|
| 1 | PROVISION / REPAIR OF TOILET & INSTALLATION OF COLD & PURE DRINKING WATER AT SCHOOL FOR BLIND, RED CROSS SCHOOL FOR THE DISABLE AT SAINTALA. |
| 2 | Surface dressing (Soft/Loose soil) n exc. 15 cm deep |
| 3 | Excavating over areas, (soft/loose soil) n exc 1.5 m deep and getting out and removing excavated soil to a distance of 50 mtr, depositing where directed at a level n exc. 1.5 m above the starting point. |
| 4 | M&L, for Sand filling under floors or in foundations including watering and consolidation . |
| 5 | Excavating in trenches, (soft/loose soil) n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, manholes, pier holes, etc. and getting out and removing excavated soil to a distance of 50 mtr, depositing where directed at a level n exc. 1.5 m above the starting point. |
| 6 | M&L, for anti termite treatment at the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area. |
| 7 | M&L,for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface. |
| 8 | M&L, for Loose filling of broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells. |
| 9 | M&L, for Cement concrete in foundations, Type B2, 1:2:4(40mm graded aggregate) |
| 10 | M&L,for Providing, cement concrete type B1, 1:2:4 (20mm graded aggregate) inwindow cills, copings, water troughs and the likeincluding for use of form work. |
| 11 | M&L, for Providing, precast cement concrete Type B1, 1:2:4 (20 graded aggregate and set in 1:4 cement mortar) cover slabs for man holes, soak pit etc. |
| 12 | M&L, for Providing, precast cement concrete jallies, Type B1, 1:2:4 (12.5mm graded aggregate and set in cement mortar 1:4) of 25mm thick including all mouldings. |
| 13 | M&L, for Reinforced cement concrete M-20 grade, 1:1½:3, (20mm graded aggregate) in foundations, including footings, foundation beams, plinth beams, bases for columns, etc. |
| 14 | M&L, for Reinforced cement concrete M-20 grade, 1:1½:3, (20mm graded aggregate) in Slabs supported on walls, beams and columns etc. |
| 15 | M&L, for Reinforced cement concrete chajjas, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 16 | M&L, for Reinforced cement concrete Beams, cantilevers, lintels over 1.5m span, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 17 | M&L, for Reinforced cement concrete column, M-20 grade, 1:1½:3, (20mm graded aggregate) |
| 18 | M&L, for Brickwork (Old size) with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 cement mortar. |
| 19 | M&L, for Brickwork (Old size) with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 cement mortar. |
| 20 | M&L, for Brickwork with fly ash bricks in one brick thick honey-comb walling, built in 1:4 cement mortar. |
| 21 | Cutting chases for concealed water tubing and pointing in cement mortar 1:3 , cutting not exc 10 cm girth . |
| 22 | M&L, for Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams. |
| 23 | M&L, for Formwork to soffits of suspended slabs such as roof slabs of rough finished. |
| 24 | M&L,for Formwork to chajjas of rough finished. |
| 25 | M&L, for Formwork to sides of pillars of rough finished surfaces and of square or rectangular. |
| 26 | M&L,for Formwork to sides and soffits of floor or roof beams, lintels of roughfinished. |
| 27 | S&F, Mild steel framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering and to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings. |
| 28 | S&F, for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. MAKE TATA/ SAIL/ JINDAL PANTHER/ JSW / VEDANTA / VIZAG STEEL. |
| 29 | Same as item No. 27 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 30 | S&F, for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make TATA/JINDAL |
| 31 | M&L, for rendering 10mm thick cement plasterof 1:4 cement mortar on fair faces of brick wor after removing old lime wash (if any), hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster. |
| 32 | M&L, for rendering 12mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces. |
| 33 | M&L, for rendering 15mm thick cement plaster of 1:4 cement mortar on fair faces brick wall surfaces. |
| 34 | M&L, for rendering 10mm thick cement plaster of 1:4 cement mortar on fair faces concrete surfaces. |
| 35 | M&L, for rendering 5mm thick cement plaster on fair faces of concrete sur faces. |
