|
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out insoft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for cess well cess pits man holes pier holes etc n.exc 10 sqm on plan n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 3 | Returning filling in including spreading levelling water and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavatedmaterial notexc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removal of rubbish from the site complete all as specified and directed. |
| 6 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviciable material from site complete all as specified and directed. |
| 7 | Material and labour for brick work with flyash bricks, modular size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and directed. |
| 8 | All as per item No 7.00 but except brick and ditto-.Note: - Serviceable brick obtained from item No-6.00 shall be used under this item. |
| 9 | Material and labourfor 15mm thick rendering in cement mortar (1:4) on fair faces of brick work with using water proofing coumpound (WPC) @ 200ml per 50 Kg bag of cement or as per manufacturers instructionand finish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 10 | Supply only liquid water proofing compound (WPC) completeall as specified and directed. |
| 11 | Material and labour for precastcement concrete (1:2:4)type B0 (12.5 mm graded stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings set jointed and pointed in cement mortar (1:4) including necessary formwork and demolition of existing louvres and jallies complete all as specified and directed. |
| 12 | Material and labour for providing precast cement concrete (1:2:4)type B1 (20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match complete all as specified and directed. |
| 13 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 14 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion painthaving VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified anddirected. |
| 15 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 16 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, coping, bed block for embedding hold fasts, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed |
| 17 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed. |
| 18 | Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mmgraded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed |
| 19 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 20 | Material and labour for rolled mild steel sections as in framingfor cladding, glazing and the like fixed with angle cleats andconnecting plates, etc conforming to Fe-410 W Gde E-250 quality-A including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 21 | Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 22 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 23 | Dismantling ofposts or struts (wood, steel or RCC of any section) embedded in concrete, brick work masonry etc. any section, including taking out embedded portion and making good disturbed ground including removing of debris from site complete all as specified and directed. |
| 24 | Dismantling of fencing wire mesh of chain link or any type including removing of debris from site complete all as specified and directed. |
| 25 | Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 26 | Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 27 | Material and labour for mild steel round bars 10 mm dia as in tie bar of chain link fencing conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 28 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 29 | Supply only chain link MS galvanisd fencing of any size complete all as specified and directed. Note:- Weight of chain link fence shall be ascertained through BOO as directed by GE. |
| 30 | Fixing only chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 31 | Restraining, resecuring incl. making good to existing chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 32 | Supply and fix mild steel framed work in hung gates, including Pintle hinges, stops, hand made sliding bolts etc. and similar work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 33 | Supply and fix in repair concertina coil (CONSEC ZAL Super Razor punched barb tape (SRPBT)) aluminum basehelix coil withand including necessaryG.I fixing clips for securing complete all as specified and directed with following specification:- (i) Diaof coil (unstretched) - 610 mm (ii) No of Spirals - 6 spirals per per RM (iii)Weight of each coil with hessian pack - 8.00 Kg(±0.5).(iv) Central core wire :- Made from 2.60 mm diaG.I – High Tensile Wireas perIS-4454 galvanised as perIS-2629 . (v) Razor Punched Strip:- Razorpunched tape is CONSEC-ZAL steelcomprising ofAluminium base withzinc alloy @ 150 gm/ m2 conforming to ASTM A-792/A-792M with additionalprimer treatment of Epoxy/ Polyurethane & FinalPaint Topcoat of Caulifield green shade (BSL 139) by Hot Dipping process.Note:- Running length of the wall shall be measured for payment purpose. |
| 34 | Supply and fix in repair galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified anddirected.NOTE: Each line wire to be measured for payment. |
| 35 | Restraining, resecuring incl. making good staples etc to existing Galvanised steel barbed wire of any type and description straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified anddirected.NOTE: Each line wire to be measured for payment. |
| 36 | Material and labour for cutting out cracks to V-section grooves on external surface of wall/ roof or terracing up to 25mm depth and 25mm width and filled with multi purpose binder (MPB) crack filler and rendering the surface in cement mortor (1:3) completeall as specified and directed. |
| 37 | Material and labour for writing letters or figures / Numericals (Block, Roman, Italic or Indian) not exc. 30 cm high with synthetic enamel paint complete all as specified and directed. |
| 38 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint complete all as specified and directed. |
| 39 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 40 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed. |
| 41 | Material and labour for 40mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor including finish the surface even and smooth without using extra cement complete all as specified anddirected. |
| 42 | Material and labour for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 100mm deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 43 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 44 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing theconcrete surface even and smooth without using extra cement including forming costruction joint 30mm deep x 10mm wide filled with sealing compound of group \"A\" complete all as specified and directed. |
| 45 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 46 | Material and labour 75mm tk PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base or base course of floor etc complete all as specified anddirected. |
| 47 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mmgraded stone aggregate) as in levelling course for laying floor finishes complete all as specified and directed. |
| 48 | Material and labour for 12mm thick grandura digital vitrified coloured in matt finish outdoor pavement tiles (good grip series) of size exc 0.11 sqm but n.exc 0.16 sqm, set jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc. and including 15mm thick screed bed in cement mortar (1:6) completeall as specified and directed. |
| 49 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 50 | Supply and fix in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 51 | Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 52 | Material and labour for cutting down vegetation growths like plants / trees of girth n exc 15cm from roof top / sides, external walls of bldgs, chajjas, wall juctions/ at junction of rain water /CI waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls / slab surfaces making good affected locations and applyingapproved chemical (herbalmedicine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM (1:2) complete all as specified and directed.Note :The quoted rate shall be deemed to include the cost of scaffoloding / staging upto four storey bldgs. |
| 53 | Supply and fix steel rolling shutters, thickness of laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, push pull or manual type complete all as specified and directed. |
| 54 | Supply and fix steel rolling shutters, thickness of laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 55 | Greasing, oiling and overhauling of existing steel rolling shutters of any description and in any position up to 10mtr height with header cover box including replacement of damaged curtain laths, lock plate, guide channel, cover etc with suitable locking arrangement and gear box of any description including required spare parts for smooth and proper fuctioning complete all as specified and directed.Note:-Spare parts such as ball bearing and safety lever locks shall be measured and paid seperately under respective items as supply only. |
| 56 | Supply only lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 57 | Supply only ball bearing for rolling shutters complete all as specified and directed. |
| 58 | Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate)in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set incement mortar (1:4) including demolition of old unserviceable cover slab complete all as specified and directed. |
| 59 | Material and labour for mild steel TMT bars 6 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
