| 1 | 30.50 Mtr National Flag ( Documents Are Attech)Supply, Installation, Commissioning & Testing of 30.5 Mtr. Flag Mast suitable for 180 KM/HR wind speed with dimension top dia-150mm, bottom dia-540mm, sheet thickness top-3mm, middle-4mm, bottom-5mm, base plate - 730mm base plate thickness-30mm, pcd - 650 mm complete. Make:vSurya/Aster/UtkarshConstruction of shallow foundation with M20 grade concrete for the Flag mast considering as per Manufacturer Drawing Loz Supply, Installation, Testing & Commissioning of 30.5 Mtr. Flag mast. Mast shaft shall be in three sections, hot dip galvanised and suitable for wind velocity as per IS 875. With PU Painting of Flag Mast shaft.Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates.Supply, Installation, Testing & Commissioning of System for Raising Lowering of Flag. It shall have double drum winch, 6 mm dia galvanised wire rope and integral power tool for the raising and lowering of Flag. Suitable control panel shall be provided for reversing operation of Power tool motor.Supply, Installation, Testing & Commissioning of LED single dome Aviation Obstruction light with 3C x 2.5 Sqmm Cu Multicore Wire.Supply, Installation, Testing & Commissioning of LED 250 watt Flood Light IP 66 100Lm/W. (Quantity - 2 Nos.)17 Supply, Installation, Testing & Commissioning of 5M high hot dip galvanised octagonal pole suitable to mount Ino. LED flood light on top. (Quantity - 2 Nos.)Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special steel along with nuts, washers etc. (For 5M Pole)Supply, Installation, Testing & Commissioning of National Flag Size 20x30 ft., made with shiny kintted polyester, 160 GSM (C) Quantity-2 Nos.)Supply, Installation, Testing & Commissioning of Gl pipe earthing for Flag mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm Gl flats with all materials and labour. (2 nos. per mast |