| 36 | S&F, Non - skid Ceramic colored tiles 7 to 8 mm thick,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over screed bed or bedding layer of 15mm thick of 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO |
| 37 | S&F, for Glazed ceramic colored tiles in vertical surfaceof size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO |
| 38 | M&L, for Cement concrete floor type B-2,1:2:4(40mm graded aggregate) of 150mm thick including for Use and waste of form work/screed strips,finishing surfaces of concrete in sub-floors, sub-bases, etc.even and rough to receive the topping layer. |
| 39 | M&L, for Cement concrete floor of 100mm thick, type B-1, 1:2:4 (20mm graded aggregate) including for Use and waste of form work/screed strips,finishing surfaces of concrete topping even and fair (without using extra cement) |
| 40 | M&L, for Cement concrete floor of 55mm thick, type B-1, 1:2:4 (20mm graded aggregate) including for Use and waste of form work/screed strips,finishing surfaces of concrete topping even and fair (without using extra cement) |
| 41 | M&L, for chequered cement concrete tiles 20cm x 20cm x 25mm thick, with white cement & pigment, set, jointed and pointed in neat cement slurry in floors. |
| 42 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make ASIAN/BERGER/NEROLAC |
| 43 | Material & labour for, Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work. Make ASIAN/BERGER/NEROLAC |
| 44 | S&F, for 25mm dia low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE |
| 45 | Ditto but 20mm dia LDPE pipes. |
| 46 | Ditto but 15mm dia LDPE pipes. |
| 47 | S&F, for 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in MESSSR Part I-2009 including for 25mm dia. ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule. Make SINTEX/SUPREME/PLASTO |
| 48 | S&F, for 15mm dia. bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. MAKE CERA/PARRYWARE/HINDWARE/GAGUAR/KOHLER |
| 49 | S&F, for 15mm dia. Stop valves,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions. MAKE CERA / PARRYWARE / HINDWARE / GAGUAR / KOHLER |
| 50 | Ditto but 25mm dia. Stopvalves. MAKE CERA/PARRYWARE/HINDWARE/GAGUAR/ KOHLER |
| 51 | S&F,for 50mm dia.waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed . |
| 52 | S&F, for complete set of Wash down water closet (Pedestal pattern), 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.MAKE CERA/PARRYWARE/HINDWARE/GAGUAR/KOHLER |
| 53 | M&L, for Water closet (Squatt pattern) complete including provision of cement concrete bedding, setting the trap and pan in cement concrete (1 cement, 2 sand and 5 aggregate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated), PVC connections 15mm size with PTMT nuts of length 300mm, 10 ltrcapacity PVC valveless, syphonic action type, flushing cistern, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern low level, white, with inlet, ball valve, float and handle including brackets. MAKE CERA/PARRYWARE/HINDWARE/GAGUAR/KOHLER |
| 54 | S&F, 75mm dia. PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE |
| 55 | S&F, for Vitreous China Urinal, Half stall type, white,PVC connections 15mm size with PTMT nuts of length 300mm,15mm size Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)MAKE CERA/PARRYWARE/HINDWARE/GAGUAR/KOHLER |
| 56 | S&F, for Vitreous china urinal partition white of size 310x700 mm ,Urinal partitions slabs terminating about 40cm above floor line. |
| 57 | S&F, 75mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 58 | M&L, for Concrete bed to 100mm dia. drain pipes including forming cradles in cement concrete 1:3:6, Type-C2 |
| 59 | S&F, for 75mm dia. PVC (SWR) vent cowl. |
| 60 | S&F, for 75 mm dia. PVC (SWR) junction single, (Single T) equal. |
| 61 | S&F, 50mm dia. low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2laid in wall. Make KASTA / SUPREME / FINOLEX / ASTRAL LTD. / ASHIRVAD PVT.LTD. / DUTRON / PRINCE |
| 62 | S&F, for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube. |
| 63 | S&F, for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site . |
| 64 | S&F, for 100mm size Extruded aluminium alloy handles, fabricated type, anodised. |
| 65 | S&F,for 200mm size Aluminium anodised, barrel tower bolts of ex truded section. |
| 66 | S&F, for 100mm size Butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 . |
| 67 | S&F, for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) |
