Public Administrative Department Local Bodies Closing in 0 days TDR #47726531

Tender For Ward - 08 Construction Work Of Toilet In Front Of Mau Muftiwada Police Station.

Issued by Local Bodies · shikarpur, Uttar Pradesh
Tender Value
8.25 Lakhs
Estimated cost
Bid Submission
22 Feb 2025
0 days left
EMD
82600
Bank guarantee accepted
Document Fee
1950
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
shikarpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Ward - 08 Construction work of toilet in front of Mau Muftiwada police station.

BOQ

Name of Work:- वार्ड - 08 मौ मुफ्तीवाड़ा थाने के सामने शौचालय का निर्माण कार्य।
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.As per DSR 2.6
2Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)As per DSR 4.1.8
3Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) As per DSR 5.2.2
4Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete As per DSR 5.9.1
5Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts As per DSR 5.9.6
6Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.As per DSR 5.22.6
7Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) As per DSR 6.1.1
8Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) As per DSR 6.4.1
912 mm cement plaster of mix :1:4 (1 cement: 4 fine sand). As per DSR 13.1.1
10Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces. As per DSR 10.5.1
11Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)As per DSR 4.1.3
12Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm. As per DSR 11.41.2
13Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete.As per DSR 13.26
14Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)As per DSR 13.46.1
15Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.As per DSR 18.8.1
16Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR 18.48.
17Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.As Per DSR No.18.51.
18Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.As Per DSR No.18.53.
19Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: :: AS PER DSR No.17.1.1
20Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : :: AS PER DSR No.17.3.1
21Providing and fixing wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: AS PER DSR No.17.7.1
22Supply of fixing of 110mm.(4\") internal dia PVC pipe of 6 kg/sqc working pressure including all fittings as colar,socket,Tee,Band clamp,Fixed to wall by 15 cm long iron nails & Solution and repairing ofdamage wall surface during,execution ofwork . Including supply of all materials,labour and T&P etc.required for proper complition of the work.SI No 730(a).
23Providing and laying cement concrete 1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. Pipe
24Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). DSR 11.20.1
25Submersible moter fitting.
26Electricity fitting Complete.
27Supply and Fixing of board at Site completion work.
28GST 18%

AI Tender Summary

OUR REF NO 47726531
AUTHORITY Local Bodies
TENDER VALUE 8.25 Lakhs
LAST DATE 22-02-2025
Authority
Authority Name Nagar Palika Parishad
Work Description Tender For Ward - 08 Construction work of toilet in front of Mau Muftiwada police station.
Basic Detail
Tender No 156, dt. 11.02.2025
Bidding Type Tender
Location
City shikarpur
State Uttar Pradesh
Key Dates
Publish Date 13 Feb 2025
Submission Date 22 Feb 2025
Open Date 22 Feb 2025
Finance
Tender Value 8.25 Lakhs
Tender Fee 1950
EMD 82600
Exemption Not Available
Document List
BOQ_1800551.xls
Tendernotice_1.pdf
13674249-05d6-4b14-bb59-38ba6a24687d.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 13, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 22, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 22, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1800551.xls

pdf

Tendernotice_1.pdf

html

13674249-05d6-4b14-bb59-38ba6a24687d.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders