Housing Urban and Rular Development Government Departments Closing in 0 days TDR #47761496

Tender For Special Repair Of Ch Bhawarna

Issued by Government Departments · bhawarna, Himachal Pradesh
Tender Value
4.88 Lakhs
Estimated cost
Bid Submission
21 Feb 2025
0 days left
EMD
9800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Special Repair Of Ch Bhawarna C/O E/Wall And P/L Tile Work And Painting Work Etc. In Old Building Labour Room)

BOQ

Name of Work:- Special Repair of CH Bhawarna (SH:- C/o E/wall & P/L Tile work and painting work etc. in old building labour room) (Deposit)
Sl. No. Item Description
1Excavationinfoundation,trenchesetceterainearthworkinvolvingallclassificationofsoilsuchaspickwork,pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeter) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST andother taxes imposed by the government.
2Providing and laying cement concrete 1:3:6 (One cement isto three sand isto six aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
3Providing and laying cement concrete 1:5;10 (One cement isto five sand isto ten aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
4Providing and laying100mm dia ( One Hundred millimetre) diameterP.V.C. pipeweep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast wallsthrough the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing andM.O.R.D. technical specifications clause 709 and 1206.6 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads and liftsand other incidental . The rateis includingoctroi,royality, Malkana, toll tax, GST orother taxesimposed by the Government.
5Demolishing cement concrete manually/ by mechanical means and disposal of material within all lead as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads and liftsand other incidental . The rateis includingoctroi,royality, Malkana, toll tax, GST orother taxesimposed by the Government.
6Stone filling tightly dry hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge includingcarriage of materials with in allleads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government.
7Providing and layingDamp Proof Course 100mm (One Hundred millimetre) thick withcement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form workand curing complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is includingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government.
8Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body matt finish vetrified tiles of restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade in flooringlaid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design complete including cost and carriage of material with in all leads, lifts andother incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
9Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body matt finish vetrified tiles of restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade in skirting riser of steps and dados laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design complete including cost and carriage of material with in all leads, lifts andother incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
10Repairs to plaster With cement mortar 1:4 (1 cement : 4 fine sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all completeincluding cost and carriage of material with in all leads, lifts andother incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
11Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repairs to scratches complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
12Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
13Painting two coats (excluding priming coats) on new concrete masonry/ asbestos cement/plaster surfaces with ready mixed synthetic enamelpaint of approved bran other than white paint brushing to give an any shade including cleaning the surface of all dirt, dust and other foreign matters and sand papering and stoppingwithin all leads lifts and other incidentals as per the direction of Engineer-in-Charge.
14Distempering (two or more coats) with oil boundwashable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
15Providing and fixing 4mm ( Four millimetre) thick glazing with glass pane of Modiguard/ Saint gobin in steel door,shutters . with PVC / neoprens gaskets complete weight not less then 10.00 Kg/Sqm (Fifteen Killogramme per square metre) as per the Architectural Drawings approved specification, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
16Providing andfixing white vitreous china labortory sink of approved standard ISI marked with drain boardof Diamond/ Unik with C.P. waste pipe, C.I.orM.S.brackets paintedwhitei/ccutting holes and makinggoodthesameof size610x510(sixhundredten intofivehundredten millimetre) with bowl depth 200 mm ( two hundred millimetre) including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
17ProvidingandfixingPVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
18Providing and fixing110 mm (One hundred ten millimetre) diametre high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.IMarked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
19Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved specifications. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.
20Providing and fixing 125 mm nominal dia circular type with 25 mm waste hole PTMT grating of approved quality and colouras approved specifications. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

AI Tender Summary

OUR REF NO 47761496
AUTHORITY Government Departments
TENDER VALUE 4.88 Lakhs
LAST DATE 21-02-2025
Authority
Authority Name Public Works Department
Work Description Special Repair Of Ch Bhawarna C/O E/Wall And P/L Tile Work And Painting Work Etc. In Old Building Labour Room)
Basic Detail
Tender No NIT No.14021-80 Dated 10.02.2025-Bhawarna
Bidding Type Tender
Location
City bhawarna
State Himachal Pradesh
Key Dates
Publish Date 14 Feb 2025
Submission Date 21 Feb 2025
Open Date 21 Feb 2025
Finance
Tender Value 4.88 Lakhs
Tender Fee 350
EMD 9800
Exemption Not Available
Document List
ef3e63a2-17b7-46ac-be79-125591929cf6.html
BOQ_147039.xls
SBD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 14, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 21, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 21, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ef3e63a2-17b7-46ac-be79-125591929cf6.html

xls

BOQ_147039.xls

pdf

SBD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders