Tender For The Work Of Repair And Rewinding Of Mono - Block / Centrifugal Pump Set Under Division Kuchaman - Rewinding Of Three Phase Squirrel Cage Induction Motor Ofmonoblock Pump Sets Including All Necessary Material And Of The Same Characteristics As O, Jaipur-Rajasthan

Tender For The Work Of Repair And Rewinding Of Mono - Block / Centrifugal Pump Set Under Division Kuchaman - Rewinding of three phase squirrel cage induction motor ofMonoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),E class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. 2 3 H.P. 3 5 H.P. 4 7.5 HP 5 10.00 HP 6 12.5 HP 7 15.00 HP 8 17.50 HP 9 20.00 HP 10 SUPPLY & FIXING OF SPARE PARTS (MOTOR + PUMP) 11 Connection Plates 12 up to 10 HP 13 10 HP to 20 HP 14 Cooling Fan 15 up to 10 HP 16 10 HP to 20 HP 17 GM/SS bush 18 Upto 10 HP 19 10 HP to 20 HP 20 Mechanical reconditioning of Bearing sheet 21 Upto 10 HP 22 10 HP to 20 HP 23 Mechanical reconditioning ofImpeller sheet and Key way slot 24 Upto 10 HP 25 10 HP to 20 HP 26 Oil seal 27 Upto 10 HP 28 10 HP to 20 HP 29 Labour charge for opening and fitting of pump sets 30 Upto 10 HP 31 10 HP to 20 HP 32 Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) E class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump setsand transportation to and fro from installation site complete as per direction of engineer in charge at site. 33 Above 15.00 HP but upto 17.50 HP 34 Above 17.50 HP but upto 20.00 HP 35 Above 20.00 HP but upto 25.00 HP 36 Above 25.00 HP but upto 30.00 HP 37 Above 30.00 HP but upto 35.00 HP 38 Above 35.00HP but upto 40.00 HP 39 Above 40.00 HP but upto 45.00 HP 40 Above 45.00 HP but upto 50.00 HP 41 Above 50.00 HP but upto 60.00 HP 42 Above 60.00 HP but upto 75.00 HP 43 Above 75.00 HP but upto 100.00 HP 44 Above 100.00 HP but upto 125.00 HP 45 Above 125.00 HP but upto 150.00 HP 46 Above 150.00 HP but upto 175.00 HP 47 SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP) 48 Connection Plates 49 5 HP to 20 HP 50 20 HP to 30 HP 51 30 HP to 50 HP 52 Above 50 HP to 100 HP 53 Above 100 HP to 150 HP 54 Above 150 HP to 175 HP 55 Cooling Fan 56 5 HP to 20 HP 57 20 HP to 30 HP 58 30 HP to 50 HP 59 Above 50 HP to 100 HP 60 Above 100 HP to 150 HP 61 Above 150 HP to 175 HP 62 Fan Cover 63 5 HP to 20 HP 64 20 HP to 30 HP 65 30 HP to 50 HP 66 Above 50 HP to 100 HP 67 Above 100 HP to 150 HP 68 Above 150 HP to 175 HP 69 G.M./SS Gland Guide Bush 70 5 HP to 20 HP 71 20 HP to 30 HP 72 30 HP to 50 HP 73 Above 50 HP to 100 HP 74 Above 100 HP to 150 HP 75 Above 150 HP to 175 HP 76 Shaft with Sleeve Chuck Nut 77 5 HP to 20 HP 78 20 HP to 30 HP 79 30 HP to 50 HP 80 Above 50 HP to 100 HP 81 Above 100 HP to 150 HP 82 Above 150 HP to 175 HP 83 Shaft Chuck Nut 84 5 HP to 20 HP 85 20 HP to 30 HP 86 30 HP to 50 HP 87 Above 50 HP to 100 HP 88 Above 100 HP to 150 HP 89 Above 150 HP to 175 HP 90 G.M. Neck Ring 91 5 HP to 20 HP 92 20 HP to 30 HP 93 30 HP to 50 HP 94 Above 50 HP to 100 HP 95 Above 100 HP to 150 HP 96 Above 150 HP to 175 HP 97 Bush Shaft Sleeve of G.M. 98 5 HP to 20 HP 99 20 HP to 30 HP 100 30 HP to 50 HP 101 Above 50 HP to 100 HP 102 Above 100 HP to 150 HP 103 Above 150 HP to 175 HP 104 G.M. Gland Cover 105 5 HP to 20 HP 106 20 HP to 30 HP 107 30 HP to 50 HP 108 Above 50 HP to 100 HP 109 Above 100 HP to 150 HP 110 Above 150 HP to 175 HP 111 S.S. Shaft (Non