|
| 1 | Providing and fixing G.I. union for G.I. pipe including cutting and threading the pipe and making long screw etc. complete. |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the same etc. as required at site. 50 mm |
| 3 | S/F of following sizes of medium class PVC conduit /batten along with all accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm |
| 4 | S/I/T/C of wall mounted starter panel powder coated dust and vermin proof 3 phase 4 wire system 415V 50 AC supply. The panel shall be made out of 16 gauge SWG 2 mm thick CRCA sheet with supported angle channel/ (incoming /outgoing cable/ wire suitable gland/ thimbles as required at site.) |
| 5 | Incoming250 amps MCCB 36 KA 3 pole-1 nos.OutgoingMNX 80 contactor-3 Nos.Relay 50-7 amps -1 Nos.Water sensor point -1 Nos. Single phase preventer – 1 Nos.Selector switch- 1 Nos.AM -0 -500A – 1 Nos. with suitable CT VM 0-500V – 1 Nos.CT 50/5 – 3 Nos.Indicating light (RYB) – 3 Nos. LEDThe main aluminium 250 amps bus bar shall be3 phase 4 wire system mounted on with shrinkable sleeve |
| 6 | S/F testing &commissioning of panel board 3 phase 4 wire system 415v, AC supply |
| 7 | Incoming1 No. VM 0-500V1 No. AM meter Analog 0-20V with in built selector switch 0-20 ampsOutgoing1 Nos. DOL starter 1 No. single phase preventer 1 no. OLRIndication light and ON/OFF button/ water sensorComplete with all accessories |
| 8 | Fully rewinding of following booster pump after cutting the existing winding with super enameled copper wire at the existing gauge i/c varnishing, heating etc. as required at site. |
| 9 | 7.5 HP booster pump (Grundfos) |
| 10 | 15 HP booster pump |
| 11 | Supplying and fixing of following mechanical seal for the existing pump and making connection etc. |
| 12 | 7.5 HP booster pump (Grundfos) |
| 13 | 4 HP booster pump (Grundfos) |
| 14 | Supplying and fixing of impellor gun metal for repairing of pump etc. as required. |
| 15 | 7.5 HP booster pump (Grundfos) |
| 16 | 15 HP booster pump(Brass impellor) |
| 17 | Providing and fixing ball bearing suitable for 7.5 booster pump etc. as required at site. (Stadium) |
| 18 | (A) 6308 |
| 19 | (B) 6306 |
| 20 | (C )6305 |
| 21 | Servicing of existing 60 HP Hydent pump 3 phase 415 volts including changing of bearing 6312, varnishing, heating leth work and making screw, complete etc. as required at site. |
| 22 | Repairing of existing 15 HP Jockey pump 3phase 415 Volts including changing of bearing 6308 impellor, mechanical seal, varnishing , heating leth work and making screw, complete etc. as required at site. |
| 23 | Removing of existing pump for repairing (booster and irregation pump) and refixing the same etc. as required at site. |
| 24 | S/F of 3x1.5 PVC insulated PVC sheathed copper conductor flexible cable i/c connection etc. as required. |
| 25 | S/F of 3x4 PVC insulated PVC sheathed copper conductor flexible cable i/c connection etc. as required. |
| 26 | Providing and fiixng of 3HP sewage cutter pump three phase outlet size 50 mm 240 volts discharge range 550-150with 3000 RPM and including making connection with all accessories etc. as required at site. (Model No. CCPM32-14) (Crompton) |
| 27 | Providing and fixing of water level sensor for the existing pump etc. as required at site. (KSB) |
| 28 | Providing and fixing of TP MCB 32 amps in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
