Tender For Epa (Construction Of Ladies Toilet, Gents Toilet And Tourist Facilities At Pratap Bandh) - 1 Earth work in excavation/ by mechanical means (HydraulicExcavator)/ manual means over areas (exceeding 30 cm indepth, 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed Ordinary rock 2 Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding1.5 m in width or 10 sqm on plan including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected with a lead in a 50 meter including stacking of usefulmaterial if available Ordinary rockDrainage, Outer Main Wall, Partition Wall , Let, Changing Room,, Feeding Room Walls total work 45.46 cum 3 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)Outer Main Wall, Partition Wall , Let, Changing Room,, Feeding Room Walls total work 2.82 cum 4 Random Rubble stone masonry for with hard stone inFoundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:3 ( 1-Cement : 3-Sand).Total work 21.26 cum 5 Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). total work 1.42 cum 6 Random rubble dry stone Kharanja under floor. Total work 2.94 cum 7 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). As above For Floor 8 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50mm thick ( Plinth & Floor Complete ) 9 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in allshapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) – total work 21.03 cum 10 Providing and laying in position specified grade of cementconcrete for RCC structural elements up to floor five levelincluding curing, compaction, finishing with rendering incement sand mortar 1:3 (1 cement: 3 coarse sand) and makinggood the joints and cost of plastizers (if required ) excludingthe cost of centering, shuttering and reinforcement for Walls(any thickness) including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments,Posts and struts etc. M20 grade Nominal Mix / Design Mix 11 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix ( Including Chajjas) 12 Centering & shuttering with plywood or steel sheets includingstrutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 13 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props andremoval of formwork for upto floor five level forWalls (any thickness) including attached pilasters,buttresses plinth and string course. 14 Providing and fabricating reinforcement for R.C.C. workincluding straightening, cutting, bending, placing in positionand binding (including cost of binding wire) all complete up tofloor five levelCold twisted deformed bars (IS : 1786). 15 Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50mm thick ( Plinth & Floor Complete ) 16 Plaster on new surface on walls in cement sand mortar 1:3 including racking of joint etc. complete fine finish: 20mm thick. 17 P & F 1st qualityVitrified Porcelain Polished tiles on floor,skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm. Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. 18 Providing and fixing 75 mm wide Decorative Border in different shades and in all coloures in glazed tiles laid over 12 mm thickbed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. (Excluding Doors ) 19 Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesceramic glazed vitrified tiles with water absortion less than orequal to 0.08% confirming to IS:13753 & IS : 15622 on walls,pillars etc. laid on a bed of neat cement slurry finished withflush pointing in the white cement mixed with pigment tomatch the shade of the tile complete (excluding the cost ofcement plaster on walls and pillar). Size 600mm x 1200mm 20 Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed BlackAbove 3601 Cm2 Slabs 21 Extra for providing edge moulding to 15-18mm thick marble/Granite/Kota stone counters, Vanities etc. including machinepolishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone WorkFull Edge moulding 22 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters andsimilar location in marble/Granite/stone work includingnecessary holes for pillar taps etc. including rubbing andpolishing of cut edges etc. complete 23 Construction Of StairsExcavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding1.5 m in width or 10 sqm on plan including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected with a lead in a 50 meter including stacking of usefulmaterial if available Ordinary rock 24 Random rubble dry stone Kharanja under floor. 25 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). As above 26 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in allshapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) – Stairs Width 30 Cm Height 15 Cm 27 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: 20mm thick. 28 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Above 3601 Cm2 Slabs 29 Extra for providing edge molding to 15-18mm thick marble/Granite/Kota stone counters, Vanities etc. including machinepolishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work- Half Edge molding 30 Construction of septic Tank in all types of soil with 40 Cm.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c.floor, 50 mm thick stone slab partition walls, 20 mm thickplaster in CM 1:6 finished with neat floating cement, 4 Nosstone foot rests of approved design ,two No. 450 mm dia eachFerro cement cover with frame, earthwork etc. complete asper approved drawing including disposal of surplus earthwithin a lead of 50 mtr:- Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. 31 Providing & Fixing premium qulaity WVC Urinal with PVCwaste pipe, dome couplings, concealed iron brackets or screwsetc. complete. Flat Back (large) or half stall size 590x375x390 32 Providing & Fixing Premium Quality white glazed vitreouschina Sanitary Wares (IS:2556 Mark) of approved make as perdirection of Engineer-in-charge including cutting and makinggood the wall and floor. Double Syphonic European W.C. with mounted W.V.C. flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover. 33 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703mark) complete including cutting and making good the wallWVC with C.P. brass bend. 34 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc completeFlat Back (large) or half stall size 610x400x80mm 35 Providing & Fixing premium qulaity W.V.C. Urinal Partitionplate of size 630x315 mm 36 P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mmC.