Tender For Rcc Pole And Phase Wire Work In Municiapl Board Reengus , Supply And Erection Of P.C.C. Pole As Per Rec Manual No 15/1979 (Ammended Upto Date) And As Per Latest Discom Specifications With Factor Of Safety 2.5 Including Excavation Of Pit Upto Po, reengus-Rajasthan

Tender For Rcc Pole And Phase Wire Work In Municiapl Board Reengus , Supply And Erection Of P.C.C. Pole As Per Rec Manual No 15/1979 (Ammended Upto Date) And As Per Latest Discom Specifications With Factor Of Safety 2.5 Including Excavation Of Pit Upto Pole Planting Depth 1/6Th Of Pole Length. And Back Filling With Stone Aggregate/Boulders And Soil By Ramming And Watering Etc Complete As Required. All As Per Pre Approved By Engineer In-Charge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 9.0 Mtr Long Pcc Pole Of 200 Kg Working Load , Supply And Erection Of Gi Stay Set Confirming To Pattern-1 Of Bs:16/1974 And As Per Latest Discom Specifications Complete With Stay Rod With Anchor Plate Fitted With Cast Iron Cross Head And Steel Bow, In Cement Concrete 1:3:6 Including Excavation Of Pit-Re-Filling Etc Complete As Reqd. All As Per Pre Approved By Engineer Incharge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Stay Set Of Dia 16Mm, 1.8M Long Stay Rod And Anchor Plate 300 X 300 X 4.0 Mm , Supply And Fixing Of Following Lt Supporting Accessories With Nut Bolt & Clamps Made Out As Per Standard Discoms Specifications With Two Coats Of Red Oxide And Two Coats Of Aluminium Paint Etc. As Required. All As Per Pre Approved By Engineer In-Charge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Lt Cross Arm 600 Mm Long With Clamp , Supply And Fixing Of Lt Porcelain Shackle Insulator As Per Is:1443 1979 And As Per Discoms Standard Specifications, Suitable For Working Voltage 1100 Volts Including All Accessories Like Gi Hardware Fittings Confirming To Is:7935/1975 (Latest Amended) Nut, Bolt Etc. As Required. All As Per Pre Approved By Engineer Incharge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 100Mm X 110Mm , Supplying And Drawing Of Xlpe Insulated Lt Aerial Bunched Aluminium Conductor Cable Confirming To Is 14255/1995 And Is 398 (Pt-4)/ 1994 And As Per Discom Specs. On Existing Cross Arms Through I Hook With All Necessary T&P Required Including Binding And Twisting Etc. Complete In All Respect As Required. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 1 X 25 Sq. Mm. + 1X25 Sq. Mm. (Insulated) , Supplying And Laying Of Hot Dip Galvanized Steel Stay Wire Of 550- 900 N/Mm Quality Confirming To Is-2141/2000 In All Respect Including Chemical Composition (Heavily Coated Hard Quality) Of Dia 7/3.15 Mm(7/10 Swg) And As Per Latest Discom Specs. Etc. As Required. All As Per Pre Approved By Engineer In- Harge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy >=125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety , Power Factor >0.95 Driver Efficiency >85% ,Thd(I) <10% Humidity 10% To 90% Rh Working Temp -5C To 45C . Driver Current <750Ma. The Luminaire Shall Be Bis Certified And Trade Mark Certified. Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened , Cri >70 And Cct 5700K +355K. Surge Protection Shall Be Min = 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Nameengraved/ Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced.Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/ Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . Led Street Light Fixture With Minimum Lumen Output 2450 Lm , Led Street Light Fixture With Minimum Lumen Output 3700 Lm , Led Street Light Fixture With Minimum Lumen Output 8700 Lm , Providing & Fixing Of Street Light Bracket Made Out From Following Size Of B Class , Medium Class G.I. Pipe Confirming To Is : 1239 P - 1 ( 2004 ) With Heavy Duty Pole Clamp, Saddles Suitable Fastners Etc. As Required. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 25 Mm Dia. , 40 Mm Dia

INR 500 /-

INR 49900.0 /-

INR 24.95 Lakhs /-