|
| 1 | Scraping of grass/wild growth etc by manually on the shoulders of main Runway/taxi track including all around the runway light, etc, including removing of rubbish from the site to a distance exc, 500m but n. exc 1000m and deposited where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directedNote:(i) Cutting/scraping of grass/wild growth, etc, growth around the runway light (where ever require) shall be carried once in a month or as directed by Engineer-in-Charge and each cutting/scraping shall be measured and paid for separately |
| 2 | Scraping of grass/wild growth etc by using grass cutting machine on the shoulders of main runway, taxi track, PTT, loops etc and other adjacent areas. including removing of rubbish from the site to a distance exc, 500m but n. exc 1000m and deposited where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directed and as per user requirement. Note: (i) Contractor will arrange his own mechanical slasher (set of 03 grass cutting machine with POL and Mobil). |
| 3 | Cleaning of monsoon drains1.50 m in depth (average) as ordered including taking out accumulated silts, sand, muds, etc. from bottom of drains, removal of all types of organic materials, silts, sand, muds, etc. from bottom of brick drains etc. to a distance of exc. 250m but not exc 500m, complete all as specified and as directed.Note: Monsoon drains to be cleaned for 2 time within the completion period. |
| 4 | M&LPloughing and Loosening of sand layer by using Mechanical Tractor including raising (or lowering) to required size and shape for the area approx 4182.00 Sqm (Size 91.5m x 22.85m x 2 Nos) as directed.Note:(i) Ploughing and Loosening shall be carried out at the minimum interval of 15 days or as directed.(ii) One job inclusive of minimum 5 to 6 hrs ploughing with mechanical tractor. |
| 5 | M&LSand and spreading / levelling of sand in layers not exc. 25 cm thick all as specified and as directed. |
| 6 | (General Note:-applicable for schedule of works item No 1 to 05 :- Work will be carried out on non flying day / non flying hours only.No claim will be entertained due to any loss of working hours.) |
| 7 | M&LCutting grass mechanically operated or slasher where ever required including removing material obtained from cutting/cleaning both side of shoulders and WSA &thrown upto 5kms away from the site complete all as specified and as directed by Engr-in-ChargesNote: (i) Contractor will arrange his own mechanical slasher (set of 01 tractor & jungle jim) with POL and MT driver.(ii) Work will be carried out on non flying day / non flying hours only as per direction of Engr-in-Charge.) No claim will be entertained due to any loss of working hours.(iii) A log register to be maintained in consultation with Engr-in-Charge.(vi) The Unit Rate of item of work will be inclusive of all the other charges for the machineries including registration charges, Road tax, Insurances charges, maintenance charges,cost of fuel, lubricants,salary of driver, washing charges, any repairing/ replacement of spare parts charges and various other taxes & levies,if applicable, fines,etc.(v) Reporting duty places is Air Field area under GE (Air Force) There will be no dead hour/milege.The hour age for the purpose of \" vehicle run\" and \"hours of duty\" shall be rockoned from the starting of the job to finishing of the job. No hour will be considered for lunch/breakfast/dinner/garaging or for drawl of disel etc. Contractor shall be quote accordingly. |
| 8 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc |
| 9 | M&L rendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & smooth without using extra cement complete all as specified and as directed.Note:- Liquid water proofing compound shall be measured & paid separately |
| 10 | M&L for applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of primer to new plastered of wall (including chajja, facia & ceiling surface) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed. |
| 11 | Supply only Liquid Waterproofing Compound |
| 12 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, embedded in concrete |
| 13 | Dismantling fencing wire mesh, any type |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 15 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil |
| 16 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in Cement concrete in foundations, filling and mass concrete |
| 17 | S&F Mild Steel Works (Miscellaneous) as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessarydrilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165+A2 |
| 18 | S&F 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 19 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link) |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 21 | Supply only Chain link MS galvanised fencing, any size or type |
| 22 | M&L preparation of new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer |
| 23 | M&L preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer |
| 24 | Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed. |
| 25 | M&L 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub-floors, sub-bases, floors, pavings etc |
| 26 | M&L 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub-floors, sub-bases, floors, pavings etc |
| 27 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 28 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade pointed with grey cement and pigment |
| 29 | M&L Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match 1:2:4 type B-1 using 20mm graded stone aggregates |
| 30 | Demolition of Brickworkmasonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete. |
| 31 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and as directed. |
| 32 | Dismantling of bricks(laid in flat or on edge) in floors, channels , kerbs, apron etc (each layer) bedded and jointed in any mortar . |
| 33 | M&L brick work with sub class \"B\" old size bricks laid flat , in drain/floor bedded and jointed and pointed in cement mortar 1:6 complete all as specified and as directed. |
| 34 | All as in item no-33.00 above but except bricks. |
| 35 | M&L brick work with sub class \"B\" bricks laid on edge old size bricks bedded and jointed in cement mortar 1:6 and pointed in cement mortar complete all as specified and as directed. |
| 36 | M&L raking out joints/ pointing to brick work laid on flat in floors, surface channels, drain, roofs, etc including removing of any debris, grass and other materials complete all as specified and as directed. . |
| 37 | M&L raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, drain, roofs, etc including removing of any debris, grass and other materials all as specified and as directed.. |
| 38 | M&L flush pointing to brick laid flat in pavings in CM 1:4 complete all as specified and as directed. |
| 39 | M&L flush pointing to brick on edge pavings in CM 1:4 complete all as specified and as directed. |
| 40 | M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in channel /drain complete all as specified and as directed. |
| 41 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mitred/stopped ends etc |
| 42 | Add or deduct for each 25mm girth or part thereof over or under 30cm. |
| 43 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
