30
Sluice Valve Size 250mm
31
Sluice Valve Size 300mm
32
Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
33
Sluice Valve Size 80mm
34
Sluice Valve Size 100mm
35
Sluice Valve Size 125mm
36
Sluice Valve Size 150mm
37
Sluice Valve Size 200mm
38
Sluice Valve Size 250mm
39
Sluice Valve Size 300mm
40
Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes.
41
Sluice Valve Size 80mm
42
Sluice Valve Size 100mm
43
Sluice Valve Size 125mm
44
Sluice Valve Size 150mm
45
Sluice Valve Size 200mm
46
Sluice Valve Size 250mm
47
Sluice Valve Size 300mm
48
Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
49
Sluice Valve Size 80mm
50
Sluice Valve Size 100mm
51
Sluice Valve Size 125mm
52
Sluice Valve Size 150mm
53
Sluice Valve Size 200mm
54
Sluice Valve Size 250mm
55
Sluice Valve Size 300mm
56
Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm).2\" dia. Size (50 mm)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