Magnetic) 112 5 HP to 20 HP 113 20 HP to 30 HP 114 30 HP to 50 HP 115 Above 50 HP to 100 HP 116 Above 100 HP to 150 HP 117 Above 150 HP to 175 HP 118 G.M. Shaft Sleeve Check Nut 119 5 HP to 20 HP 120 20 HP to 30 HP 121 30 HP to 50 HP 122 Above 50 HP to 100 HP 123 Above 100 HP to 150 HP 124 Above 150 HP to 175 HP 125 M.S. Shaft Check Nut 126 5 HP to 20 HP 127 20 HP to 30 HP 128 30 HP to 50 HP 129 Above 50 HP to 100 HP 130 Above 100 HP to 150 HP 131 Above 150 HP to 175 HP 132 Cooling pipe set with nozzle & Nut 133 5 HP to 20 HP 134 20 HP to 30 HP 135 30 HP to 50 HP 136 Above 50 HP to 100 HP 137 Above 100 HP to 150 HP 138 Above 150 HP to 175 HP 139 AIR Cock 140 5 HP to 20 HP 141 20 HP to 30 HP 142 30 HP to 50 HP 143 Above 50 HP to 100 HP 144 Above 100 HP to 150 HP 145 Above 150 HP to 175 HP 146 JOB WORK FOR REPAIR OF PUMP MOTOR 147 Bearing Housing (rebuilding, turning & finishing) 148 5 HP to 20 HP 149 20 HP to 30 HP 150 30 HP to 50 HP 151 Above 50 HP to 100 HP 152 Above 100 HP to 150 HP 153 Above 150 HP to 175 HP 154 Bearing Cap (rebuilding, turning & finishing) 155 5 HP to 20 HP 156 20 HP to 30 HP 157 30 HP to 50 HP 158 Above 50 HP to 100 HP 159 Above 100 HP to 150 HP 160 Above 150 HP to 175 HP 161 Impeller Reconditioning for all type of Pump 162 5 HP to 20 HP 163 20 HP to 30 HP 164 30 HP to 50 HP 165 Above 50 HP to 100 HP 166 Above 100 HP to 150 HP 167 Above 150 HP to 175 HP 168 Labour Charges for Dismantling & Assembling of Pump 169 5 HP to 20 HP 170 20 HP to 30 HP 171 30 HP to 50 HP 172 Above 50 HP to 100 HP 173 Above 100 HP to 150 HP 174 Above 150 HP to 175 HP 175 Coupling with stud and rubber bush 176 5 HP to 20 HP 177 20 HP to 30 HP 178 30 HP to 50 HP 179 Above 50 HP to 100 HP 180 Above 100 HP to 150 HP 181 Above 150 HP to 175 HP 182 Supply & Fixing of tyre coupling sets according torelevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. 183 Type 14 Nos. set 184 Type 15 Nos. set 185 Type 16 Nos. set 186 Type 17 Nos. set 187 Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. 188 6304 or equivalent size 189 6305 or equivalent size 190 6306 or equivalent size 191 6307 or equivalent size 192 6308 or equivalent size 193 6309 or equivalent size 194 6310 or equivalent size 195 6311 or equivalent size 196 6312 or equivalent size 197 6316 or equivalent size 198 6317 or equivalent size 199 6318 or equivalent size 200 6319 or equivalent size 201 NU319C or equivalent size 202 Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding) 203 Preventive Maintenance 204 Routine maintenance of centrifugal coupled pump and motorincluding opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job 205 5 HPto 20 HP 206 20 HPto 30 HP 207 Above 30 HP and up to 50 HP 208 Above 50 HP and up to 100 HP 209 Above 100 HP and up to 150 HP 210 Above 150 HP and up to 175 HP 211 Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job. 212 Cleaning of Electric PanelPMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job. 213 Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. 214 5 HP to 20 HP 215 Above 20 HP and up to 30 HP 216 Above 30 HP and up to 50 HP 217 Above 50 HP and up to 100 HP 218 Above 100 HP and up to 150 HP 219 Above 150 HP and up to 175 HP

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	19-02-2025	year typing mistake	Other	24-02-2025

INR 1000 /-

INR 40000.0 /-

INR 20 Lakhs /-