Improvement Of Electrical And Lighting System At Aandb- Pocket And R- Pocket Bps- 1 Dismantling of old electric defective contactors, switches, wires,indicators and meters from panel and dismantling defective fluorescent light fittings, ceiling fans, exhaust fans old copper/aluminum wiring, switches and control box etc. for the fixing of new fittings 2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (D.S.R 2022 Code No. 1.8.3) Group C 3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm (D.S.R 2022 Code No -1.17.12) 4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq. mm (D.S.R 2022 Code No -1.17.21) 5 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. (D.S.R 2022 Code No -1.29) 6 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (D.S.R 2022 Code No -1.32) 7 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 06-way, Double door (D.S.R 2022 Code No -2.3.1) 8 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole (D.S.R 2022 Code No -2.10.1) 9 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredSingle pole and neutral (D.S.R 2022 Code No -2.10.2) 10 Supply of ceiling fan having size 1200 mm (48) in white colour. Make: - Anchor/orient/Standard/ Any approved make by DJB. DJB SOR 2022 Item no. 20.1.2 11 Supply of exhaust fan having size 450 mm (15), 1440 R.P.M. in grey colour of single phase 230 volts. Make: - Anchor/orient/ Standard/Almonard/ Any DJB approved make.DJB SOR 2022 Item no. 20.2.3 12 Supply of Air Circulator of size 600 mm Make: - Anchor/orient/ Standard/Almonard / Any DJB approved make.DJB SOR 2022 Item no. 20.3.2 13 Supply of Endura Linear NEO Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 36 W LED 857 Make: Havells /Philips/Crompton/ DJB approved make. DJB SOR 2022 Item no. 19.3.3 14 Providing/ Fixing of 45W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. Make-Havells/Bajaj/Crompton.DJB SOR 2022 Item no. 19.10.5 15 New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. 70/72-watt LED (DJB SOR 2022 Code 19.10.6) 16 Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 2 core 06 mm2 for external, internal lightening system and fans etc. 100 mtr Coil Make: - Grandley/ Gloster/ Havells/ finolex. 17 Supply of street light pole of 4.5 meter high pipe MS pole with bottom plate, wire up to fixture, junction box, over hang, cable support GI pipe with the help of nut, bolts, washers, fasteners etc. as per site requirement Make:- Jindal/Tata/Havells 18 Supply and fixing if 32mm dia. 02 Mtr. long G.I pipe (medium class) bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole/ wall including bending the pipe to the required shape, 2 Nos. 40mm X 3mm flat iron clamps with nuts, bolts, and washer, painting the flat iron with primer and finish paint etc. as required. DSR-2022, Item code- 12.34 19 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (DSR 2021 civil 15.7.4) 20 Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.(SOR 22 E&M Code No41.4) 21 Installation of Pole with grouting nut bolts and fixing of junction boxes & LED light 70 Watts on each street light Pole after erection with all safety measures with the help of skilled labour/technician as required. 22 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required up to 35 sq. mm (clamped with 1mm thick saddle) (DSR 2022 code 7.7.1) 23 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 item no. 5.2) 24 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) (DSR E&M 2022 item no. 5.9) 25 Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as req. DSR Item No. 1.41