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, P.V.C Waste pipe with PVC nut32 mm complete including cutting & making good the wall- Size 550 mm x 400 mm dia for counter top 37 P & F Bevelled edge Mirror/mirror with teak wood lippingaround of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other Sizes 38 P & F PVC Storage Tank ISI Marked (IS : 12701) indicatingthe BIS license No), of approved make with cover, 25mm dia1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-) 39 Hoisting Charges for each floor : For items 2.26.5 to 2.26.8 40 P & F Toilet Paper Holder with rod of approved quality/make: C.P. brass heavy & Superior quality 41 P & F Liquid Soap Container with brackets complete of approved make: C.P. brass 42 P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of approved make as per direction of Engineer-in-Charge 43 P & F Push Cock superior quality, of approved makes’. Brass 15 mm. 44 P & F Inlet Connection (Angle Valves) Superior quality, of Approved make, for Wash basin, Geyser etc. C.P. Inlet connection with 60 cm long thread and nut 45 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make: C.P. Pillar cock, Swan-neck with casted spout, 15mm nominalbore. 46 Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only- 2 Main Channel Gate 47 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standardtubular / appropriate Z sections and other sections of approvedmake conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc.Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron)2 Main Doors, 6 Doors, 9 Ventilators 48 Providing and fixing glazing in aluminum door, window ,ventilator shutters and partitions etc. with PVS / neoprenegasket etc. complete as per the architectural drawings and thedirections of engineer-in-charge.(Cost of aluminum snapbeading shall be paid in basic item.) With float glass panes of 8 mm thickness 49 Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture IS : 6315 marked, for doorsIncluding cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate 50 Filling the gap up to 5 mm depth and 5 mm width in betweenaluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approvedQuality as per architectural drawings and direction of Engineering-charge complete. 51 Providing and fixing 100mm brass locks (best make of approved quality) for aluminum doors including necessary cutting and makinggood etc. complete. 52 Providing and fixing aluminum U shape handle of size 100mm withSS screws etc. Complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminum 53 Providing and fixing expanded grill made of aluminum as per designand drawing having members section of size 7.5mm x 6.0mm andopening of size 102mm x 99mm to aluminum window/vent withrequired screws, Y and H aluminum section (as per drawing) at theends and middle joints respectively complete in all respect as perdirection of engineer in charge. Powder coating aluminum ( minimum thickness of powder coating50 micron) For Ventilators 54 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to thealuminum window by Aluminum beading 20x3mm with suitablescrews not exceeding 150mm distance at all heights with all lead andlift with scaffolding. 55 Applying one coat of Cement primer of approved brand andmanufacture on wall surface including all scaffolding: 56 Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including all scaffolding: Two or more coats on new work including preparation of base with primer, putty, lippy etc complete in all respect 57 Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available Ordinary rock 58 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 59 Random Rubble stone masonry for with hard stone inFoundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:3 ( 1-Cement : 3-Sand). 60 Random Rubble stone masonry with hard stone in superstructureabove plinth level anduptofive level above 30cm. thick walls in :Cement Mortar 1:4 ( 1-Cement : 4-Sand). 61 AddextraforRandomRubblestonemasonrywithhardstone inSquare or Rectangular pillars 62 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 63 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: 20mm thick. 64 Interlocking Paver Blocks having 80 mm thickness in M-40 grade concrete Providing and Laying 80 mm thick cement concrete blocks of M-40 Grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds(Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick; Having Vibration and pressing action both together with the help ofmultiple synchronised vibrators. Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) spreading 25mm thick sand underneath and filling joints with sand on existing W.B.M.base, as per IS15658:2006 and all materials shall conform to MoRTH Specification Clause 602. 65 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 66 Random Rubble Dry Stone Kharanja Under Floor 15 Cm Thick. 67 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 68 Interlocking Paver Blocks having 80 mm thickness in M-40 grade concrete Providing and Laying 80 mm thick cement concrete blocks of M-40 Grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds(Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick; Having Vibration and pressing action both together with the help ofmultiple synchronised vibrators. Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) spreading 25mm thick sand underneath and filling joints with sand on existing W.B.M.base, as per IS15658:2006 and all materials shall conform to MoRTH Specification Clause 602. 69 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 70 Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes 71 Ceiling Fans 400 MM Sweep 72 Ceiling fan 1200 MM Sweep 73 Fresh Air Fans 300 MM Size 74 Electric Fitting 4 % 75 Supply & Fixing Of All Size Of PVC Pipes For Sanitary Fitting With Accessories. 76 Solar Panel 2 KW With Accessories For Electric Services
