|
| 1 | Detail of Work |
| 2 | Safe cartage of PCC/ST poles up to (11 Mtr. Long) from ESC, SRE to site of workincluding loading & unloading at both ends. |
| 3 | Safely cartage of other complete line material(Except PCC/ST Pole) from ESC, SRE to site of workincluding loading, unloading at both ends. |
| 4 | Erection of single support on PCC/ST poles up to (11 Mtr. Long)with complete fitting of all accessories 11 KV/LT line complete. |
| 5 | Erection of double Pole on PCC/ST poles up to (11 Mtr. Long) with complete fitting with all accessories as per RESPO specification. |
| 6 | Fixing of 11 KV stay rod by digging of pits in block of 600X600X300 MM. & with new brick and nozzling of stay wire 7/10 SWG and fitting the same on the pole. |
| 7 | Providing and fixing of stone pad 300x300x75 |
| 8 | Earthing of poles by earthing rods . |
| 9 | Providing of all type MS clampsfor PCC/ST poles with nuts and bolts made by MS flat size 50x6mm best quality. |
| 10 | Providing & Fixing nuts & bolts of various sizes. |
| 11 | Providing and fixing Suspension-clamp with I-HOOK. |
| 12 | Removal of old & used conductorfrom the existing 11 KV/LT line with making roll of conductor and safely carrige from siteto ESC, SRE including loading and unloading at both ends. |
| 13 | Laying, lifting, stringing, sagging jumpering & binding of ACSR Rabbit Conductor for 11KV/LT Line including complete. |
| 14 | Laying, lifting, stringing, sagging jumpering & binding of ACSR Weasel Conductor for 11KV/LT Line including complete. |
| 15 | Removal of 25/63/100 KVA T/F from the existing D/P after opening HT & LT connection and with shifting the T/F from new site. |
| 16 | Safe installation of 25/63/100 KVA T/F on the new double pole with complete fittings including making connections and commissioning. |
| 17 | Laying, lifting, Stringing, proper sagging ofLT AB cable of size 3x95+1X70+1X16 and 3x120+1x95+1x16 sq.mm. including ofall accessorie. |
| 18 | Concreting of PCC/ST pole with cement concreting in block of 600x600x1500 mm in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5” |