| 68 | Demolition cement concrete in ground floors n exc 15 cm thickness and removing from the premises to a lead of 100mtr. |
| 69 | Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings |
| 70 | S&F,for drinking water cooler of capacity 120 litre and discharge of 60 litres/hour. Make BLUE STAR/ VOLTAS/USHA |
| 71 | S&F,for fully automatic with auto cut off RO+ UV portable water purification system. (RO12 LPH) MAKE AQUAGUARD/HAVELS/KENT/V-GUARD |
| 72 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, removing materials to designated store for reuse or otherwise and making good the disturbed surfaces of walls. Fitings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately. |
| 73 | Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store. It will be measured only when found serviceable in all respects complete for reuse. |
| 74 | Supply & fixing of 240V, 12 Way, Double Door, Metallic Distribution Board in recess/concealing, DB shall have Neutral & Earth Bar for outgoing power distribution. It shall have Din Rail for Fixing of MCB/ RCBO. Required MCB /RCBOs are to be measured separately.The material to be used shall be confirming to relevant IS/IEC standards. The make of material will be any reputed make like V-Guard, Legrand, Crabtree, Havells etc. |
| 75 | Supply & fixing of 240V, 4 Way, Double Door, Metallic Distribution Board in recess/concealing, DB shall have Neutral & Earth Bar for outgoing power distribution. It shall have Din Rail for Fixing of MCB/ RCBO. Required MCB /RCBOs are to be measured separately.The material to be used shall be confirming to relevant IS/IEC standards. The make of material will be any reputed make like V-Guard, Legrand, Crabtree, Havells etc. |
| 76 | Supply & fixing of 16 Amp,240 V, Double Pole Residual Current Circuit Breaker with Overcurrent Protection (RCBO) for earth leakage, overload & short-circuit protection with Sensitivity 30 mA in the existing MCB DB complete with connection, testing & commissioning. The make of material will be any reputed make like V-Guard, Legrand, Crabtree, Havells etc. |
| 77 | Supply & fixing of 40 Amp,240 V, Double Pole Residual Current Circuit Breaker with Overcurrent Protection (RCBO) for earth leakage, overload & short-circuit protection with Sensitivity 30 mA in the existing MCB DB complete with connection, testing & commissioning. The make of material will be any reputed make like V-Guard, Legrand, Crabtree, Havells etc. |
| 78 | Supply & fixing of 6 to 32 Amp rating, Single Pole, 240 V, 10KA \"C\" Curve miniature circuit breaker (MCB) in the existing MCB DB complete with connection, testing & commissioning. |
| 79 | Material & Labour for one light or one fan point wiring in PVC conduit with 1.5 sq.mm single core FRLS copper conductor cables to be controlled by one switch. The material to be used shall be of ISI marked and confirming to relevant IS. |
| 80 | Material & Labour for one 3 pin socket outlet wiring independently in PVC conduit with 2.5 sq.mm single core FRLS copper conductor cables. The material to be used shall be of ISI marked and confirming to relevant IS. |
| 81 | Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 2.5 Sq. MM + 1 x 2.5 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable inPVC conduit in recessed as required. The material to be used shall be of ISI marked and confirming to relevant IS. |
| 82 | Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 4 Sq. MM + 1 x 4 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable inPVC conduit in recessed as required. The material to be used shall be of ISI marked and confirming to relevant IS. |
| 83 | Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 1.5 Sq. MM + 1 x 1.5 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable inPVC conduit in recessed as required. The material to be used shall be of ISI marked and confirming to relevant IS. |
| 84 | Cutting chases for concealed conduit wiring etc. and making good, cutting not exc 10 cm girth. |
| 85 | Material & Labour for Ceiling rose, 3 Phase/3 Pin, PVC/Polycarbonate, Isolated Body.The material to be used shall be of ISI marked and confirming to relevant IS. |
| 86 | Supply & fixing of modular switches 1 Way, 6 Amp, 1 Modulein the existing switch board including connection & testing. The material shall be of ISI marked and confirming to relevant IS. |
| 87 | Supplying & fixing of 2/3 Pin, 6 A, Combined Socket , 2 Module. The material shall be of ISI marked and confirming to relevant IS. |
| 88 | Supply & fixing of modular switches 1 Way, 16 Amp, 1 Modulein the existing switch board including connection & testing. The material shall be of ISI marked and confirming to relevant IS. |
| 89 | Supplying & fixing of 2/3 Pin, 6 A/16A Combined Socket , 2 Module. The material shall be of ISI marked and confirming to relevant IS. |
| 90 | Material & Labour for modular white cover plate with frame, 2 Module. |
| 91 | Material & Labour for modular white cover plate with frame, 3 Module. |
| 92 | Material & Labour for modular white cover plate with frame, 4 Module. |
| 93 | Material & Labour for modular white cover plate with frame, 6 Module. |
| 94 | Material & Labour for modular white cover plate with frame, 12 Module. |
| 95 | Material & Labour for Modular Metal Flush Box, 2 Module. |
| 96 | Material & Labour for Modular Metal Flush Box, 3 Module. |
| 97 | Material & Labour for Modular Metal Flush Box, 4 Module. |
| 98 | Material & Labour for Modular Metal Flush Box, 6 Module. |
| 99 | Material & Labour for Modular Metal Flush Box, 12 Module. |
| 100 | Supply & fixing of 1 x 20 Watt, 220 V AC, LED Light fittings with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make of LED Light fittings to be provided shall be of Phillips/Bajaj/Havells, Syska. |
| 101 | Supply & fixing LED Street Light fitting 60 Watt , 230 V AC Outdoor Type with High Pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact & corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 Protection Complete. It includes suitable GI bracket with accessories for fixing of street light. Make of LED Street Light fittings to be provided shall be of Phillips/Bajaj/Havells/Syska. |
| 102 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store. |
| 103 | Supply & fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mmsweep. Min air delivery 210 CFM with service value 6.00, BEE 5 Star Rated with Brushless Direct Current Motor (BLDC). The material to be supplied shall be of ISI marked & of reputed make like Atomberg, Bajaj, Surya, Orient, Havells, V-Guard etc. |
| 104 | Supply & fixing of exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm. It includes necessary clamps & accessories fo fixing on the wall. The material to be supplied shall be of ISI marked & of reputed make like Atomberg, Bajaj, Surya, Orient, Havells, V-Guard etc. |
| 105 | Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduitpipe for loop earthing etc. as required with 4mm dia galvanized iron wire. |
| 106 | Material & Labour for earthing with GI earth Pipe of 4.5 Meter Long, 40 MM Dia Including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. This also includes earth excavation, earth pit chamber construction and earth refilling. |
| 107 | Supplying & fixing single pole blanking plate in the existing MCB DB Complete etc. as required. |
| 108 | Supplying & fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 109 | Supply, installation, testing & commissioning of of Pure Sine Wave Inverter of Capacity : >=3 KVA with 1 No. Trolley, Inverter Input: Single Phase, 230 V, 50Hz, AC, Inverter Output: 230V AC, Single Phase, Battery Capacity: >=150 AH, Battery Output: 12 V, Nos. of Battery: >=4 Nos.,Battery Type: Maintenance Free, Degree of Ingress Protection for Inverter: IP20 or Better. It includes all accessories like interconnecting cables, nuts, bolts, clamps,etc.The inverter shall be conforming to IS: 13314 with any latest amendment & the lead acid battery shall be conforming to IS: 15549 with latest amendment. Make of Inverter preferably shall be of Luminous, Microtek, V-Guard, Liv Fast etc. & Make of Battery shall be of Exide, Luminous, Liv Fast, Maxx, V-Guard, Microtek, Amaron etc. |
| 110 | Supply, installation, testing & commissioning of Submersible water pump for Borewell with 1 Set of 1 HP Submersible Pump, Submersible Water Pipe: 350 Feets , Submersible Power Cable: 350 Feets , 1 Set of Pump Starter with Water Level Controller. It includes requisite minor civil works to provision the water pump in existing Tubewell. The material to be used shall be reputed make & should be conforming to relevant IS. |
